Nonlinear Dynamic Analysis on Planetary Gears-Rotor System in Geared Turbofan Engines

Rotor fatigue and gear noise triggered by nonlinear vibration are the key concerns in Geared Turbofan (GTF) engine which features a new configuration by introducing planetary gears into low-pressur...

[1]  Avinash Singh,et al.  Load sharing behavior in epicyclic gears: Physical explanation and generalized formulation , 2010 .

[2]  Robert G. Parker,et al.  Vibration modes of planetary gears with unequally spaced planets and an elastic ring gear , 2010 .

[3]  Robert G. Parker.  Vibration of Planetary Gears With Elastically Deformable Ring Gears Parametrically Excited by Mesh Stiffness Fluctuations , 2009 .

[4]  Hui Ma,et al.  Time-varying mesh stiffness calculation of cracked spur gears , 2014 .

[5]  Shiyu Wang,et al.  Instantaneous mode contamination and parametric combination instability of spinning cyclically symmetric ring structures with expanding application to planetary gear ring , 2016 .

[6]  Ahmet Kahraman,et al.  Experiments on Nonlinear Dynamic Behavior of an Oscillator With Clearance and Periodically Time-Varying Parameters , 1997 .

[7]  Yue Zhang,et al.  Nonlinear Dynamics of a Multistage Gear Transmission System with Multi-Clearance , 2018, Int. J. Bifurc. Chaos.

[8]  Ming J. Zuo,et al.  Dynamic modeling of gearbox faults: A review , 2018 .

[9]  Donald R. Houser,et al.  Mathematical models used in gear dynamics—A review , 1988 .

[10]  Ahmet Kahraman,et al.  Natural Modes of Planetary Gear Trains , 1994 .

[11]  P. Velex,et al.  Dynamic Response of Planetary Trains to Mesh Parametric Excitations , 1996 .

[12]  Cai-Wan Chang-Jian,et al.  Bifurcation and chaos analysis of spur gear pair with and without nonlinear suspension , 2011 .

[13]  Ahmet Kahraman,et al.  Load sharing characteristics of planetary transmissions , 1994 .

[14]  Nan Gao,et al.  Dynamic analysis of a planetary gear system with multiple nonlinear parameters , 2018, J. Comput. Appl. Math..

[15]  Robert G. Parker,et al.  PLANETARY GEAR PARAMETRIC INSTABILITY CAUSED BY MESH STIFFNESS VARIATION , 2002 .

[16]  Robert G. Parker,et al.  Dynamic modeling and analysis of a spur planetary gear involving tooth wedging and bearing clearance nonlinearity , 2010 .

[17]  Avinash Singh,et al.  An Experimental Study of the Influence of Manufacturing Errors on the Planetary Gear Stresses and Planet Load Sharing , 2008 .

[18]  Robert G. Parker,et al.  Mesh Phasing Relationships in Planetary and Epicyclic Gears , 2004 .

[19]  Fakher Chaari,et al.  Influence of manufacturing errors on the dynamic behavior of planetary gears , 2006 .

[20]  An Sung Lee,et al.  Coupled lateral and torsional vibration characteristics of a speed increasing geared rotor-bearing system , 2003 .

[21]  Yaguo Lei,et al.  A probability distribution model of tooth pits for evaluating time-varying mesh stiffness of pitting gears , 2018, Mechanical Systems and Signal Processing.

[22]  Fulei Chu,et al.  Load-sharing characteristics of planetary gear transmission in horizontal axis wind turbines , 2015 .

[23]  Robert G. Parker,et al.  Suppression of Planet Mode Response in Planetary Gear Dynamics Through Mesh Phasing , 2006 .

[24]  Yimin Shao,et al.  Dynamic simulation of planetary gear set with flexible spur ring gear , 2013 .

[25]  Robert G. Parker,et al.  A PHYSICAL EXPLANATION FOR THE EFFECTIVENESS OF PLANET PHASING TO SUPPRESS PLANETARY GEAR VIBRATION , 2000 .

[26]  Fulei Chu,et al.  Steady-state response of a geared rotor system with slant cracked shaft and time-varying mesh stiffness , 2014, Commun. Nonlinear Sci. Numer. Simul..

[27]  Robert G. Parker,et al.  Analytical Solution for the Nonlinear Dynamics of Planetary Gears , 2011 .

[28]  Tao Sun,et al.  Nonlinear dynamics of a planetary gear system with multiple clearances , 2003 .

[29]  Tang Jinyuan,et al.  Nonlinear dynamic characteristics of geared rotor bearing systems with dynamic backlash and friction , 2011 .

[30]  Yimin Shao,et al.  Dynamic simulation of planetary gear with tooth root crack in ring gear , 2013 .

[31]  Linda Larsson,et al.  Conceptual Design and Mission Analysis for a Geared Turbofan and an Open Rotor Configuration , 2011 .

[32]  Zaigang Chen,et al.  Mesh stiffness of an internal spur gear pair with ring gear rim deformation , 2013 .

[33]  Xavier Ruiz,et al.  CLEAN - Validation of a High Efficient Low NOx core, a GTF High Speed Turbine and an Integration of a Recuperator in an Environmental Friendly Engine Concept , 2005 .

[34]  Robert G. Parker,et al.  Structured vibration characteristics of planetary gears with unequally spaced planets , 2000 .

[35]  Teik C. Lim,et al.  Non-linear dynamic simulation of gear response under the idling condition , 2012 .

[36]  S. Narayanan,et al.  Bifurcation and chaos in geared rotor bearing system by incremental harmonic balance method , 1999 .