A review of ultrashort pulsed laser ablation of materials

The use of ultrashort pulsed lasers in materials processing is an emerging technology. These lasers have the capability to ablate materials precisely with little or no collateral damage, even with materials that are impervious to laser energy from conventional pulsed lasers. The extreme intensities and short timescale at which ultrashort pulsed lasers operate differentiate them from other lasers. The means of ultrashort pulsed laser generation is discussed; included are a survey of pulse compressor techniques with solid state lasers and a brief discussion of excimer-dye lasers. This is followed by a discussion of specific examples of ultrashort pulsed machining of specific materials, along with mechanistic details. Optical breakdown mechanisms, including electron avalanche ionization and multiphoton absorption are discussed. It is shown that as pulse width increases and intensity decreases, laser damage becomes a stochastic process in which the ultrashort pulsed, high intensity light causes optical breakd...

[1]  C. Kalpouzos,et al.  Femtosecond transient reflection from polymer surfaces during femtosecond UV photoablation , 1995 .

[2]  M. Stuke,et al.  Sub-picosecond UV laser ablation of metals , 1995 .

[3]  M. Stuke,et al.  Ablation of polytetrafluoroethylene (Teflon) with femtosecond UV excimer laser pulses , 1989 .

[4]  R. Szipöcs,et al.  Sub-10-fs mirror-dispersion-controlled Ti:sapphire laser. , 1995, Optics letters.

[5]  Perry,et al.  Laser-induced damage in dielectrics with nanosecond to subpicosecond pulses. , 1995, Physical review letters.

[6]  P. Simon,et al.  Nanosecond and femtosecond excimer laser ablation of fused silica , 1992 .

[7]  P. P. Pronko,et al.  Laser Induced Avalanche Ionization and Electron-Lattice Heating of Silicon with Intense Near IR Femtosecond Pulses , 1995 .

[8]  J. P. Callan,et al.  Phase Transitions Induced By Femtosecond Pulses , 1995 .

[9]  A. Luft,et al.  A study of thermal and mechanical effects on materials induced by pulsed laser drilling , 1996 .

[10]  F. Schäfer,et al.  Subpicosecond, widely tunable distributed feedback dye laser , 1988 .

[11]  K R Wilson,et al.  Generation of 18-fs, multiterawatt pulses by regenerative pulse shaping and chirped-pulse amplification. , 1996, Optics letters.

[12]  G. Marowsky,et al.  Ablation of Si and Ge Using UV Femtosecond Laser Pulses , 1995 .

[13]  B. Lemoff,et al.  Generation of high-peak-power 20-fs pulses from a regeneratively initiated, self-mode-locked Ti:sapphire laser. , 1992, Optics letters.

[14]  C. Barty.  Ten-femtosecond amplifier creates multiterawatt pulses , 1996 .

[15]  Martin Richardson.  New opportunities with intense ultra-short-pulse lasers , 1991, Photonics West - Lasers and Applications in Science and Engineering.

[16]  Gerard Mourou,et al.  Compression of amplified chirped optical pulses , 1985 .

[17]  A. Tünnermann,et al.  Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[18]  Gerard Mourou,et al.  Machining of sub-micron holes using a femtosecond laser at 800 nm , 1995 .

[19]  Gerard Mourou,et al.  Laser‐induced breakdown by impact ionization in SiO2 with pulse widths from 7 ns to 150 fs , 1994 .

[20]  P. P. Pronko,et al.  Thermophysical effects in laser processing of materials with picosecond and femtosecond pulses , 1995 .

[21]  B. Wolff-Rottke,et al.  Nanosecond and femtosecond excimer-laser ablation of oxide ceramics , 1995 .

[22]  Vladislav V. Yakovlev,et al.  Methods for generation of 10-Hz 100-TW optical pulses , 1995, Photonics West.