Free cooling of a building using PCM heat storage integrated into the ventilation system

Abstract This article presents a study of the free cooling of a low-energy building using a latent-heat thermal energy storage (LHTES) device integrated into a mechanical ventilation system. The cylindrical LHTES device was filled with spheres of encapsulated RT20 paraffin, a phase-change material (PCM). A numerical model of the LHTES was developed to identify the parameters that have an influence on the LHTES’s thermal response, to determine the optimum phase-change temperature and to form the LHTES’s temperature-response function. The last of these defines the LHTES’s outlet-air temperature for a periodic variation of the inlet ambient-air temperature and the defined operating conditions. The temperature-response function was then integrated into the TRNSYS building thermal response model. Numerical simulations showed that a PCM with a melting temperature between 20 and 22 °C is the most suitable for free cooling in the case of a continental climate. The analyses of the temperatures in a low-energy building showed that free cooling with an LHTES is an effective cooling technique. Suitable thermal comfort conditions in the presented case-study building could be achieved using an LHTES with 6.4 kg of PCM per square metre of floor area.

[1]  Fredrik Setterwall,et al.  Phase transition temperature ranges and storage density of paraffin wax phase change materials , 2004 .

[2]  Göran Hed,et al.  Mathematical modelling of PCM air heat exchanger , 2006 .

[3]  Boštjan Černe,et al.  The dynamic thermal characteristics of lightweight building elements with a forced ventilated cavity and radiation barriers , 2005 .

[4]  Antonio Casimiro Caputo,et al.  Heat Recovery from Moving Cooling Beds: Transient Modeling by Dynamic Simulation , 1999 .

[5]  Ursula Eicker,et al.  Limits and potentials of office building climatisation with ambient air , 2006 .

[6]  D. W. Etheridge,et al.  Novel ventilation cooling system for reducing air conditioning in buildings.: Part I: testing and theoretical modelling , 2000 .

[7]  C. Ghiaus,et al.  Potential for free-cooling by ventilation , 2006 .

[8]  L. Cabeza,et al.  Free-cooling of buildings with phase change materials , 2004 .

[9]  Sašo Medved,et al.  Efficiency of free cooling using latent heat storage integrated into the ventilation system of a low energy building , 2007 .

[10]  K. Nagano,et al.  Development of a ventilation system utilizing thermal energy storage for granules containing phase change material , 2004 .

[11]  Anica Trp,et al.  An experimental and numerical investigation of heat transfer during technical grade paraffin melting and solidification in a shell-and-tube latent thermal energy storage unit , 2005 .

[12]  Jiang Yi,et al.  Modeling and experimental study on an innovative passive cooling system—NVP system , 2003 .

[13]  C. P. Jeffreson.  Prediction of breakthrough curves in packed beds: I. Applicability of single parameter models , 1972 .

[14]  S. Medved,et al.  Influence of accuracy of thermal property data of a phase change material on the result of a numerical model of a packed bed latent heat storage with spheres , 2005 .

[15]  Wasim Saman,et al.  Thermal performance of PCM thermal storage unit for a roof integrated solar heating system , 2005 .