Optimization of TiO2 Mesoporous Photoanodes Prepared by Inkjet Printing and Low-Temperature Plasma Processing

[1]  M. Šimek,et al.  Efficiency of Ozone Production in Coplanar Dielectric Barrier Discharge , 2019, Plasma Chemistry and Plasma Processing.

[2]  P. R. von Rohr,et al.  Characterization of Efficiency and Mechanisms of Cold Atmospheric Pressure Plasma Decontamination of Seeds for Sprout Production , 2018, Front. Microbiol..

[3]  H. Jung,et al.  Correlation between photoactivity of TiO2 and diffusion of Na+ ions from soda lime glass , 2018, Materials Letters.

[4]  Fumin Li,et al.  UV Treatment of Low-Temperature Processed SnO2 Electron Transport Layers for Planar Perovskite Solar Cells , 2018, Nanoscale Research Letters.

[5]  S. Kryštofová,et al.  Cold plasma treatment triggers antioxidative defense system and induces changes in hyphal surface and subcellular structures of Aspergillus flavus , 2018, Applied Microbiology and Biotechnology.

[6]  P. Souček,et al.  Atmospheric Dry Hydrogen Plasma Reduction of Inkjet-Printed Flexible Graphene Oxide Electrodes. , 2018, ChemSusChem.

[7]  D. Kováčik,et al.  Atmospheric pressure plasma assisted calcination by the preparation of TiO2 fibers in submicron scale , 2018 .

[8]  T. Buonassisi,et al.  Promises and challenges of perovskite solar cells , 2017, Science.

[9]  M. Veselý,et al.  Low-temperature (70 °C) ambient air plasma-fabrication of inkjet-printed mesoporous TiO2 flexible photoanodes , 2017 .

[10]  D. Pavliňák,et al.  Development of Al2O3 electrospun fibers prepared by conventional sintering method or plasma assisted surface calcination , 2017 .

[11]  S. Ramakrishna,et al.  Photoelectrode nanomaterials for photoelectrochemical water splitting , 2017 .

[12]  M. Grätzel.  The Rise of Highly Efficient and Stable Perovskite Solar Cells. , 2017, Accounts of chemical research.

[13]  Martin A. Green,et al.  Perovskite Solar Cells: The Birth of a New Era in Photovoltaics , 2017 .

[14]  Jiawei Gong,et al.  Review on dye-sensitized solar cells (DSSCs): Advanced techniques and research trends , 2017 .

[15]  M. Cernak,et al.  Atmospheric pressure plasma etching of silicon dioxide using diffuse coplanar surface barrier discharge generated in pure hydrogen , 2017 .

[16]  Michal Veselý,et al.  Fast and Low-Temperature (70 °C) Mineralization of Inkjet Printed Mesoporous TiO2 Photoanodes Using Ambient Air Plasma. , 2016, ACS applied materials & interfaces.

[17]  B. Ohtani,et al.  Surface Modification of TiO2 with Au Nanoclusters for Efficient Water Treatment and Hydrogen Generation under Visible Light , 2016 .

[18]  A. Kromka,et al.  Plasma treatment of detonation and HPHT nanodiamonds in diffuse coplanar surface barrier discharge in H2/N2 flow , 2016 .

[19]  M. Sillanpää,et al.  Enhanced photocatalytic activity through insertion of plasmonic nanostructures into porous TiO2/SiO2 hybrid composite films , 2016 .

[20]  A. Carlo,et al.  Research Update: Large-area deposition, coating, printing, and processing techniques for the upscaling of perovskite solar cell technology , 2016 .

[21]  Tao Wang,et al.  Synthesis of Mixed-Phase TiO2 Nanopowders Using Atmospheric Pressure Plasma Jet Driven by Dual-Frequency Power Sources , 2016, Plasma Chemistry and Plasma Processing.

[22]  Min-Cheol Kim,et al.  3D flexible Si based-composite (Si@Si3N4)/CNF electrode with enhanced cyclability and high rate capability for lithium-ion batteries , 2016 .

[23]  D. Kováčik,et al.  Atmospheric pressure plasma assisted calcination of composite submicron fibers , 2016 .

[24]  Merve Özkan,et al.  Dye-sensitized solar cells with inkjet-printed dyes , 2016 .

[25]  S. Mali,et al.  p-i-n/n-i-p type planar hybrid structure of highly efficient perovskite solar cells towards improved air stability: synthetic strategies and the role of p-type hole transport layer (HTL) and n-type electron transport layer (ETL) metal oxides. , 2016, Nanoscale.

[26]  W. Chou,et al.  Study of dye sensitized solar cell application of TiO2 films by atmospheric pressure plasma deposition method , 2016, 2016 International Conference on Electronics Packaging (ICEP).

