Deriving Merchantable Volume in Poplar through a Localized Tapering Function from Non-Destructive Terrestrial Laser Scanning

Timber volume is an important ecological component in forested landscapes. The application of terrestrial laser scanning (TLS) to volume estimation has been widely accepted though few species have well-calibrated taper functions. This research uses TLS technology in poplar (Populus × canadensis Moench cv. ‘I-72/58’) to extract stem diameter at different tree heights and establish the relationship between point cloud data and stem curve, which constitutes the basis for volume estimation of single trees and the stand. Eight plots were established and scanned by TLS. Stem curve functions were then fitted after extraction of diameters at different height, and tree heights from the point cloud data. Lastly, six functions were evaluated by R2 and RMSE. A modified Schumacher equation was the most suitable taper function. Volume estimates from the TLS-derived taper function were better than those derived using the stem-analysis data. Finally, regression analysis showed that predictions of stem size were similar when data were based on TLS versus stem analysis. Its high accuracy and efficiency indicates that TLS technology can play an important role in forest inventory assessment.

[1]  Francesco Pirotti,et al.  Laser Scanner Applications in Forest and Environmental Sciences , 2012 .

[2]  F. M. Danson,et al.  Terrestrial Laser Scanning for Plot-Scale Forest Measurement , 2015, Current Forestry Reports.

[3]  M. James,et al.  Ultra‐rapid topographic surveying for complex environments: the hand‐held mobile laser scanner (HMLS) , 2014 .

[4]  N. Subedi,et al.  Evaluating Height-Age Determination Methods for Jack Pine and Black Spruce Plantations Using Stem Analysis Data , 2010 .

[5]  P. Radtke,et al.  Detailed Stem Measurements of Standing Trees from Ground-Based Scanning Lidar , 2006, Forest Science.

[6]  Yuwei Chen,et al.  Multiplatform Mobile Laser Scanning: Usability and Performance , 2012, Sensors.

[7]  M. Fukushima,et al.  On the Rate of Convergence of the Levenberg-Marquardt Method , 2001 .

[8]  Juha Hyyppä,et al.  Automated Stem Curve Measurement Using Terrestrial Laser Scanning , 2014, IEEE Transactions on Geoscience and Remote Sensing.

[9]  R. Bailey.  A compatible volume-taper model based on the Schumacher and Hall generalized constant form factor volume equation. , 1994 .

[10]  M. Vastaranta,et al.  Terrestrial laser scanning in forest inventories , 2016 .

[11]  S. Huang,et al.  Sensitivity of predictions of merchantable tree height, log production, and lumber recovery to tree taper , 2013 .

[12]  J. H. Smith,et al.  CRITICAL ANALYSIS OF MULTIVARIATE TECHNIQUES FOR ESTIMATING TREE TAPER SUGGESTS THAT SIMPLER METHODS ARE BEST , 1966 .

[13]  F. Schumacher.  Logarithmic expression of timber-tree volume , 1933 .

[14]  Lichun Jiang,et al.  Compatible taper and volume equations for yellow-poplar in West Virginia , 2005 .

[15]  Masao Fukushima,et al.  Convergence Properties of the Inexact Levenberg-Marquardt Method under Local Error Bound Conditions , 2002, Optim. Methods Softw..

[16]  A. Kozak,et al.  My last words on taper equations , 2004 .

[17]  D. Hibbs,et al.  Taper Equation and Volume Tables for Plantation-Grown Red Alder , 2007 .

[18]  H. R. Gray,et al.  The form and taper of forest-tree stems , 1956 .

[19]  J. Gong,et al.  Comparison of the performance of several hybrid poplar clones and their potential suitability for use in northern China , 2011 .

[20]  H. Spiecker.  Tree rings and forest management in Europe , 2002 .

[21]  Ge Sun,et al.  Response of ecosystem carbon fluxes to drought events in a poplar plantation in Northern China , 2013 .

[22]  Naoto Matsumura,et al.  Representation of tree stem taper curves and their dynamic, using a linear model and the centroaffine transformation , 2007, Journal of Forest Research.

[23]  D. W. Ormerod,et al.  A simple bole model , 1973 .