Effects of gradient nanostructures on the tribological properties and projectile abrasion during high-speed penetration in AerMet100 Steel

[1]  Jiangbo Cheng,et al.  Hydro-abrasive erosion behaviors of HVOF sprayed carbide-based cermet coatings in simulated seawater slurries , 2022, Tribology International.

[2]  Xiulin Liu,et al.  Effects of Cu/Si on the microstructure and tribological properties of FeCoCrNi high entropy alloy coating by laser cladding , 2022, Wear.

[3]  Bo Chen,et al.  Predicting laser penetration welding states of high-speed railway Al butt-lap joint based on EEDM-SVM , 2022, Journal of Materials Research and Technology.

[4]  Ao Zhang,et al.  A fractal comminution approach for scaling issues of penetration failure of concrete target , 2022, Engineering Failure Analysis.

[5]  Xuan Liu,et al.  Promoted low-temperature plasma nitriding for improving wear performance of arc-deposited ceramic coatings on Ti6Al4V alloy via shot peening pretreatment , 2022, Journal of Materials Research and Technology.

[6]  Chuanhai Jiang,et al.  Surface characteristic and wear resistance of S960 high-strength steel after shot peening combing with ultrasonic sprayed graphene oxide coating , 2022, Journal of Materials Research and Technology.

[7]  H. Ding,et al.  Microstructure, mechanical and tribological performances of a directionally solidified γ-TiAl alloy , 2021 .

[8]  Jianguang Fang,et al.  Projectile impact resistance of fibre-reinforced geopolymer-based ultra-high performance concrete (G-UHPC) , 2021, Construction and Building Materials.

[9]  Zhihua Wang,et al.  Application of ultrasonic nanocrystal surface modification (UNSM) technique for surface strengthening of titanium and titanium alloys: a mini review , 2021 .

[10]  S. Bhattacharya,et al.  Elevated temperature adhesion and junction growth mechanisms in Al–Mg alloys sliding in argon and air , 2021, Wear.

[11]  Pingping Hou,et al.  Analysis on surface damage of M50 steel at impact-sliding contacts , 2020 .

[12]  L. H. Poh,et al.  Resistance of cement-based materials against high-velocity small caliber deformable projectile impact , 2020 .

[13]  J. Ning,et al.  Failure behavior of projectile abrasion during high-speed penetration into concrete , 2020 .

[14]  Huajian Gao,et al.  Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys , 2020, Nature Reviews Materials.

[15]  K. Lu,et al.  Simultaneous enhancement of stress- and strain-controlled fatigue properties in 316L stainless steel with gradient nanostructure , 2019, Acta Materialia.

[16]  J. Ning,et al.  Failure mechanism of reinforced concrete subjected to projectile impact loading , 2019, Engineering Failure Analysis.

[17]  G. Kermouche,et al.  Microstructural and micromechanical investigations of surface strengthening mechanisms induced by repeated impacts on pure iron , 2018, Materials & Design.

[18]  K. Sun,et al.  Effect of process duration on the microstructures of fast multiple rotation rolling-induced nanocrystalline layer and its wear properties , 2018 .

[19]  Zhenyao Wang,et al.  Strain-induced formation of a gradient nanostructured surface layer on an ultrahigh strength bearing steel , 2017, Journal of Materials Science & Technology.

[20]  L. Lu,et al.  Investigation on the scuffing resistance of ductile cast iron as affected by fine particle bombardment to produce surface hardened layer and micro-dimpled surface , 2017 .

[21]  Yuntian Zhu,et al.  Strength and ductility of gradient structured copper obtained by surface mechanical attrition treatment , 2016 .

[22]  G. Song,et al.  Effect of electropulsing on surface mechanical properties and microstructure of AISI 304 stainless steel during ultrasonic surface rolling process , 2016 .

[23]  Z. Guan,et al.  Study mass loss at microscopic scale for a projectile penetration into concrete , 2014 .

[24]  K. Lu.  Making strong nanomaterials ductile with gradients , 2014, Science.

[25]  X. Liang,et al.  Devitrification of arc-sprayed FeBSiNb amorphous coatings: Effects on wear resistance and mechanical behavior , 2013 .

[26]  Bin Wang,et al.  Different Scale Experiments of High Velocity Penetration With Concrete Targets , 2013 .

[27]  Wei Zhang,et al.  An investigation on mass loss of ogival projectiles penetrating concrete targets , 2011 .

[28]  Yusheng Li,et al.  Dry sliding tribological properties of nanostructured copper subjected to dynamic plastic deformation , 2011 .

[29]  Bin-shi Xu,et al.  Effect of surface nanocrystallization on the tribological properties of 1Cr18Ni9Ti stainless steel , 2011 .

[30]  N. Tao,et al.  Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper , 2011, Science.

[31]  Lei Lu,et al.  Ultrahigh Strength and High Electrical Conductivity in Copper , 2004, Science.

[32]  H. W. Zhang,et al.  Development of Nanostructures in Metallic Materials with Low Stacking Fault Energies During Surface Mechanical Attrition Treatment (SMAT) , 2003 .

[33]  Lu,et al.  Superplastic extensibility of nanocrystalline copper at room temperature , 2000, Science.

[34]  M. J. Forrestal,et al.  Penetration of concrete targets with ogive-nose steel rods , 1998 .

[35]  N. S. Brar,et al.  PENETRATION OF GROUT AND CONCRETE TARGETS WITH OGIVE-NOSE STEEL PROJECTILES , 1996 .

[36]  F. Huang,et al.  Projectile Nose Mass Abrasion of High-Speed Penetration into Concrete , 2012 .