Monitoring of self-tapping screw fastenings using artificial neural networks

Screw fastenings account for a quarter of all assembly operations and automation of the process is highly desirable. This paper presents a novel strategy for monitoring this manufacturing process, focusing on the insertion of self-tapping screws. An artificial neural network (ANN), using Torque-versus-Insertion-Depth signature signals as input, is designed to distinguish between successful and failed insertions. The ANN is first tested using simulation data from an analytical model for screw insertions, and then validated using experimental torque signals obtained from an electric screwdriver. The results demonstrate that ANNs can effectively monitor the screw fastening process and cope with a wide range of insertion cases interpolating for unseen insertion signals.

[1]  L.J. Wang,et al.  A mechanical model for predicting critical thrust forces in drilling composite laminates , 2001 .

[2]  Kaspar Althoefer,et al.  Mechatronic strategies for torque control of electric powered screwdrivers , 2000 .

[3]  Takeshi Tsujimura,et al.  Adaptive force control of screwdriving with a positioning-controlled manipulator , 1991, Robotics Auton. Syst..

[4]  Lakmal Seneviratne,et al.  An experimental investigation of torque signature signals for self-tapping screws , 2000 .

[5]  M. Klingajay,et al.  Identification of threaded fastening parameters using the Newton Raphson Method , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[6]  Kaspar Althoefer,et al.  Use of artificial neural networks for the monitoring of screw insertions , 1999, Proceedings 1999 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human and Environment Friendly Robots with High Intelligence and Emotional Quotients (Cat. No.99CH36289).

[7]  Christopher M. Bishop,et al.  Neural networks for pattern recognition , 1995 .

[8]  Zhiqiang Gao,et al.  Fuzzy logic control of automated screw fastening , 1996 .

[9]  Lorenzo Bruzzone,et al.  Supervised training technique for radial basis function neural networks , 1998 .

[10]  Daniel E. Whitney,et al.  Computer-controlled Assembly , 1978 .

[11]  M. Matsumura,et al.  Tightening torque estimation of a screw tightening robot , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[12]  Kaspar Althoefer,et al.  Theoretical modelling of the self-tapping screw fastening process , 2001 .