Comparison of accelerator-based with reactor-based nuclear waste transmutation schemes

Abstract An overview of the most significant studies in the last 35 years of partitioning and transmutation of commercial light water reactor spent fuel is given. Recent Accelerator-based Transmutation of Waste (ATW) systems are compared with liquid-fuel thermal reactor systems that accomplish the same objectives. If no long-lived fission products (e.g., 99 Tc and 129 I) are to be burned, under ideal circumstances the neutron balance in an ATW system becomes identical to that for a thermal reactor system. However, such a reactor would need extraordinarily rapid removal of internally-generated fission products to remain critical at equilibrium without enriched feed. The accelerator beam thus has two main purposes (1) the burning of long-lived fission products that could not be burned in a comparable reactor's margin (2) a relaxing of on-line chemical processing requirements without which a reactor-based system cannot maintain criticality. Fast systems would require a parallel, thermal ATW system for long-lived fission product transmutation. The actinide-burning part of a thermal ATW system is compared with the Advanced Liquid Metal Reactor (ALMR) using the well-known Pigford-Choi model. It is shown that the ATW produces superior inventory reduction factors for any near-term time scale.

[1]  Yoichiro Shimazu.  Nuclear Safety Analysis of a Molten Salt Breeder Reactor , 1978 .

[2]  C. A. Beard,et al.  Neutronics analysis for an accelerator-based nuclear waste transmuter , 1993 .

[3]  P. Aldhous.  Rubbia floats a plan for accelerator power plants. , 1993, Science.

[4]  J. Fraser.  High Power Accelerators for Spallation Breeders of Fissile Material , 1977, IEEE Transactions on Nuclear Science.

[5]  G. J. Russell,et al.  LAHET Code System/CINDER`90 validation calculations and comparison with experimental data , 1994 .

[6]  M. L. Thompson.  The modular ALMR (PRISM) fuel cycle , 1990 .

[7]  R. Jameson,et al.  Accelerator technology for Los Alamos nuclear-waste-transmutation and energy-production concepts , 1991 .

[8]  S. B. Ludwig,et al.  A reexamination of the incentives for actinide burning , 1990 .

[9]  H. G. Hughes,et al.  Nuclear energy generation and waste transmutation using an accelerator-driven intense thermal neutron source , 1992 .

[10]  M. Salvatores,et al.  A global physics approach to transmutation of radioactive nuclei , 1994 .

[11]  J. R. Engel,et al.  Conceptual design characteristics of a denatured molten-salt reactor with once-through fueling , 1980 .

[12]  S. Lovesey,et al.  Advanced spallation neutron sources for condensed matter research , 1984 .

[13]  R. C. Robertson,et al.  CONCEPTUAL DESIGN STUDY OF A SINGLE-FLUID MOLTEN-SALT BREEDER REACTOR. , 1971 .

[14]  Ralph L. Keeney,et al.  Managing Nuclear Waste from Power Plants , 1994 .

[15]  C. A. Beard,et al.  Parametric systems studies of the aqueous-based (slurry) blanket concept for accelerator transmutation of waste , 1995 .

[16]  M. Steinberg,et al.  The Accelerator-Breeder, an Application of High-Energy Accelerators to Solving Our Energy Problems , 1977, IEEE Transactions on Nuclear Science.

[17]  H. C. Claiborne.  Effect of actinide removal on the long-term hazard of high-level waste , 1975 .

[18]  D. C. Wade.  Management of transuranics using the Integral Fast Reactor (IFR) fuel cycle , 1994 .

[19]  T. Cotton,et al.  Impacts of new developments in partitioning and transmutation on the disposal of high-level nuclear waste in a mined geologic repository , 1992 .

[20]  J. A. Lane,et al.  Fluid fuel reactors , 1958 .

[21]  W. Farr,et al.  Power Production and Actinide Elimination by Fast Reactor Recycle , 1979 .

[22]  A. Croff.  ORIGEN2: A Versatile Computer Code for Calculating the Nuclide Compositions and Characteristics of Nuclear Materials , 1983 .

[23]  Manson Benedict,et al.  Nuclear Chemical Engineering , 1981 .

[24]  Hans Frauenfelder,et al.  Report to the American Physical Society by the study group on nuclear fuel cycles and waste management , 1978 .

[25]  R. Chrien,et al.  Neutron sources for basic physics and applications , 1983 .

[26]  J. F. Briesmeister.  MCNP-A General Monte Carlo N-Particle Transport Code , 1993 .

[27]  W. W. Schulz,et al.  The Truex Process and the Management of Liquid Tru Uwaste , 1988 .