UPM indoor tyre traction testing facility

Abstract Universiti Putra Malaysia (UPM) tyre traction testing facility was designed and developed to spearhead fundamental research on traction mechanics with high-lug agricultural tyres on tropical soils. This available facility consists of a moving carriage with a cantilever-mounted tyre that moves in either forward or reverse directions on rails well above a soil tank. The present facility set-up was able to operate in either: (a) towing test mode for tyre motion resistance studies, or (b) driving test mode for tyre net traction and tractive efficiency studies. The test tyre on the moving carriage under the towing test mode was made to rotate and engage onto the soil surface in the tank through a chain drive system. Under the driving test mode, the test tyre on the moving carriage was powered to rotate by a motor and a gearbox system with an additional pull provided by a cable-pulley mechanism connected to a tower with hanging dead weights. All controls on the moving carriage were activated from the main control console. Respective transducers were positioned at various localities within and interfaced to a data acquisition system to measure tyre horizontal and vertical forces, tyre sinkage, tyre speed and motion carriage speed. The data acquisition system was able to receive the measured signals in real time, display on the monitor screen and record into its CPU storage memory. Static calibration tests on various associated transducers showed excellent linearity with coefficients of determination ( r 2 ) of close to 1. The developed facility was successfully tested to determine motion resistance and net traction ratios for high-lug agricultural tyre at the recommended inflation pressure on sandy clay loam soil.