Signal processing and fabrication of a biomimetic tactile sensor array with thermal, force and microvibration modalities

We have developed a finger-shaped sensor array that provides simultaneous information about the contact forces, microvibrations and thermal fluxes induced by contact with external objects. In this paper, we describe a microprocessor-based signal conditioning and digitizing system for these sensing modalities and its embodiment on a flex-circuit that facilitates efficient assembly of the entire system via injection molding. Thermal energy from the embedded electronics is used to heat the finger above ambient temperature, similar to the biological finger. This enables the material properties of contacted objects to be inferred from thermal transients measured by a thermistor in the sensor array. Combining sensor modalities provides synergistic benefits. For example, the contact forces for exploratory movements can be calibrated so that thermal and microvibration data can be interpreted more definitively.

[1]  R. Andrew Russell.  A Thermal Sensor Array to Provide Tactile Feedback for Robots , 1985 .

[2]  D. Spray.  Cutaneous temperature receptors. , 1986, Annual review of physiology.

[3]  John M. Hollerbach,et al.  An integrated tactile and thermal sensor , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[4]  Gareth J. Monkman,et al.  Thermal tactile sensing , 1993, IEEE Trans. Robotics Autom..

[5]  Robert D. Howe,et al.  Tactile sensing and control of robotic manipulation , 1993, Adv. Robotics.

[6]  Mark Lee,et al.  Review Article Tactile sensing for mechatronics—a state of the art survey , 1999 .

[7]  Claudio Melchiorri,et al.  Tactile Sensing for Robotic Manipulation , 2001 .

[8]  Lynette A. Jones,et al.  The psychophysics of temperature perception and thermal-interface design , 2002, Proceedings 10th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems. HAPTICS 2002.

[9]  J. Yuji,et al.  Thermal-type tactile sensor for material discrimination and contact pressure sensing , 2002, Proceedings of the 41st SICE Annual Conference. SICE 2002..

[10]  Lynette A. Jones,et al.  Material discrimination and thermal perception , 2003, 11th Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 2003. HAPTICS 2003. Proceedings..

[11]  T. Someya,et al.  Conformable, flexible, large-area networks of pressure and thermal sensors with organic transistor active matrixes. , 2005, Proceedings of the National Academy of Sciences of the United States of America.

[12]  Sung-Hoon Kim,et al.  Flexible Multimodal Tactile Sensing System for Object Identification , 2006, 2006 5th IEEE Conference on Sensors.

[13]  J. Heo,et al.  Temperature Sensor Array for Tactile Sensation Using FBG Sensors , 2006, 2006 5th IEEE Conference on Sensors.

[14]  M. Dokmeci,et al.  A Three Dimensional Thermal Sensor Based on Single-Walled Carbon Nanotubes , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[15]  W. M. Bergmann Tiest,et al.  An Experimentally Verified Model of the Perceived 'Coldness' of Objects , 2007, WHC.

[16]  Kuang-Chao Fan,et al.  A wireless flexible temperature and tactile sensing array for robot applications , 2008, International Symposium on Precision Mechanical Measurements.

[17]  V. Maheshwari,et al.  Tactile devices to sense touch on a par with a human finger. , 2008, Angewandte Chemie.

[18]  Koh Hosoda,et al.  Robust material discrimination by a soft anthropomorphic finger with tactile and thermal sense , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[19]  G.E. Loeb,et al.  A robust micro-vibration sensor for biomimetic fingertips , 2008, 2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[20]  Veronica J. Santos,et al.  Biomimetic Tactile Sensor Array , 2008, Adv. Robotics.

[21]  M. Shimojo,et al.  A system for simultaneously measuring grasping posture and pressure distribution , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.