Ramberg–Osgood Stress–Strain Analysis of the Effects of Aging Treatment and Welding on IN600 with a Three-Stage Strain Hardening Behavior

[1]  C. Rubio-González,et al.  Microstructural characterization and mechanical response of Inconel 600 welded joint , 2019, Materials Characterization.

[2]  M. Jafari,et al.  Effect of Solidification Mode on Microstructure and Mechanical Properties of AISI420 Steel to SAF2507 Steel Dissimilar Joint Produced by Transient Liquid Phase , 2019, Metals and Materials International.

[3]  Longzhi Zhao,et al.  Dissimilar Metal Joining of 304 Stainless Steel to SMA490BW Steel Using the Filler Metal Powders with a High-Entropy Design , 2019, Metals and Materials International.

[4]  R. Ambriz,et al.  Fatigue and crack growth behavior of Inconel 718–AL6XN dissimilar welds , 2019, Materials Science and Engineering: A.

[5]  D. Kujawski,et al.  An Estimation of Ramberg-Osgood Constants for Materials with and without Luder’s Strain Using Yield and Ultimate Strengths , 2019, Procedia Structural Integrity.

[6]  D. Lévêque,et al.  High temperature mechanical behavior of tube stackings – Part I: Microstructural and mechanical characterization of Inconel® 600 constitutive material , 2016 .

[7]  Kyoung Joon Choi,et al.  Microstructural evolution and stress-corrosion-cracking behavior of thermally aged Ni-Cr-Fe alloy , 2016 .

[8]  Jinyang Zheng,et al.  Description of full-range strain hardening behavior of steels , 2016, SpringerPlus.

[9]  M. Kamaya.  Ramberg–Osgood type stress–strain curve estimation using yield and ultimate strengths for failure assessments , 2016 .

[10]  H. Zhang,et al.  Effect of precipitated carbides on the fretting wear behavior of Inconel 600 alloy , 2014 .

[11]  Jingqing Zhang,et al.  Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni–Cr–W based superalloy , 2012 .

[12]  Adrian P. Mouritz,et al.  Introduction to Aerospace Materials , 2012 .

[13]  C. Seok,et al.  Plastic η factor considering strength mismatch and crack location in narrow gap weldments , 2012 .

[14]  M. D. Mathew,et al.  Tensile stress–strain and work hardening behaviour of P9 steel for wrapper application in sodium cooled fast reactors , 2012 .

[15]  D. L. Chen,et al.  Tensile Properties and Work Hardening Behavior of Laser-Welded Dual-Phase Steel Joints , 2012, Journal of Materials Engineering and Performance.

[16]  Rudi Denys,et al.  A generic stress–strain model for metallic materials with two-stage strain hardening behaviour , 2011 .

[17]  Rui Hu,et al.  Effect of temperature on tensile behavior of Ni–Cr–W based superalloy , 2011 .

[18]  R. Faulkner,et al.  Grain boundary chromium depletion in austenitic alloys , 2010 .

[19]  Tomasz Wierzbicki,et al.  Characterization of material and fracture of AA6061 butt weld , 2009 .

[20]  A. Solonin,et al.  Study of work hardening of quenched and naturally aged Al–Mg and Al–Cu alloys , 2009 .

[21]  Hiroyuki Kokawa,et al.  Effect of microstructure on properties of friction stir welded Inconel Alloy 600 , 2008 .

[22]  G. Sastry,et al.  Work-Hardening Behavior of the Ni-Fe Based Superalloy IN718 , 2008 .

[23]  Sir Robert Honeycombe,et al.  The Tempering of Martensite , 2006 .

[24]  G. A. Malygin.  Analysis of strain hardening of crystals under large plastic strains , 2001 .

[25]  D. Gan,et al.  Effects of grain boundary carbides on the mechanical properties of Inconel 600 , 2001 .

[26]  J. Chakravartty,et al.  Characterization of Fatigue and Fracture Behaviour and Improvement of Toughness of End Fitting Material of Pressurized Heavy Water Reactors , 1997 .

[27]  K. Stiller,et al.  Structure, chemistry, and stress corrosion cracking of grain boundaries in alloys 600 and 690 , 1996 .

[28]  Stephen M. Bruemmer,et al.  Microstructure and microdeformation effects on IGSCC of Alloy 600 steam generator tubing , 1988 .

[29]  A. Horsewell.  Creep inhibition at grain boundaries in a stainless steel , 1978 .

[30]  A. Bowen,et al.  Limitations of the Hollomon strain-hardening equation , 1974 .

[31]  D. C. Ludwigson,et al.  Modified stress-strain relation for FCC metals and alloys , 1971 .

[32]  W. Ramberg,et al.  Description of Stress-Strain Curves by Three Parameters , 1943 .