Review Paper: Review of Instrumentation for Irradiation Testing of Nuclear Fuels and Materials

Abstract Over 50 years of nuclear fuels and materials irradiation testing has led to many countries developing significant improvements in instrumentation to monitor physical parameters and to control the test conditions in material test reactors (MTRs). Recently, there is increased interest to irradiate new materials and reactor fuels for advanced pressurized water reactors and Gen-IV reactor systems, such as sodium-cooled fast reactors, very high temperature reactors, supercritical water–cooled reactors, and gas-cooled fast reactors. This review paper documents the current state of instrumentation technologies in MTRs in the world and summarizes ongoing research efforts to deploy new sensors. As described in this paper, a wide range of sensors is available to measure key parameters of interest during fuels and materials irradiations in MTRs. Ongoing development efforts focus on providing MTR users a wider range of parameter measurements with smaller, higher accuracy sensors.

[1]  A. L. Tomashuk,et al.  Radiation assessment of hydrogen-loaded aluminium-coated pure silica core fibres for ITER plasma diagnostic applications , 2007 .

[2]  Bernhard R. Tittmann,et al.  Influence of temperature on in-situ guided wave inspection and health monitoring of a rectangular bar specimen , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[3]  Lance Lewis Snead,et al.  Revisiting the Use of SiC as a Post Irradiation Temperature Monitor , 2004 .

[4]  R. Blackstone,et al.  The expansion of silicon carbide by neutron irradiation at high temperature , 1971 .

[5]  P. Prelovšek,et al.  Generalised hot wire method for thermal conductivity measurements , 1984 .

[6]  U. S. Doe.  A Technology Roadmap for Generation IV Nuclear Energy Systems , 2002 .

[7]  B. Brichard,et al.  High Level Gamma and Neutron Irradiation of Silica Optical Fibers in CEA OSIRIS Nuclear Reactor , 2008, IEEE Transactions on Nuclear Science.

[8]  Donald R. Olander,et al.  Nuclear fuels - Present and future , 2009 .

[9]  D. Fourmentel,et al.  Improving High-Temperature Measurements in Nuclear Reactors with Mo/Nb Thermocouples , 2008 .

[10]  R. Price.  ANNEALING BEHAVIOR OF NEUTRON-IRRADIATED SILICON CARBIDE TEMPERATURE MONITORS. , 1972 .

[11]  J. Lapetite,et al.  New Temperature Monitoring Devices for High-Temperature Irradiation Experiments in the High Flux Reactor Petten , 2011, IEEE Transactions on Nuclear Science.

[12]  G. F. Lynch,et al.  Characterization of Platinum Self-Powered Detectors , 1977, IEEE Transactions on Nuclear Science.

[13]  Steinar Solstad,et al.  Instrument Capabilities and Developments at the Halden Reactor Project , 2011 .

[14]  David L. Griscom,et al.  Defects in SiO[2] and related dielectrics : science and technology , 2000 .

[15]  L. Vermeeren,et al.  Reasons why Plutonium 242 is the best fission chamber deposit to monitor the fast component of a high neutron flux , 2008 .

[16]  Bernhard R. Tittmann,et al.  Finite Element Analysis of Ultrasonic Methods for In-Situ Monitoring of AN Astm Creep Specimen , 2009 .

[17]  Bong Goo Kim,et al.  DEVELOPMENT STATUS OF IRRADIATION DEVICES AND INSTRUMENTATION FOR MATERIAL AND NUCLEAR FUEL IRRADIATION TESTS IN HANARO , 2010 .

[18]  M. A. Fütterer,et al.  Results of AVR fuel pebble irradiation at increased temperature and burn-up in the HFR Petten , 2008 .

[19]  N. Ghoniem,et al.  A swelling model for stoichiometric SiC at temperatures below 1000°C under neutron irradiation , 1997 .

[20]  S. J. Park,et al.  Instrumentation for Materials Irradiation Tests in Hanaro , 2011 .

[21]  L. Snead,et al.  Silicon Carbide Temperature Monitor Measurements at the High Temperature Test Laboratory , 2010 .

[22]  R. Craig Knight,et al.  Irradiation testing of a niobium-molybdenum developmental thermocouple , 2008 .

[23]  Francis Berghmans,et al.  Fibre-optic gamma-flux monitoring in a fission reactor by means of Cerenkov radiation , 2007 .

[24]  M. D. Ghodgaonkar,et al.  Development of an inconel self powered neutron detector for in-core reactor monitoring , 2007 .

[25]  Kevin Hesketh,et al.  Advanced fuel designs for existing and future generations of reactors: driving factors from technical and economic points of view , 2003 .

[26]  Martin R. Okos,et al.  Improved Line Heat Source Thermal Conductivity Probe , 1981 .

[27]  M. A. Fütterer,et al.  Next generation fuel irradiation capability in the High Flux Reactor Petten , 2009 .

[28]  J. Kestin,et al.  The theory of the transient hot-wire method for measuring thermal conductivity , 1976 .

[29]  D. L. Knudson,et al.  Instrumentation to Enhance Advanced Test Reactor Irradiations , 2009 .

[30]  J. Villard,et al.  Innovations for In-Pile Measurements in the Framework of the CEA-SCK•CEN Joint Instrumentation Laboratory , 2009, IEEE Transactions on Nuclear Science.

