Independent Verification of the Sentinel-1A System Calibration

In the frame of the COPERNICUS program, the main objective of the Sentinel-1 mission is to ensure the continuity of C-band SAR data for global earth monitoring. Sentinel-1A is the first of two C-band satellites launched in April 2014. In addition to the commissioning of Sentinel-1A executed by the European Space Agency (ESA), an independent verification of the system calibration has been performed by DLR under an ESA contract. For this purpose, the complete calibration chain was developed and established, starting with a calibration concept, a detailed in-orbit calibration plan and the software tools for analyzing and evaluating all the measurements up to the calibration targets serving as accurate reference. Based on an efficient calibration strategy, this paper describes the different activities performed by DLR and presents the results obtained during the commissioning phase (CP) of Sentinel-1A.

[1]  Innovative and efficient strategy of calibrating Sentinel-1 , 2009, 2009 IEEE International Geoscience and Remote Sensing Symposium.

[2]  Marco Schwerdt,et al.  In-Orbit Calibration Plan of Sentinel-1 , 2010 .

[3]  Dirk Geudtner,et al.  Overview of the GMES Sentinel-1 mission , 2012 .

[4]  Marco Schwerdt,et al.  An Efficient Method for Performance Monitoring of Active Phased Array Antennas , 2009, IEEE Transactions on Geoscience and Remote Sensing.

[5]  Dirk Geudtner,et al.  Sentinel-1 mission capabilities and SAR system calibration , 2013, 2013 IEEE Radar Conference (RadarCon13).

[6]  Lee-Anne McKinnell,et al.  The international reference ionosphere today and in the future , 2011 .

[7]  Marco Schwerdt,et al.  First TerraSAR-X TOPS Mode Antenna Pattern Measurements Using Ground Receivers , 2013 .

[8]  Marco Schwerdt,et al.  The DLR SAR calibration center , 2015, 2015 IEEE 5th Asia-Pacific Conference on Synthetic Aperture Radar (APSAR).

[9]  Marco Schwerdt,et al.  The Three-Transponder Method: A Novel Method for Accurate Transponder RCS Calibration , 2014 .

[10]  Achim Roth,et al.  Geometric Error Budget Analysis for TerraSAR-X , 2004 .

[11]  Marco Schwerdt,et al.  First Results of the Sentinel-1A In-Orbit Antenna Characterization Performed by DLR , 2014 .

[12]  David Small,et al.  Estimation of Atmospheric Path Delays in TerraSAR-X Data using Models vs. Measurements , 2008, Sensors.

[13]  Marco Schwerdt,et al.  Accurate Antenna Pattern Modeling for Phased Array Antennas in SAR Applications—Demonstration on TerraSAR-X , 2009 .

[14]  Marco Schwerdt,et al.  Comparison of Absolute Radiometric Transponder Calibration Strategies , 2014 .

[15]  Marco Schwerdt,et al.  Absolute Radiometric Calibration of C-Band Transponders with Proven Plausibility , 2014 .

[16]  Marco Schwerdt,et al.  Final TerraSAR-X Calibration Results Based on Novel Efficient Methods , 2010, IEEE Transactions on Geoscience and Remote Sensing.

[17]  Marco Schwerdt,et al.  Development of the highly accurate DLR Kalibri Transponder , 2014 .

[18]  Marco Schwerdt,et al.  A First Assessment of an Efficient Strategy of Sentinel-1 Calibration , 2008 .

[19]  Marco Schwerdt,et al.  Hierarchical Bayesian Data Analysis in Radiometric SAR System Calibration: A Case Study on Transponder Calibration with RADARSAT-2 Data , 2013, Remote. Sens..

[20]  Marco Schwerdt,et al.  Active Antenna Module Characterisation by Pseudo-Noise Gating , 2002 .

[21]  Marco Schwerdt,et al.  Independent Verification of the Sentinel-1A System Calibration , 2016, IEEE J. Sel. Top. Appl. Earth Obs. Remote. Sens..

[22]  Núria Tous Ramon.  Verification of the Complex Internal Calibration Approach Operated for the Sentinel-1A C-SAR Instrument , 2014 .

[23]  Marco Schwerdt,et al.  TerraSAR-X Antenna Calibration and Monitoring Based on a Precise Antenna Model , 2010, IEEE Transactions on Geoscience and Remote Sensing.