Micromechanical circuits for communication transceivers

Micromechanical (or /spl mu/mechanical) communication circuits fabricated via IC-compatible MEMS technologies and capable of low-loss filtering, mixing, switching, and frequency generation, are described with the intent to miniaturize wireless transceivers. Receiver architectures are then proposed that best harness the tiny size, zero DC power dissipation, and ultra-high-Q of vibrating /spl mu/mechanical resonator circuits. Among the more aggressive architectures proposed are one based on a /spl mu/mechanical RF channel-selector and one featuring an all-MEMS RF front-end. These architectures maximize performance gains by using highly selective, low-loss /spl mu/mechanical circuits on a massive scale, taking full advantage of Q versus power trade-offs. Micromechanical filters, mixer-filters, and switchable synthesizers are identified as key blocks capable of substantial power savings when used in the aforementioned architectures. As a result of this architectural exercise, more focused directions for further research and development in RF MEMS are identified.

[1]  Anatol I. Zverev,et al.  Handbook of Filter Synthesis , 1967 .

[2]  Gabriel M. Rebeiz,et al.  Micromachined devices for wireless communications , 1998, Proc. IEEE.

[3]  Kun Wang,et al.  High-order medium frequency micromechanical electronic filters , 1999 .

[4]  R. Howe,et al.  An integrated CMOS micromechanical resonator high-Q oscillator , 1999, IEEE J. Solid State Circuits.

[5]  H. Tilmans,et al.  Electrostatically driven vacuum encapsulated polysilicon resonators , 1993 .

[6]  R. Howe,et al.  Post-CMOS integration of germanium microstructures , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[7]  G. R. Kline,et al.  Development of miniature filters for wireless applications , 1995, Proceedings of 1995 IEEE MTT-S International Microwave Symposium.

[8]  Ark-Chew Wong,et al.  Micromechanical Mixer+Filters , 1998 .

[9]  C. Nguyen,et al.  Frequency-selective MEMS for miniaturized low-power communication devices , 1999 .

[10]  Ark-Chew Wong,et al.  VHF free-free beam high-Q micromechanical resonators , 2000, Journal of Microelectromechanical Systems.

[11]  Cam Nguyen,et al.  Frequency trimming and Q-factor enhancement of micromechanical resonators via localized filament annealing , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[12]  R. Howe,et al.  Batch transfer of microstructures using flip-chip solder bonding , 1999 .

[13]  C. Nguyen,et al.  High-Q HF microelectromechanical filters , 2000, IEEE Journal of Solid-State Circuits.

[14]  S. Sherman,et al.  Fabrication technology for an integrated surface-micromachined sensor , 1993 .

[15]  S. Eshelman,et al.  Micromachined low-loss microwave switches , 1999 .

[16]  J. F. Parker,et al.  A 1.6-GHz CMOS PLL with on-chip loop filter , 1998, IEEE J. Solid State Circuits.

[17]  C. Nguyen,et al.  High frequency microelectromechanical IF filters , 1996, International Electron Devices Meeting. Technical Digest.

[18]  R. Howe,et al.  Vacuum encapsulation of resonant devices using permeable polysilicon , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[19]  D. Leeson.  A simple model of feedback oscillator noise spectrum , 1966 .

[20]  J. Bustillo,et al.  Surface micromachining for microelectromechanical systems , 1998, Proc. IEEE.

[21]  T.H. Lee,et al.  A 1.5 V, 1.5 GHz CMOS low noise amplifier , 1996, 1996 Symposium on VLSI Circuits. Digest of Technical Papers.

[22]  Michiel Steyaert,et al.  A 1.8-GHz low-phase-noise CMOS VCO using optimized hollow spiral inductors , 1997, IEEE J. Solid State Circuits.

[23]  Paul J. McWhorter,et al.  Embedded micromechanical devices for the monolithic integration of MEMS with CMOS , 1995, Proceedings of International Electron Devices Meeting.