Applicability of Solid-State Transformers in Today’s and Future Distribution Grids

Solid-state transformers (SSTs) are power electronic converters that provide isolation between a medium-voltage and a low-voltage (LV) system using medium-frequency transformers. The power electronic stages enable full-range control of the terminal voltages and currents and hence of the active and reactive power flows. Thus, SSTs are envisioned as key components of a smart grid. Various SST concepts have been proposed and analyzed in literature concerning technical aspects. However, several issues could potentially limit the applicability of SSTs in distribution grids. Therefore, this paper discusses four essential challenges in detail. It is found that SSTs are less efficient than low-frequency transformers (LFTs), yet their prospective prices are significantly higher. Furthermore, SSTs are not compatible with the protection schemes employed in today’s LV grids, i.e., they are not drop-in replacements for LFTs. The limited voltage control range typically required in distribution grids can be provided by competing solutions, which do not involve power electronics (e.g., LFTs with tap changers), or by hybrid transformers, where the comparably inefficient power electronic stage processes only a fraction of the total power. Finally, potential application scenarios of SSTs (ac-dc, dc-dc, weight/space limited applications) are discussed. All considerations are distilled into an applicability flowchart for SST technology.

[1]  Volker Staudt,et al.  Design of an electronic power transformer , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[2]  Johann W. Kolar,et al.  Protection of MV Converters in the Grid: The Case of MV/LV Solid-State Transformers , 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[3]  Rolando Burgos,et al.  Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems , 2013, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[4]  Johann W. Kolar,et al.  Comprehensive Conceptualization, Design, and Experimental Verification of a Weight-Optimized All-SiC 2 kV/700 V DAB for an Airborne Wind Turbine , 2016, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[5]  L. Heinemann,et al.  The universal power electronics based distribution transformer, an unified approach , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[6]  Liangzhong Yao,et al.  Active Control of DC Fault Currents in DC Solid-State Transformers During Ride-Through Operation of Multi-Terminal HVDC Systems , 2016, IEEE Transactions on Energy Conversion.

[7]  A Q Huang,et al.  The Future Renewable Electric Energy Delivery and Management (FREEDM) System: The Energy Internet , 2011, Proceedings of the IEEE.

[8]  Nicola Schulz,et al.  Potential of solid-state transformers for grid optimization in existing low-voltage grid environments , 2017 .

[9]  Dan Wang,et al.  A 10-kV/400-V 500-kVA Electronic Power Transformer , 2016, IEEE Transactions on Industrial Electronics.

[10]  M. Steiner,et al.  Medium frequency topology in railway applications , 2007, 2007 European Conference on Power Electronics and Applications.

[11]  J. Biela,et al.  Evaluation of topologies and optimal design of a hybrid distribution transformer , 2015, 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe).

[12]  Juan Miguel González-Lopez,et al.  A review of AC choppers , 2010, 2010 20th International Conference on Electronics Communications and Computers (CONIELECOMP).

[13]  Johann W. Kolar,et al.  Volume/weight/cost comparison of a 1MVA 10 kV/400 V solid-state against a conventional low-frequency distribution transformer , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[14]  David E. Grider,et al.  10 kV, 120 A SiC half H-bridge power MOSFET modules suitable for high frequency, medium voltage applications , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[15]  P. Bauer,et al.  Electronic tap changer for 500 kVA/10 kV distribution transformers: design, experimental results and impact in distribution networks , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[16]  Johann W. Kolar,et al.  Solid-State Transformers: On the Origins and Evolution of Key Concepts , 2016, IEEE Industrial Electronics Magazine.

[17]  Yugo Kashihara,et al.  An isolated medium-voltage AC/DC power supply based on multil-cell converter topology , 2017, 2017 IEEE Applied Power Electronics Conference and Exposition (APEC).

[18]  Johann W. Kolar,et al.  Design and Experimental Analysis of a Medium-Frequency Transformer for Solid-State Transformer Applications , 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[19]  Johann W. Kolar,et al.  Comparative evaluation of isolated front end and isolated back end multi-cell SSTs , 2016, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia).

