Fine-grained fault recognition method for shaft orbit of rotary machine based on convolutional neural network

In the fault diagnosis of the shaft orbit of rotating machinery, there are few prejudgments about the severity of the faults, which is very important for fault repair. Therefore, a fine-grained recognition method is proposed to detect different severity faults by shaft orbit. Since different shaft orbits represent different type and different severity of faults, the convolutional neural network (CNN) is applied for identifying the shaft orbits to recognize the type and severity of the fault. The recognition rate of proposed fine-grained fault identification method is 97.96 % on the simulated shaft orbit database, and it takes only 0.31 milliseconds for the recognition of single sample. Experimental result indicated that the classification performance of the proposed method are better than the traditional machine learning models. Moreover, the method is applied for the identification of the measured shaft orbits of rotor with different degree of imbalance faults, and the testing accuracy of the experiments in measured shaft orbits is 97.14 %, which has verified the effectiveness of the proposed fine-grained fault recognition method.

[1]  Jitendra Malik,et al.  Shape matching and object recognition using shape contexts , 2010, 2010 3rd International Conference on Computer Science and Information Technology.

[2]  Li Yang,et al.  Automatic Identification of Shaft Orbits for Steam Turbine Generator Sets , 2009, 2009 WRI Global Congress on Intelligent Systems.

[3]  Geoffrey E. Hinton,et al.  ImageNet classification with deep convolutional neural networks , 2012, Commun. ACM.

[4]  Hee-Jun Kang,et al.  Rolling element bearing fault diagnosis using convolutional neural network and vibration image , 2019, Cognitive Systems Research.

[5]  Bo Fu,et al.  Identification of the shaft orbits for turbine rotor by modified Fourier descriptors , 2004, Proceedings of 2004 International Conference on Machine Learning and Cybernetics (IEEE Cat. No.04EX826).

[6]  Vasikan Vijayashanthar,et al.  Modeling Fecal Indicator Bacteria in Urban Waterways Using Artificial Neural Networks , 2018, Journal of Environmental Engineering.

[7]  Hongkai Jiang,et al.  An adaptive deep convolutional neural network for rolling bearing fault diagnosis , 2017 .

[8]  Fan Xu,et al.  Roller bearing fault diagnosis using stacked denoising autoencoder in deep learning and Gath-Geva clustering algorithm without principal component analysis and data label , 2018, Appl. Soft Comput..

[9]  Yoshua Bengio,et al.  Gradient-based learning applied to document recognition , 1998, Proc. IEEE.

[10]  Wei Gao,et al.  A Novel Fault Diagnosis Method for Rotating Machinery Based on a Convolutional Neural Network , 2018, Sensors.

[11]  Sebastian Ruder,et al.  An overview of gradient descent optimization algorithms , 2016, Vestnik komp'iuternykh i informatsionnykh tekhnologii.

[12]  Yongchuan Zhang,et al.  Identification of shaft orbit for hydraulic generator unit using chain code and probability neural network , 2012, Appl. Soft Comput..

[13]  Ning Jin,et al.  Multi-Step Short-Term Power Consumption Forecasting with a Hybrid Deep Learning Strategy , 2018, Energies.

[14]  Binqiang Chen,et al.  Noncontact Surface Roughness Estimation Using 2D Complex Wavelet Enhanced ResNet for Intelligent Evaluation of Milled Metal Surface Quality , 2018 .

[15]  Nicolas Le Roux,et al.  Ask the locals: Multi-way local pooling for image recognition , 2011, 2011 International Conference on Computer Vision.

[16]  Liang Guo,et al.  Machinery health indicator construction based on convolutional neural networks considering trend burr , 2018, Neurocomputing.

[17]  Junwei Wang,et al.  Shape matching and classification using height functions , 2012, Pattern Recognit. Lett..

[18]  Sun Hui-fan.  Review of identification of shaft orbit for rotating machinery , 2014 .

[19]  Geoffrey E. Hinton,et al.  Rectified Linear Units Improve Restricted Boltzmann Machines , 2010, ICML.

[20]  Junjie Yang,et al.  Mechanic signal analysis based on the Haar-type orthogonal matrix , 2009, Expert Syst. Appl..

[21]  Wei Gao,et al.  An Intelligent Fault Diagnosis Method for Bearings with Variable Rotating Speed Based on Pythagorean Spatial Pyramid Pooling CNN , 2018, Sensors.

[22]  Jie Zhao,et al.  Development of a LeNet-5 Gas Identification CNN Structure for Electronic Noses , 2019, Sensors.

[23]  Qi Zhang,et al.  Apply Low-Level Image Feature Representation and Classification Method to Identifying Shaft Orbit of Hydropower Unit , 2014, 2014 Sixth International Conference on Intelligent Human-Machine Systems and Cybernetics.

[24]  Weiming Shen,et al.  Bearing Fault Diagnosis Method Based on Deep Convolutional Neural Network and Random Forest Ensemble Learning , 2019, Sensors.

[25]  Jong-Myon Kim,et al.  Bearing Fault Diagnosis under Variable Speed Using Convolutional Neural Networks and the Stochastic Diagonal Levenberg-Marquardt Algorithm , 2017, Sensors.

[26]  Jun Guo,et al.  Vibrant fault diagnosis for hydroelectric generator units with a new combination of rough sets and support vector machine , 2012, Expert Syst. Appl..

[27]  Chen Lu,et al.  Intelligent fault diagnosis of rolling bearing using hierarchical convolutional network based health state classification , 2017, Adv. Eng. Informatics.

[28]  Shoudao Huang,et al.  Fault Diagnosis Based on an Approach Combining a Spectrogram and a Convolutional Neural Network with Application to a Wind Turbine System , 2018 .

[29]  Haibin Ling,et al.  Shape Classification Using the Inner-Distance , 2007, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[30]  Jianzhong Zhou,et al.  Fault diagnosis based on Walsh transform and support vector machine , 2008 .

[31]  Songlin Feng,et al.  Identification Method of Shaft Orbit in Rotating Machines Based on Accurate Fourier Height Functions Descriptors , 2018 .

[32]  Jian Xiao,et al.  Fault diagnosis based on comprehensive geometric characteristic and probability neural network , 2014, Appl. Math. Comput..