[27]  G. Demopoulos,et al.  Aqueous, Screen-Printable Paste for Fabrication of Mesoporous Composite Anatase–Rutile TiO2 Nanoparticle Thin Films for (Photo)electrochemical Devices , 2016 .

[28]  Liyi Shi,et al.  Enhancement of power conversion efficiency of dye sensitized solar cells by modifying mesoporous TiO2 photoanode with Al-doped TiO2 layer , 2016 .

[29]  A. Jen,et al.  Current Challenges and Prospective Research for Upscaling Hybrid Perovskite Photovoltaics. , 2016, The journal of physical chemistry letters.

[30]  B. Rezek,et al.  Low‐Temperature hydrogenation of diamond nanoparticles using diffuse coplanar surface barrier discharge at atmospheric pressure , 2015 .

[31]  M. Veselý,et al.  Properties and Application Perspective of Hybrid Titania-Silica Patterns Fabricated by Inkjet Printing. , 2015, ACS applied materials & interfaces.

[32]  Jian-Zhang Chen,et al.  Atmospheric-pressure-plasma-jet processed nanoporous TiO2 photoanodes and Pt counter-electrodes for dye-sensitized solar cells , 2015 .

[33]  Aldo Di Carlo,et al.  Flexible Perovskite Photovoltaic Modules and Solar Cells Based on Atomic Layer Deposited Compact Layers and UV‐Irradiated TiO2 Scaffolds on Plastic Substrates , 2015 .

[34]  M. Beller,et al.  Solar Hydrogen Production by Plasmonic Au-TiO2 Catalysts: Impact of Synthesis Protocol and TiO2 Phase on Charge Transfer Efficiency and H2 Evolution Rates , 2015 .

[35]  Yongyao Xia,et al.  General strategy to synthesize uniform mesoporous TiO2/graphene/mesoporous TiO2 sandwich-like nanosheets for highly reversible lithium storage. , 2015, Nano letters.

[36]  Dario Narducci,et al.  Formation of stable Si–O–C submonolayers on hydrogen-terminated silicon(111) under low-temperature conditions , 2015, Beilstein journal of nanotechnology.

[37]  S. Parola,et al.  Mechanically stable and photocatalytically active TiO2/SiO2 hybrid films on flexible organic substrates , 2014 .

[38]  Taejin Hwang,et al.  Effect of titanium isopropoxide addition in low-temperature cured TiO2 photoanode for a flexible DSSC , 2014, Journal of Sol-Gel Science and Technology.

[39]  Marko Topič,et al.  Inkjet printing of sol–gel derived tungsten oxide inks , 2014 .

[40]  M. Cernak,et al.  Generation of Large‐Area Highly‐Nonequlibrium Plasma in Pure Hydrogen at Atmospheric Pressure , 2014 .

[41]  J. Demel,et al.  High photocatalytic activity of transparent films composed of ZnO nanosheets. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[42]  Chin Sheng Chua,et al.  Photocatalytic activity of tin-doped TiO2 film deposited via aerosol assisted chemical vapor deposition , 2013 .

[43]  M. Veselý,et al.  Fabrication, characterization and photocatalytic activity of TiO2 layers prepared by inkjet printing of stabilized nanocrystalline suspensions , 2013 .

[44]  Fuzhi Huang,et al.  Fabrication of flexible dye sensitized solar cells on plastic substrates , 2013 .

[45]  Jiawei Gong,et al.  Review on dye-sensitized solar cells (DSSCs): Fundamental concepts and novel materials , 2012 .

[46]  M. Kushner,et al.  Damage by radicals and photons during plasma cleaning of porous low-k SiOCH. I. Ar/O2 and He/H2 plasmas , 2012 .

[47]  M. Kushner,et al.  Damage by radicals and photons during plasma cleaning of porous low-k SiOCH. II. Water uptake and change in dielectric constant , 2012 .

[48]  Petr Kluson,et al.  Thin TiO2 films prepared by inkjet printing of the reverse micelles sol–gel composition , 2011 .

[49]  A. Carlo,et al.  Substrates for flexible electronics: A practical investigation on the electrical, film flexibility, optical, temperature, and solvent resistance properties , 2011 .

[50]  Andrea R. Gerson,et al.  Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn , 2010 .

[51]  T. Homola,et al.  ATMOSPHERIC PLASMA TREATMENT OF ITO THIN FILMS FOR RAPID MANUFACTURING OF PEROVSKITE SOLAR CELLS , 2020, NANOCON 2019 Conference Proeedings.

[52]  Martin A. Green,et al.  Manufacturing cost and market potential analysis of demonstrated roll-to-roll perovskite photovoltaic cell processes , 2018 .

[53]  Bao Zhang,et al.  N, La Co-Doped TiO2 for Use in Low-Temperature-Based Dye-Sensitized Solar Cells , 2016 .

[54]  D. Kováčik,et al.  Atmospheric pressure plasma assisted calcination of organometallic fibers , 2016 .