Automatic Recognition and Construction of Draft Angle for Injection Mold Design

In the injection molding process, plastic products are difficult to demold due to friction force between the cavity and products, thus, finished products might be deformed or damaged. Therefore, designers should add a draft angle to the geometric surface of products, which is parallel to the unloading direction, in order to help the products eject smoothly from the cavity. This study uses CAD software as the main architecture to develop the function of automatic draft angle recognition and construction. The study is divided into three stages. First, the geometric features of products are identified in the CAD model by induced algorithm, then the quilts to be added in the draft design are determined and classified. Finally, draft angles are created in different ways according to different surfaces. An algorithm suitable for automatic draft recognition and construction, as well as the constraints of automatic creation of draft angle, is proposed. The feature recognition algorithm of this study can automatically inspect 90% of the surfaces to be drafted, and the automatic creation of draft features can economize 80% of required mouse clicks, thus, effectively increasing draft angle design efficiency, and preventing errors in mold design and manufacturing.

[1]  Jorge Manuel Mercado-Colmenero,et al.  A new hybrid method for demoldability analysis of discrete geometries , 2016, Comput. Aided Des..

[2]  L.-S. Turng,et al.  A knowledge base system for the design and manufacture of injection-molded plastic products , 1998, 1998 IEEE Information Technology Conference, Information Environment for the Future (Cat. No.98EX228).

[3]  Wen-Ren Jong,et al.  A collaborative navigation system for concurrent mold design , 2009 .

[4]  Zoran Miljkovic,et al.  A review of automated feature recognition with rule-based pattern recognition , 2008, Comput. Ind..

[5]  Arvind Kumar Verma,et al.  A hint-based machining feature recognition system for 2.5D parts , 2008 .

[6]  Kristiaan Schreve.  Sufficient conditions for draft angles on general B-spline surfaces , 2009, Comput. Aided Des..

[7]  S. T. Tan,et al.  Adding draft angles on mechanical components containing constant radius blending surfaces , 2004, Comput. Aided Des..

[8]  Ranjit Singh,et al.  Automated identification of complex undercut features for side-core design for die-casting parts , 2014 .

[9]  W. M. Chan,et al.  A 3D CAD knowledge-based assisted injection mould design system , 2003 .

[10]  Andrew Y. C. Nee,et al.  Computer-Aided Injection Mold Design and Manufacture , 2004 .

[11]  Wen-Ren Jong,et al.  Web-based navigating system for conceptual mould design with knowledge management , 2011 .

[12]  Wen-Ren Jong,et al.  Feature-based integration of conceptual and detailed mould design , 2011 .

[13]  Andrew Y. C. Nee,et al.  The application of surface visibility and moldability to parting line generation , 2002, Comput. Aided Des..

[14]  Karl T. Ulrich,et al.  Product Design and Development , 1995 .

[15]  Souran Manoochehri,et al.  Optimum parting line design of molded and cast parts for manufacturability , 1997 .

[16]  Jiing-Yih Lai,et al.  Recognition of virtual loops on 3D CAD models based on the B-rep model , 2016, Engineering with Computers.

[17]  Andrew Y. C. Nee,et al.  Automatic Determination of 3-D Parting Lines and Surfaces in Plastic Injection Mould Design , 1998 .

[18]  Pei Zhou,et al.  Adding draft angle to B-spline and NURBS surfaces , 2012, Comput. Aided Des..

[19]  Aristides A. G. Requicha,et al.  CHAPTER 5 - Geometric computation for the recognition of spatially interacting machining features , 1994 .

[20]  Yoshimasa Tokuyama,et al.  An approximate method for generating draft on a free-form surface , 1999, The Visual Computer.

[21]  Aristides A. G. Requicha,et al.  Spatial Reasoning for the Automatic Recognition of Machinable Features in Solid Models , 1993, IEEE Trans. Pattern Anal. Mach. Intell..

[22]  Andrew Y. C. Nee,et al.  A hybrid method for recognizing interacting machining features , 2003 .