Investigation of the effect of ZrO2 and ZrO2/Al2O3 additions on the hot-pressing and properties of equimolecular mixtures of α- and β-Si3N4

[1]  L. Garrido,et al.  Thermal shock behavior of dense mullite–zirconia composites obtained by two processing routes , 2008 .

[2]  Ning Liu,et al.  Thermal shock and thermal fatigue behavior of Si3N4–TiC nano-composites , 2008 .

[3]  G. Fantozzi,et al.  Thermo-mechanical properties of ceramics: Resistance to initiation and propagation of crack in high temperature , 2008 .

[4]  A. Mukhopadhyay,et al.  Pressureless sintering of ZrO2–ZrB2 composites: Microstructure and properties , 2007 .

[5]  D. Jia,et al.  Effect of hexagonal BN on the microstructure and mechanical properties of Si3N4 ceramics , 2007 .

[6]  F. Sergejev,et al.  Comparative study on indentation fracture toughness measurements of cemented carbides , 2006, Proceedings of the Estonian Academy of Sciences. Engineering.

[7]  Wei Guo Wang,et al.  Microstructures and properties of rapidly solidified Y2O3 doped Al2O3/ZrO2 composites prepared by combustion synthesis , 2006 .

[8]  I. Sevim,et al.  Abrasive wear behaviour of bio-active glass ceramics containing apatite , 2006 .

[9]  Jingxian Zhang,et al.  Synthesis of silicon nitride-barium aluminosilicate self-reinforced ceramic composite by a two-step pressureless sintering , 2005 .

[10]  Liping Huang,et al.  Microstructure and mechanical properties of silicon nitride ceramics prepared by pressureless sintering with MgO–Al2O3–SiO2 as sintering additive , 2005 .

[11]  Bikramjit Basu,et al.  Toughening of yttria-stabilised tetragonal zirconia ceramics , 2005 .

[12]  J. Vleugels,et al.  In situ formation of SiNO and TiN in SiN-based ceramic composites , 2005 .

[13]  Haitao Yang,et al.  Pressureless sintering of silicon nitride with Magnesia and Yttria , 2005 .

[14]  D. K. Kim,et al.  Effect of Grain Boundary Phase on Contact Damage Resistance of Silicon Nitride Ceramics , 2005 .

[15]  K.H.J. Buschow,et al.  Encyclopedia of Materials: Science and Technology , 2004 .

[16]  S. Ribeiro,et al.  Silicon nitride oxidation behaviour at 1000 and 1200 °C , 2004 .

[17]  Thanakorn Wasanapiarnpong,et al.  窒化ケイ素セラミックスの大気炉焼結(第2報) : つめ粉の凝集とアルミナるつぼの劣化 , 2004 .

[18]  Byong-Taek Lee,et al.  Effect of sintering additives on the nitridation behavior of reaction-bonded silicon nitride , 2004 .

[19]  N. Hirosaki,et al.  A comparative ab initio study of the ‘ideal’ strength of single crystal α- and β-Si3N4 , 2004 .

[20]  Y. Miyamoto,et al.  New synthesis route for Si2N2O ceramics based on desert sand , 2003 .

[21]  Cleydson B. R. Santos,et al.  Mechanical properties improvement related to the isothermal holding time in Si3N4 ceramics sintered with an alternative additive , 2003 .

[22]  C. Silva,et al.  Mechanical properties evaluation of hot-pressed Si3N4–SiC(w) composites , 2003 .

[23]  J. Dai,et al.  Effect of the residual phases in β-Si3N4 seed on the mechanical properties of self-reinforced Si3N4 ceramics , 2003 .

[24]  A. Bellosi,et al.  Advances in microstructure and mechanical properties of zirconium diboride based ceramics , 2003 .

[25]  S. Woo,et al.  Microwave reaction bonding of silicon nitride using an inverse temperature gradient and ZrO2 and Al2O3 sintering additives , 2003 .

[26]  V. Medri,et al.  Influence of additives content on the high temperature oxidation of silicon nitride based composites , 2003 .

[27]  S. Guo,et al.  Hot-pressed silicon nitride ceramics with Lu2O3 additives: elastic moduli and fracture toughness , 2003 .

[28]  M. Swain,et al.  Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials. , 2003, Journal of dentistry.

[29]  J. Gong,et al.  Variation in the indentation toughness of silicon nitride , 2002 .

[30]  Napsiah Ismail,et al.  A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components , 2002 .

[31]  R. Chen,et al.  Mechanical properties of Al2O3/ZrO2 composites , 2002 .

[32]  Jow-Lay Huang,et al.  The effects of ytterbium oxide on the microstructure and R-curve behaviors of silicon nitride , 2002 .

[33]  C. Cairo,et al.  Mechanical properties of ceramic composites , 2001 .

[34]  J. Hawk,et al.  Microstructure and abrasive wear in silicon nitride ceramics , 2001 .

[35]  J. Vleugels,et al.  Transformation behavior of yttria stabilized tetragonal zirconia polycrystal–TiB_2 composites , 2001 .

[36]  M. Albano.  Dispersion of aluminum hydroxide coated Si3N4 powders with ammonium polyacrylate dispersant , 2001 .

[37]  Heon-Jin Choi,et al.  Effects of additive amount on microstructure and mechanical properties of silicon carbide-silicon nitride composites , 2001 .

[38]  C. J. Lee,et al.  Effect of β-Si3N4 starting powder size on elongated grain growth in β-Si3N4 ceramics , 2000 .

[39]  R. Oberacker,et al.  Potential of the Sinter-HIP-technique for the Development of High-temperature Resistant Si3N4-ceramics , 1999 .

