Experimental investigation of the innovated indirect-cooling system for Li-ion battery packs under fast charging and discharging

[1]  R. Aravind Sekhar,et al.  Distance to empty soft sensor for ford escape electric vehicle , 2022, Results in Control and Optimization.

[2]  M. Fowler,et al.  Combined influence of concentration-dependent properties, local deformation and boundary confinement on the migration of Li-ions in low-expansion electrode particle during lithiation , 2022, Journal of Energy Storage.

[3]  Münür Sacit Herdem,et al.  Numerical Simulation of Cooling Plate Using K-Epsilon Turbulence Model to Cool down Large-Sized Graphite/LiFePO4 Battery at High C-Rates , 2022, World Electric Vehicle Journal.

[4]  M. Fowler,et al.  A novel heat dissipation structure based on flat heat pipe for battery thermal management system , 2022, International Journal of Energy Research.

[5]  E. Houshfar,et al.  Experimental study of thermal management system for cylindrical Li-ion battery pack based on nanofluid cooling and copper sheath , 2022, International Journal of Thermal Sciences.

[6]  Alireza Mahdavi Nejad,et al.  Novel hybrid thermal management for Li-ion batteries with nanofluid cooling in the presence of alternating magnetic field: An experimental study , 2021, Case Studies in Thermal Engineering.

[7]  M. Najafi,et al.  Numerical study of novel liquid-cooled thermal management system for cylindrical Li-ion battery packs under high discharge rate based on AgO nanofluid and copper sheath , 2021 .

[8]  Wang Wenwei,et al.  A safety performance estimation model of lithium-ion batteries for electric vehicles under dynamic compression , 2021 .

[9]  P. Wang,et al.  Optimization design of a parallel air-cooled battery thermal management system with spoilers , 2021 .

[10]  Qing Gao,et al.  Studies on thermal management of lithium-ion battery using non-metallic heat exchanger , 2021 .

[11]  Alireza Mahdavi Nejad,et al.  Lithium-ion battery thermal management system with Al2O3/AgO/CuO nanofluids and phase change material , 2020 .

[12]  Chunjing Lin,et al.  Heat generation quantification of high-specific-energy 21700 battery cell using average and variable specific heat capacities , 2020 .

[13]  M. Wohlfahrt‐Mehrens,et al.  18650 vs. 21700 Li-ion cells – A direct comparison of electrochemical, thermal, and geometrical properties , 2020 .

[14]  Liu Zhengyu,et al.  Simulation study of lithium-ion battery thermal management system based on a variable flow velocity method with liquid metal , 2020 .

[15]  X. Mei,et al.  Cooling capacity of a novel modular liquid-cooled battery thermal management system for cylindrical lithium ion batteries , 2020 .

[16]  Moo-Yeon Lee,et al.  Investigation on thermal performance of water-cooled Li-ion pouch cell and pack at high discharge rate with U-turn type microchannel cold plate , 2020, International Journal of Heat and Mass Transfer.

[17]  F. Garoosi,et al.  Presenting two new empirical models for calculating the effective dynamic viscosity and thermal conductivity of nanofluids , 2020 .

[18]  M. Colledani,et al.  Lithium-ion batteries towards circular economy: A literature review of opportunities and issues of recycling treatments. , 2020, Journal of environmental management.

[19]  M. Kiani,et al.  Hybrid thermal management of lithium-ion batteries using nanofluid, metal foam, and phase change material: an integrated numerical–experimental approach , 2020, Journal of Thermal Analysis and Calorimetry.

[20]  Zhuqian Zhang,et al.  Experimental and numerical study of a passive thermal management system using flat heat pipes for lithium-ion batteries , 2020 .

[21]  Guoqing Zhang,et al.  Characterization and experimental investigation of aluminum nitride-based composite phase change materials for battery thermal management , 2020 .

[22]  Hengyun Zhang,et al.  Thermal performance of a cylindrical battery module impregnated with PCM composite based on thermoelectric cooling , 2019 .

[23]  S. Funke,et al.  The impact of ambitious fuel economy standards on the market uptake of electric vehicles and specific CO2 emissions , 2019 .

[24]  Shuangfeng Wang,et al.  A compact and lightweight liquid-cooled thermal management solution for cylindrical lithium-ion power battery pack , 2019 .

