Contact mechanics and lubrication analyses of ceramic-on-metal total hip replacements
暂无分享,去创建一个
[1] Duncan Dowson,et al. Elastohydrodynamic Lubrication of Elliptical Contacts for Materials of Low Elastic Modulus I—Fully Flooded Conjunction , 1978 .
[2] Duncan Dowson,et al. The Rheology of Synovial Fluid and Some Potential Synthetic Lubricants for Degenerate Synovial Joints , 1978 .
[3] D. Dowson,et al. Analysis of fluid film lubrication in artificial hip joint replacements with surfaces of high elastic modulus , 1997, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[4] D Dowson,et al. New joints for the Millennium: Wear control in total replacement hip joints , 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[5] G. Bergmann,et al. Hip contact forces and gait patterns from routine activities. , 2001, Journal of biomechanics.
[6] Z. Jin,et al. Elastohydrodynamic lubrication analysis of metal-on-metal hip prostheses under steady state entraining motion , 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[7] J Fisher,et al. A novel low wearing differential hardness, ceramic-on-metal hip joint prosthesis. , 2001, Journal of biomechanics.
[8] Z. Jin,et al. Analysis of contact mechanics in ceramic-on-ceramic hip joint replacements , 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[9] Roy D. Crowninshield,et al. The influences of lubricant and material on polymer/CoCr sliding friction , 2003 .
[10] D. Dowson,et al. Isoviscous elastohydrodynamic lubrication of circular point contacts with particular reference to metal-on-metal hip implants , 2003 .
[11] F. C. Wang,et al. Prediction of elastic deformation of acetabular cups and femoral heads for lubrication analysis of artificial hip joints , 2004 .
[12] P Roberts,et al. Transient elastohydrodynamic lubrication analysis of metal-on-metal hip implant under simulated walking conditions. , 2006, Journal of biomechanics.
[13] Theoretical studies of elastohydrodynamic lubrication of artificial hip joints , 2006 .
[14] J Fisher,et al. Biological effects of clinically relevant wear particles from metal-on-metal hip prostheses , 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[15] J. Fisher,et al. Ceramic-on-Metal Hip Arthroplasties : A Comparative In Vitro and In Vivo Study , 2007 .
[16] Leiming Gao,et al. Comparison of numerical methods for elastohydrodynamic lubrication analysis of metal-on-metal hip implants: Multi-grid verses Newton-Raphson , 2007 .
[17] Zhongmin Jin,et al. Friction of total hip replacements with different bearings and loading conditions. , 2007, Journal of biomedical materials research. Part B, Applied biomaterials.
[18] John Fisher,et al. THE 2007 OTTO AUFRANC AWARD: Ceramic-on-Metal Hip Arthroplasties: A Comparative In Vitro and In Vivo Study , 2007, Clinical orthopaedics and related research.
[19] J Fisher,et al. Understanding the differences between the wear of metal-on-metal and ceramic-on-metal total hip replacements , 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[20] Michael Carroll,et al. Wear performance of large-diameter differential-hardness hip bearings. , 2008, The Journal of arthroplasty.
[21] M M Morlock,et al. Friction moments of large metal-on-metal hip joint bearings and other modern designs. , 2008, Medical engineering & physics.
[22] Zhongmin Jin,et al. Transient Elastohydrodynamic Lubrication of Hip Joint Implants , 2008 .
[23] D. Dowson,et al. A study of the effect of model geometry and lubricant rheology upon the elastohydrodynamic lubrication performance of metal-on-metal hip joints , 2008 .
[24] Zhongmin Jin,et al. Effect of 3D physiological loading and motion on elastohydrodynamic lubrication of metal-on-metal total hip replacements. , 2009, Medical engineering & physics.
[25] I. Clarke,et al. Comparing ceramic-metal to metal-metal total hip replacements--a simulator study of metal wear and ion release in 32- and 38-mm bearings. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[26] J. Fisher,et al. Subsurface changes of a MoM hip implant below different contact zones. , 2009, Journal of the mechanical behavior of biomedical materials.
[27] Saverio Affatato,et al. Mixing and matching in ceramic-on-metal hip arthroplasty: an in-vitro hip simulator study. , 2009, Journal of biomechanics.
[29] A. Unsworth,et al. Tribological and surface analysis of 38mm alumina–as-cast Co–Cr–Mo total hip arthroplasties , 2009, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[30] J. Fisher,et al. Ceramic-on-metal Bearings in Total Hip Replacement Whole Blood Metal Ion Levels and Analysis of Retrieved Components Using a Radiological Measurement of Orientation Lewinnek Et Al , 2022 .
[31] C. Ranawat,et al. Metal on metal: is it worth the risk? , 2010, The Journal of arthroplasty.
[32] Ceramic-on-metal for total hip replacement: mixing and matching can lead to high wear. , 2010, Artificial organs.
[33] Z. Jin,et al. Transient Elastohydrodynamic Lubrication Analysis of a Novel Metal-On-Metal Hip Prosthesis with a Non-Spherical Femoral Bearing Surface , 2011, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[34] T. Joyce,et al. Adverse reaction to metal debris following hip resurfacing: the influence of component type, orientation and volumetric wear. , 2011, The Journal of bone and joint surgery. British volume.
[35] F. Haddad,et al. Metal-on-metal bearings: the evidence so far. , 2011, The Journal of bone and joint surgery. British volume.