Identification of harmonic load acting on an elastically supported thin plate linked with attachments

Plate-like structures in real mechanical system is always simplified and modeled as an elastically restrained thin plate loaded with stiffness or mass. The dynamic model of the plate distinguished with previous classic model is complex vibrational characteristics and merely proposed by numerical method. Accordingly, identification of harmonic load acting on this plate becomes difficult for hardly obtaining inverse equations or matrix from its response functions directly. To solve this problem, dynamic model of the plate is established by numeric method and combined with particle swarm optimization (PSO) method to reconstruct harmonic load by minimizing total error between vibration responses in identification and test. Then, it is used to deal with acceleration responses tested in an elastically supported plate derived by a harmonic load. Parameters of the harmonic load are identified and found to agree with those of real source by their comparison. Thus, it is concluded that harmonic load driving on the plate linked with elastic boundary and attachment can be identified accurately by proposed numeric model of this paper. Furthermore, acceleration distribution of the plate at modal frequencies and responses at different test point, which are acquired from identification and test, are demonstrated and discussed. It is revealed that the numeric model proposed in this paper identifies parameters of harmonic load mainly through tendency of vibration distribution on the plate, and the accuracies of its reconstruction results at some locations are limited.

[1]  Yi Liu,et al.  An improved method for the reconstruction of a distributed force acting on a vibrating structure , 2006 .

[2]  Ammar W. Mohemmed,et al.  Solving shortest path problem using particle swarm optimization , 2008, Appl. Soft Comput..

[3]  Peter Avitabile,et al.  Identifying dynamic loadings from measured responses , 1999 .

[4]  Duncan Cramer,et al.  The Sage dictionary of statistics : a practical resource for students in the social sciences , 2004 .

[5]  W. L. Li,et al.  A FOURIER SERIES METHOD FOR THE VIBRATIONS OF ELASTICALLY RESTRAINED PLATES ARBITRARILY LOADED WITH SPRINGS AND MASSES , 2002 .

[6]  Roberto Schirru,et al.  Identification of nuclear power plant transients using the Particle Swarm Optimization algorithm , 2008 .

[7]  D. Cramer.  The Sage dictionary of statistics , 2004 .

[8]  Bor-Tsuen Wang,et al.  Prediction of Impact and Harmonic Forces Acting on Arbitrary Structures: Theoretical Formulation , 2002 .

[9]  Pavel M. Trivailo,et al.  The inverse determination of aerodynamic loading from structural response data using neural networks , 2006 .

[10]  Kamran Behdinan,et al.  Particle swarm approach for structural design optimization , 2007 .

[11]  Yasushi Mitsui,et al.  APPLICATION OF ARTIFICIAL NEURAL NETWORKS TO LOAD IDENTIFICATION , 1998 .

[12]  Xingxing Jiang,et al.  Reconstruction of distributed dynamic loads on an Euler beam via mode-selection and consistent spatial expression , 2008 .

[13]  Enboa Wu,et al.  Impact on composite laminated plates: An inverse method , 1994 .

[14]  E. Jacquelin,et al.  Force reconstruction: analysis and regularization of a deconvolution problem , 2003 .

[15]  Russell C. Eberhart,et al.  A new optimizer using particle swarm theory , 1995, MHS'95. Proceedings of the Sixth International Symposium on Micro Machine and Human Science.

[16]  L. Perotin,et al.  An Inverse Method for the Identification of a Distributed Random Excitation Acting on a Vibrating Structure: Part 1 — Theory , 1997, 4th International Symposium on Fluid-Structure Interactions, Aeroelasticity, Flow-Induced Vibration and Noise: Volume I.

[17]  A. L. Wicks,et al.  Reconstruction of turbine blade forces from response data , 2001 .

[18]  D. Kiranmai,et al.  Determination of kinetic parameters in fixed-film bio-reactors: an inverse problem approach , 2005 .

[19]  Cheng-Hung Huang,et al.  An inverse vibration problem in estimating the spatial and temporal-dependent external forces for cutting tools , 2009 .

[20]  J. A. Fabunmi,et al.  Effects of structural modes on vibratory force determination by the pseudoinverse technique , 1986 .

[21]  James F. Doyle,et al.  A genetic algorithm for determining the location of structural impacts , 1994 .

[22]  S. Karlsson,et al.  IDENTIFICATION OF EXTERNAL STRUCTURAL LOADS FROM MEASURED HARMONIC RESPONSES , 1996 .

[23]  H. Benaroya,et al.  Review of force reconstruction techniques , 2014 .

[24]  Cheng-Hung Huang,et al.  A NON-LINEAR INVERSE VIBRATION PROBLEM OF ESTIMATING THE EXTERNAL FORCES FOR A SYSTEM WITH DISPLACEMENT-DEPENDENT PARAMETERS , 2001 .

[25]  Cheng-Hung Huang.  A nonlinear inverse problem in estimating simultaneously the external forces for a vibration system with displacement-dependent parameters , 2005, J. Frankl. Inst..