[25]  Fei Zhou,et al.  Thermal management of cylindrical lithium-ion battery based on a liquid cooling method with half-helical duct , 2019, Applied Thermal Engineering.

[26]  Wen Ye,et al.  Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger , 2019, International Journal of Heat and Mass Transfer.

[27]  Jianqiu Li,et al.  Boundaries of high-power charging for long-range battery electric car from the heat generation perspective , 2019, Energy.

[28]  Akhil Garg,et al.  A comprehensive analysis and optimization process for an integrated liquid cooling plate for a prismatic lithium-ion battery module , 2019, Applied Thermal Engineering.

[29]  M. Sharifpur,et al.  Experimental investigation of convection heat transfer in the transition flow regime of aluminium oxide-water nanofluids in a rectangular channel , 2019, International Journal of Heat and Mass Transfer.

[30]  Ben Ye,et al.  Design and Optimization of Cooling Plate for Battery Module of an Electric Vehicle , 2019, Applied Sciences.

[31]  Weixiong Wu,et al.  A critical review of battery thermal performance and liquid based battery thermal management , 2019, Energy Conversion and Management.

[32]  Kai Peter Birke,et al.  Effect of different cooling configurations on thermal gradients inside cylindrical battery cells , 2019, Journal of Energy Storage.

[33]  Zhaohua Yang,et al.  A Review of Lithium-Ion Battery for Electric Vehicle Applications and Beyond , 2019, Energy Procedia.

[34]  Weixiong Wu,et al.  Cooling efficiency improvement of air-cooled battery thermal management system through designing the flow pattern , 2019, Energy.

[35]  Chengyi Song,et al.  Temperature effect and thermal impact in lithium-ion batteries: A review , 2018, Progress in Natural Science: Materials International.

[36]  Moo-Yeon Lee,et al.  Cooling Performance Characteristics of 20 Ah Lithium-Ion Pouch Cell with Cold Plates along Both Surfaces , 2018, Energies.

[37]  Jiyun Zhao,et al.  Investigation into the effectiveness of nanofluids on the mini-channel thermal management for high power lithium ion battery , 2018, Applied Thermal Engineering.

[38]  Jiajia Yan,et al.  Water cooling based strategy for lithium ion battery pack dynamic cycling for thermal management system , 2018 .

[39]  Guoqing Zhang,et al.  A thermal management system for rectangular LiFePO4 battery module using novel double copper mesh-enhanced phase change material plates , 2017 .

[40]  Partha P. Mukherjee,et al.  Exploring the efficacy of nanofluids for lithium-ion battery thermal management , 2017 .

[41]  Guoqing Zhang,et al.  Experimental study on a novel battery thermal management technology based on low density polyethylene-enhanced composite phase change materials coupled with low fins , 2016 .

[42]  Davood Toghraie,et al.  Experimental study of the effect of solid volume fraction and Reynolds number on heat transfer coefficient and pressure drop of CuO–Water nanofluid , 2016 .

[43]  M. Sharifpur,et al.  Influence of ultrasonication energy on the dispersion consistency of Al2O3–glycerol nanofluid based on viscosity data, and model development for the required ultrasonication energy density , 2016 .

[44]  M. Fowler,et al.  Thermal modeling and validation of temperature distributions in a prismatic lithium-ion battery at different discharge rates and varying boundary conditions , 2016 .

[45]  Xiaosong Hu,et al.  Coestimation of SOC and Three-Dimensional SOT for Lithium-Ion Batteries Based on Distributed Spatial–Temporal Online Correction , 2023, IEEE Transactions on Industrial Electronics.

[46]  M. Kiani,et al.  A novel nanofluid cooling system for modular lithium-ion battery thermal management based on wavy/stair channels , 2022, International Journal of Thermal Sciences.

[47]  Efstathios E. Michaelides,et al.  Thermodynamics and energy usage of electric vehicles , 2020 .

[48]  M. Wohlfahrt‐Mehrens,et al.  Energy Density of Cylindrical Li-Ion Cells: A Comparison of Commercial 18650 to the 21700 Cells , 2018 .

[49]  M. I. Pryazhnikov,et al.  Thermal conductivity measurements of nanofluids , 2017 .

[50]  Rui Zhao,et al.  An experimental study of heat pipe thermal management system with wet cooling method for lithium ion batteries , 2015 .