Embedded surface relief gratings by a simple method to improve absorption and electrical properties of polymer solar cells.

We demonstrate a simple rubbing hole injection layer (HIL) to form surface relief gratings (SRGs) on the functional layers of polymer solar cells (PSCs). PSCs studied in this work consist of an ITO/PEDOT:PSS(HIL)/P3HT:PCBM(photoactive layer)/LiF/Al structure. SRGs are successfully formed on HIL in an effective rubbing process, and are over printed on the photoactive layer and cathode consequently. These triplet SRGs change the morphologies of interfaces of PSCs, which can increase optical path lengths, interaction between HIL and P3HT chains, and interface areas between electrode and photoactive layer. Both light trapping and electrical improvement are confirmed by theory and experiments, which lead to overall increase in short-circuit current density, fill factor, and power conversion efficiency (PCE) of PSCs. An average PCE of 3.8% is achieved from PSCs with SRGs without thermal annealing. Different from the directly rubbing the donor polymer film, a suitable degree of orientation of P3HT presents a lower dichroic ratio and higher photovoltaic response in our work.

[1]  Valentin D. Mihailetchi,et al.  Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar Cells , 2006 .

[2]  Xiong Gong,et al.  New Architecture for High‐Efficiency Polymer Photovoltaic Cells Using Solution‐Based Titanium Oxide as an Optical Spacer , 2006 .

[3]  S. W. Cho,et al.  The electronic structure of C60/ZnPc interface for organic photovoltaic device with blended layer architecture , 2010 .

[4]  Juhwan Kim,et al.  Efficient Polymer Solar Cells with Surface Relief Gratings Fabricated by Simple Soft Lithography , 2008 .

[5]  Bong-Gi Kim,et al.  Effective variables to control the fill factor of organic photovoltaic cells. , 2009, ACS applied materials & interfaces.

[6]  C. Ha,et al.  Influence of electron-donating polymer addition on the performance of polymer solar cells , 2008 .

[7]  W. Whang,et al.  All-solution-processed inverted polymer solar cells on granular surface-nickelized polyimide , 2009 .

[8]  H. Ye,et al.  Highly polarized white-light emission from a single copolymer based on fluorene , 2008 .

[9]  Yang Yang,et al.  Polymer solar cells with enhanced open-circuit voltage and efficiency , 2009 .

[10]  Gang Li,et al.  For the Bright Future—Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4% , 2010, Advanced materials.

[11]  Yang Yang,et al.  Polarizing Organic Photovoltaics , 2011, Advanced materials.

[12]  Yi Cui,et al.  Solution-processed metal nanowire mesh transparent electrodes. , 2008, Nano letters.

[13]  Yoon-Chae Nah,et al.  Plasmon enhanced performance of organic solar cells using electrodeposited Ag nanoparticles , 2008 .

[14]  Rene Lopez,et al.  Electrophotonic enhancement of bulk heterojunction organic solar cells through photonic crystal photoactive layer , 2009 .

[15]  D. Choi,et al.  Effect of the ordered 2D-dot nano-patterned anode for polymer solar cells , 2010 .

[16]  Max Shtein,et al.  Flexible conjugated polymer photovoltaic cells with controlled heterojunctions fabricated using nanoimprint lithography , 2007 .

[17]  R. Curry,et al.  Low cost patterning of poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) films to increase organic photovoltaic device efficiency , 2008 .

[18]  Jea-Gun Park,et al.  Effect of interface thickness on power conversion efficiency of polymer photovoltaic cells , 2009 .

[19]  Rakesh A. Afre,et al.  Enhanced photovoltaic device performance upon modification of indium tin oxide coated glass by liquid nitrogen treatment , 2009 .

[20]  X. Liu,et al.  Determination of the optical constants of polymer light-emitting diode films from single reflection measurements , 2008, Journal of Physics D: Applied Physics.

[21]  Bernard Geffroy,et al.  Implementation of submicrometric periodic surface structures toward improvement of organic-solar-cell performances , 2006 .

[22]  Jamie D. Phillips,et al.  Optimization of random diffraction gratings in thin-film solar cells using genetic algorithms , 2008 .

[23]  Lei Zhang,et al.  Photonic crystal geometry for organic solar cells. , 2009, Nano letters.

[24]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .

[25]  Gang Li,et al.  Fast-Grown Interpenetrating Network in Poly(3-hexylthiophene): Methanofullerenes Solar Cells Processed with Additive , 2009 .

[26]  D. Fichou,et al.  Influence of molecular orientation on the photovoltaic properties of octithiophene , 1999 .

[27]  X. Liu,et al.  Tunable Fabry-Perot interferometer from ferroelectric polymer based on surface energy modification. , 2010, Optics express.

[28]  A J Heeger,et al.  Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. , 2007, Nature materials.

[29]  T. Gaylord,et al.  Analysis and applications of optical diffraction by gratings , 1985, Proceedings of the IEEE.