[31]  Krishpersad Manohar,et al.  Measurement of apparent thermal conductivity by the thermal probe method , 2000 .

[32]  Acoustic sensor for in-pile fuel rod fission gas release measurement , 2009, 2009 1st International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications.

[33]  J. Villard,et al.  Innovative in-pile instrumentation developments for irradiation experiments in MTRs , 2005 .

[34]  V. C. Howard,et al.  CHANGES INDUCED IN POLYCRYSTALLINE ALUMINA BY FAST NEUTRON IRRADIATION. , 1967 .

[35]  Linards Skuja,et al.  Defects in oxide glasses , 2005 .

[36]  M. Balarin.  Zur Temperaturabhängigkeit der Strahlensättigung in SiC , 1965 .

[37]  A. L. Tomashuk,et al.  Radiation-hardening techniques of dedicated optical fibres used in plasma diagnostic systems in ITER , 2004 .

[38]  J-F. Villard,et al.  Advanced In-Pile Measurements of Fast Flux, Dimensions, and Fission Gas Release , 2011 .

[39]  K. Verfondern,et al.  Irradiation performance and modeling of HTR-10 coated fuel particles , 2006 .

[40]  J. D. Eichenberg,et al.  MEASUREMENT OF THE THERMAL CONDUCTIVITY OF METAL-CLAD URANIUM OXIDE RODS DURING IRRADIATION , 1961 .

[41]  David L. Griscom,et al.  THE NATURES OF POINT DEFECTS IN AMORPHOUS SILICON DIOXIDE , 2000 .

[42]  John Crepeau,et al.  Options Extending the Applicability of High-Temperature Irradiation-Resistant Thermocouples , 2009 .

[43]  P. Bennett,et al.  In-core corrosion monitoring in the Halden test reactor , 2008 .

[44]  T. Yano,et al.  Effects of Thermal Annealing on the Macroscopic Dimension and Lattice Parameter of Heavily Neutron-Irradiated Silicon Carbide , 1992 .

[45]  J. L. Rempe,et al.  Hot Wire Needle Probe for In-Pile Thermal Conductivity Detection , 2001 .

[46]  Tsunemi Kakuta,et al.  Optical properties in fibers during irradiation in a fission reactor , 1995 .

[47]  R. Van Nieuwenhove,et al.  In-core fuel performance and material characterization in the Halden reactor , 2009, 2009 1st International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications.

[48]  Timothy Abram,et al.  A Technology Roadmap for Generation-IV Nuclear Energy Systems, USDOE/GIF-002-00 , 2002 .

[49]  M. K. Meyer,et al.  ATR NSUF Instrumentation Enhancement Efforts , 2011 .

[50]  Xin-Gang Liang,et al.  The boundary induced error on the measurement of thermal conductivity by transient hot wire method , 1995 .

[51]  D. Magallon,et al.  Ultrasonic High-Temperature Sensors: Past Experiments and Prospects for Future Use , 2010 .

[54]  E. A. Little,et al.  Development of radiation resistant materials for advanced nuclear power plant , 2006 .

[55]  W. Marsden.  I and J , 2012 .

[56]  Y. Katoh,et al.  Handbook of SiC properties for fuel performance modeling , 2007 .

[57]  Michael A. Fu¨tterer,et al.  Preliminary Results of the HFR-EU1 Fuel Irradiation of INET and AVR Pebbles in the HFR Petten , 2008 .

[58]  Gregory K. Miller,et al.  Key differences in the fabrication, irradiation and high temperature accident testing of US and German TRISO-coated particle fuel, and their implications on fuel performance , 2003 .

[59]  L. Snead,et al.  Comparison Measurements of Silicon Carbide Temperature Monitors , 2010, IEEE Transactions on Nuclear Science.

[60]  G. H. Broomfield.  The effect of low-fluence neutron irradiation on silver-electroded lead-zirconate-titanate piezoelectric ceramics , 1980 .

[61]  D. L. Knudson,et al.  New Sensors for In-Pile Temperature Measurement at the Advanced Test Reactor National Scientific User Facility , 2011 .

[62]  M. Drigert,et al.  Design of an on-line, multi-spectrometer fission product monitoring system (FPMS) to support advanced gas reactor (AGR) fuel testing and qualification in the advanced test reactor , 2005, IEEE Nuclear Science Symposium Conference Record, 2005.

[63]  Wolfgang Wiesenack,et al.  The OECD Halden reactor project fuels testing programme: methods, selected results and plans ☆ , 2001 .

[64]  A. Ioachim,et al.  Accelerate ageing of PZT-type ceramics , 2007 .

[65]  K. G. Condie,et al.  Thermocouples for High-Temperature In-Pile Testing , 2005 .

[66]  A. L. Tomashuk,et al.  Round-robin irradiation test of radiation resistant optical fibers for ITER diagnostic application , 2002 .

[67]  Francis Berghmans,et al.  Origin of the radiation-induced OH vibration band in polymer-coated optical fibers irradiated in a nuclear fission reactor , 2002 .

[68]  M Weber,et al.  Experimental Verification of the Fission Chamber Gamma Signal Suppression by the Campbelling Mode , 2011, IEEE Transactions on Nuclear Science.