Performance evolution of NiO/yttria-stabilized zirconia anodes fabricated at different compaction pressures
暂无分享,去创建一个
Z. Lü | Kongfa Chen | Xiqiang Huang | W. Su | N. Ai | Xiangjun Chen
[1] Xiaobo Du,et al. Effect of composite pore-former on the fabrication and performance of anode-supported membranes for SOFCs , 2008 .
[2] Piotr Jasinski,et al. Fabrication of solid oxide fuel cell supported on specially performed ferrite-based perovskite cathode , 2008 .
[3] Z. Lü,et al. Characteristics of NiO-YSZ anode based on NiO particles synthesized by the precipitation method , 2008 .
[4] X. Ye,et al. Performance of Ni/ScSZ cermet anode modified by coating with Gd0.2Ce0.8O2 for a SOFC , 2007 .
[5] J. Ni,et al. Investigations in the compaction and sintering of large ceramic parts , 2007 .
[6] G. Meng,et al. Thin yttria-stabilized zirconia electrolyte and transition layers fabricated by particle suspension spray , 2007 .
[7] Yaohui Zhang,et al. Fabrication and performance of anode-supported YSZ films by slurry spin coating , 2007 .
[8] Yanwei Liu,et al. Preparation of Sm0.2Ce0.8O1.9 membranes on porous substrates by a slurry spin coating method and its application in IT-SOFC , 2006 .
[9] Qingshan Zhu,et al. Gel-cast anode substrates for solid oxide fuel cells , 2006 .
[10] S. Barnett,et al. A study of screen printed yttria-stabilized zirconia layers for solid oxide fuel cells , 2005 .
[11] R. Glass,et al. Effects of the Use of Pore Formers on Performance of an Anode supported Solid Oxide Fuel Cell , 2005 .
[12] S. Chan,et al. Performance evaluation of anode-supported solid oxide fuel cells with thin film YSZ electrolyte , 2004 .
[13] S. Jiang,et al. A review of anode materials development in solid oxide fuel cells , 2004 .
[14] J.-H. Lee,et al. Tuning of the microstructure and electrical properties of SOFC anode via compaction pressure control during forming , 2004 .
[15] Seetharama C. Deevi,et al. A review on the status of anode materials for solid oxide fuel cells , 2003 .
[16] Masayuki Dokiya,et al. Supported Zr(Sc)O2 SOFCs for reduced temperature prepared by slurry coating and co-firing , 2002 .
[17] Wuxia Li,et al. Fabrication of nano Y-TZP materials by superhigh pressure compaction , 2001 .
[18] S. Singhal. Advances in solid oxide fuel cell technology , 2000 .
[19] D. Perednis,et al. Fabrication of thin electrolytes for second-generation solid oxide fuel cells , 2000 .
[20] Toru Inagaki,et al. Ni-SDC cermet anode for medium-temperature solid oxide fuel cell with lanthanum gallate electrolyte , 1999 .
[21] D. Stöver,et al. Properties of Ni/YSZ porous cermets for SOFC anode substrates prepared by tape casting and coat-mix® process , 1999 .
[22] Frederick F. Lange,et al. Sinterability of Agglomerated Powders , 1984 .
[23] Joon-Hyung Lee,et al. Effect of forming pressure on densification behavior of nanocrystalline ITO powder , 2007 .
[24] Raphaël Ihringer,et al. Anode supported solid oxide fuel cells with screen-printed cathodes , 2001 .