[40]  H. Kaya.  The application of ceramic-matrix composites to the automotive ceramic gas turbine , 1999 .

[41]  D. Baxter,et al.  Corrosion of a Dense, Low-additive Si3N4 in High Temperature Combustion Gases , 1998 .

[42]  N. Thadhani,et al.  Shock-enhanced alpha to beta phase transformation in Si3N4 powders , 1998 .

[43]  S. Kanzaki,et al.  Modeling and simulation of grain growth in Si3N4—II. The α–β transformation , 1998 .

[44]  K. Bamzai,et al.  Investigations on indentation induced hardness and fracture mechanism in flux grown DyAlO3 crystals , 1998 .

[45]  Heon-Jin Choi,et al.  High temperature strength and oxidation behaviour of hot-pressed silicon nitride-disilicate ceramics , 1997 .

[46]  Hugh O. Pierson,et al.  Handbook of Refractory Carbides and Nitrides: Properties, Characteristics, Processing and Applications , 1996 .

[47]  Yet-Ming Chiang,et al.  Physical ceramics : principles for ceramic science and engineering / Yet-Ming Chiang, Dunbar P. Birnie, W. David Kingery , 1996 .

[48]  M. Rahaman.  Ceramic Processing and Sintering , 1995 .

[49]  Byong-Taek Lee,et al.  Microstructure and fracture characteristic of Si3N4ZrO2(MgO) ceramic composite studied by transmission electron microscopy , 1995 .

[50]  L. Falk,et al.  Pressureless-sintered Si3N4-ZrO2 composites with Al2O3 and Y2O3 additions , 1990 .

[51]  M. Yoshimura,et al.  Phase stability of zirconia , 1988 .

[52]  L. Gauckler,et al.  The System Si3N4‐SiO2‐ZrN‐ZrO2 , 1979 .

[53]  E. Fuller,et al.  Equilibrium penny-like cracks in indentation fracture , 1975 .

[54]  K. Hirao,et al.  Comparison of fracture resistance as measured by the indentation fracture method and fracture toughness determined by the single-edge-precracked beam technique using silicon nitrides with different microstructures , 2007 .

[55]  Yanchun Zhou,et al.  Low-temperature synthesis/densification and properties of Si2N2O prepared with Li2O additive , 2007 .

[56]  D. Thompson,et al.  Low temperature densification of silicon nitride materials , 2007 .

[57]  F. Wakai,et al.  Effect of chemical composition of intergranular glass on superplastic compressive deformation of β-silicon nitride , 2006 .

[58]  N. Pradeilles,et al.  A modified SHS method for Si2N2O elaboration , 2006 .

[59]  V. Krstić,et al.  Effect of β-Si3N4 seeds on densification and fracture toughness of silicon nitride , 2006 .

[60]  V. Demir,et al.  Vacuum heat treatment of LiAlO2 densified silicon nitride ceramics , 2006 .

[61]  G. A. Swift.  Neutron diffraction study of in situ-reinforced silicon nitride during creep , 2004 .

[62]  K. Hirao,et al.  Microstructural characteristics in silicon nitride/tungsten composites by different in-situ processing , 2004 .

[63]  J. A. Pero-Sanz,et al.  Toughness of Si3N4 ceramics obtained by precipitating sintering aids as hydroxides , 2003 .

[64]  C. Liu.  Microstructural characterization of gas-pressure-sintered α-silicon nitride containing β-phase seeds , 2003 .

[65]  S. Kanzaki,et al.  Wear behaviour of α-Si3N4 ceramics reinforced by rod-like β-Si3N4 grains , 2003 .

[66]  P. Miranzo,et al.  Correlation between microstructure and toughness of hot pressed Si3N4 ceramics seeded with β-Si3N4 particles , 2003 .

[67]  M. Ferber,et al.  Mechanical reliability evaluation of silicon nitride ceramic components after exposure in industrial gas turbines , 2002 .

[68]  Liping Huang,et al.  Effects of α/β ratio in starting powder on microstructure and mechanical properties of silicon nitride ceramics , 2002 .

[69]  G. Fantozzi,et al.  Processing, microstructure, mechanical properties of Si3N4 obtained by slip casting and pressureless sintering , 2001 .

[70]  S. Bošković,et al.  Phase composition and fracture toughness of Si3N4–ZrO2 with CeO2 additions , 1999 .

[71]  F. Castro,et al.  The influence of amount and type of additives on α → β Si3N4 transformation , 1999 .

[72]  S. Kaza,et al.  Synthesis of α-Si3N4 from carbon coated silica by carbothermal reduction and nitridation , 1998 .

[73]  T. Lei,et al.  Microstructure, mechanical properties and thermal shock behaviour of Al2O3+ZrO3+SiCw composites , 1998 .

[74]  Masayoshi Ohashi,et al.  Factors affecting mechanical properties of silicon oxynitride ceramics , 1997 .

[75]  N. C. Biswas,et al.  Effect of thermal-shock and autoclave treatment on the microstructure of Al2O3ZrO2 composite , 1997 .

[76]  D. K. Kim,et al.  Effect of microwave heating on densification and α → β phase transformation of silicon nitride , 1997 .

[77]  L. Falk,et al.  Microstructure and Short‐Term Oxidation of Hot‐Pressed Si3N4/ZrO2(+Y2O3) Ceramics , 1992 .

[78]  L. Falk,et al.  Si3N4-ZrO2 composites with small Al2O3 and Y2O3 additions prepared by HIP , 1991, Journal of Materials Science.

[79]  J. Binner.  Advanced Ceramic Processing and Technology , 1990 .