[20]  Jarrod D. Luze.  Distribution transformer size optimization by forecasting customer electricity load , 2009, 2009 IEEE Rural Electric Power Conference.

[21]  S. Rajagopalan,et al.  Hybrid distribution transformer: Concept development and field demonstration , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[22]  Kevin McCoy,et al.  Next Generation Integrated Power System: NGIPS Technology Development Roadmap , 2007 .

[23]  Johann W. Kolar,et al.  Optimum Number of Cascaded Cells for High-Power Medium-Voltage AC–DC Converters , 2017, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[24]  Michael Steiner,et al.  Antriebsschaltung für ein Schienenfahrzeug , 1998 .

[25]  J. Biela,et al.  Protection of hybrid transformers in the distribution grid , 2016, 2016 18th European Conference on Power Electronics and Applications (EPE'16 ECCE Europe).

[26]  Subhashish Bhattacharya,et al.  Protection of a transformerless intelligent power substation , 2013, 2013 4th IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG).

[27]  Juan A. Martinez-Velasco,et al.  A Solid State Transformer model for power flow calculations , 2017 .

[28]  Lingfeng Wang,et al.  Autonomous Energy Management Strategy for Solid-State Transformer to Integrate PV-Assisted EV Charging Station Participating in Ancillary Service , 2017, IEEE Transactions on Industrial Informatics.

[29]  R. Meenal,et al.  AC-AC converter with high frequency link to obtain stable sinusoidal voltage with low distortions , 2015, 2015 Global Conference on Communication Technologies (GCCT).

[30]  William McMurray,et al.  The Thyristor Electronic Transformer: a Power Converter Using a High-Frequency Link , 1971 .

[31]  Drazen Dujic,et al.  MVDC marine electrical distribution: Are we ready? , 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society.

[32]  Jih-Sheng Lai,et al.  Multilevel intelligent universal transformer for medium voltage applications , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[33]  Giri Venkataramanan,et al.  Power electronic transformers for utility applications , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[34]  Alex Q. Huang,et al.  On Integration of Solid-State Transformer With Zonal DC Microgrid , 2012, IEEE Transactions on Smart Grid.

[35]  Francesco Agostini,et al.  Modular PET, two-phase air-cooled converter cell design and performance evaluation with 1.7kV IGBTs for MV applications , 2016, 2016 IEEE Applied Power Electronics Conference and Exposition (APEC).

[36]  R. Ayyanar,et al.  A DC–DC Multiport-Converter-Based Solid-State Transformer Integrating Distributed Generation and Storage , 2013, IEEE Transactions on Power Electronics.

[37]  S. D. Sudhoff,et al.  A Power Electronic-Based Distribution Transformer , 2002, IEEE Power Engineering Review.

[38]  P. Steimer,et al.  On reliability of medium voltage multilevel converters , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[39]  G. T. Heydt,et al.  Smart distribution system design: Automatic reconfiguration for improved reliability , 2010, IEEE PES General Meeting.

[40]  D. Bosich,et al.  Toward the future: The MVDC large ship research program , 2015, 2015 AEIT International Annual Conference (AEIT).

[41]  Bulent Sarlioglu,et al.  More Electric Aircraft: Review, Challenges, and Opportunities for Commercial Transport Aircraft , 2015, IEEE Transactions on Transportation Electrification.

[42]  Prasad Enjeti,et al.  Analysis and design of electronic transformers for electric power distribution system , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[43]  Hui Li,et al.  A Novel Hierarchical Section Protection Based on the Solid State Transformer for the Future Renewable Electric Energy Delivery and Management (FREEDM) System , 2013, IEEE Transactions on Smart Grid.

[44]  Laszlo Gyugyi,et al.  Reactive Power Generation and Control by Thyristor Circuits , 1976, IEEE Transactions on Industry Applications.

[45]  Drazen Dujic,et al.  Power Electronic Traction Transformer—Medium Voltage Prototype , 2014, IEEE Transactions on Industrial Electronics.

[46]  Jun Wang,et al.  Smart grid technologies , 2009, IEEE Industrial Electronics Magazine.