Effect of vertex singularities on stress intensities near plate free surfaces

The stress intensity factor (SIF) distribution along the front of a through-the-thickness crack is significantly influenced by the presence of the 3D corner (vertex) singularities. All past 3D finite element studies indicated that for mode I, SIF rapidly decreases near the free surface and for mode II, it sharply increases. From the previous numerical simulations, it is unclear what the limiting values of SIF near the surface are and whether these values are infinite or bounded at the vertex point. In this paper, we conduct a careful finite element study and propose a theoretical equation, which describes the SIF behaviour near the vertex. We demonstrate that the asymptotic behaviour of SIF near the surface is governed by the difference in the strength of the corner and edge singularities. Furthermore, we validate our numerical approach and calculations by utilising the invariant properties of J-integral.

[1]  Zhuang He,et al.  A simplified method for the evaluation of fatigue crack front shapes under mode I loading , 2014, International Journal of Fracture.

[2]  Andrei Kotousov,et al.  Fracture in plates of finite thickness , 2007 .

[3]  Filippo Berto,et al.  The effects of different boundary conditions on three-dimensional cracked discs under anti-plane loading , 2015 .

[4]  Filippo Berto,et al.  A review of the volume-based strain energy density approach applied to V-notches and welded structures , 2009 .

[5]  Filippo Berto,et al.  Three‐dimensional stress fields due to notches in plates under linear elastic and elastic–plastic conditions , 2015 .

[6]  Andrei Kotousov,et al.  Induced out-of-plane mode at the tip of blunt lateral notches and holes under in-plane shear loading , 2012 .

[7]  Andrei Kotousov,et al.  Fundamental solutions for the generalised plane strain theory , 2002 .

[8]  Andrei Kotousov,et al.  Effect of the thickness on elastic deformation and quasi-brittle fracture of plate components , 2010 .

[9]  Andrei Kotousov,et al.  Effect of plate thickness on stress state at sharp notches and the strength paradox of thick plates , 2010 .

[10]  P. Lopez‐Crespo,et al.  Stress intensity factor analysis of through thickness effects , 2013 .

[11]  L. Pook.  A 50‐year retrospective review of three‐dimensional effects at cracks and sharp notches , 2013 .

[12]  Andrea Carpinteri,et al.  Stress intensity factors and fatigue growth of surface cracks in notched shells and round bars: two decades of research work , 2013 .

[13]  L. P. Pook,et al.  Five decades of crack path research , 2010 .

[14]  L. Freund,et al.  Transverse shear effects for through-cracks in an elastic plate , 1985 .

[15]  Mabrouk Ben Tahar,et al.  Analytical determination of coefficients in crack-tip stress expansions for a finite crack in an infinite plane medium , 2012 .

[16]  D. Radaj,et al.  State‐of‐the‐art review on extended stress intensity factor concepts , 2014 .

[17]  Wanlin Guo,et al.  The out-of-plane constraint of mixed-mode cracks in thin elastic plates , 2007 .

[18]  J. Benthem.  The quarter-infinite crack in a half space; Alternative and additional solutions , 1980 .

[19]  Filippo Berto,et al.  Coupled fracture mode of a cracked disc under anti-plane loading , 2014 .

[20]  Andrei Kotousov,et al.  A fatigue crack growth model for interacting cracks in a plate of arbitrary thickness , 2014 .

[21]  J. Benthem.  State of stress at the vertex of a quarter-infinite crack in a half-space , 1977 .

[22]  Luboš Náhlík,et al.  Numerical estimation of the fatigue crack front shape for a specimen with finite thickness , 2012 .

[23]  L. P. Pook,et al.  Some implications of corner point singularities , 1994 .

[24]  Valéry Valle,et al.  Experimental determination and empirical representation of out-of-plane displacements in a cracked elastic plate loaded in mode I , 2000 .

[25]  David M. Parks,et al.  Antisymmetrical 3-D stress field near the crack front of a thin elastic plate , 1989 .

[26]  L. P. Pook.  Finite element analysis of corner point displacements and stress intensity factors for narrow notches in square sheets and plates , 2000 .

[27]  Zohar Yosibash,et al.  On the Path Independency of the Point-wise J Integral in Three-dimensions , 2005 .

[28]  Andrei Kotousov,et al.  Three-dimensional stress constraint in an elastic plate with a notch , 2002 .

[29]  Luboš Náhlík,et al.  The effect of a free surface on fatigue crack behaviour , 2010 .

[30]  Luiz Carlos Hernandes Ricardo,et al.  Extent of surface regions near corner points of notched cracked bodies subjected to mode-I loading , 2012 .

[31]  Andrei Kotousov,et al.  Transverse singular effects in V-shaped notches stressed in mode II , 2010 .

[32]  Filippo Berto,et al.  Three-dimensional effects in finite thickness plates weakened by rounded notches and holes under in-plane shear , 2013 .

[33]  Yuh J. Chao,et al.  On the failure of cracks under mixed-mode loads , 1997 .

[34]  Wolfgang G. Knauss,et al.  An interpretation of Twyman-Green interferograms from static and dynamic fracture experiments , 1995 .

[35]  Pavel Hutař,et al.  Experimental and numerical analysis of in- and out- of plane constraint effects on fracture parameters: Aluminium alloy 2024 , 2013 .

[36]  M.R.M. Aliha,et al.  The effects of thickness and Poisson’s ratio on 3D mixed-mode fracture , 2013 .

[37]  D. Nowell,et al.  The influence of the Poisson’s ratio and corner point singularities in three-dimensional plasticity-induced fatigue crack closure: A numerical study , 2008 .

[38]  Pook.  Crack profiles and corner point singularities , 2000 .

[39]  D. Camas,et al.  Crack front curvature: Influence and effects on the crack tip fields in bi-dimensional specimens , 2012 .

[40]  Andrea Carpinteri,et al.  Surface cracks in fatigued structural components: a review , 2013 .

[41]  David M. Parks,et al.  Three-dimensional stress field near the crack front of a thin elastic plate , 1988 .

[42]  Filippo Berto,et al.  Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches , 2014 .

[43]  Andrei Kotousov,et al.  On higher order terms and out-of-plane singular mode , 2011 .

[44]  V. Doquet,et al.  3D shear-mode fatigue crack growth in maraging steel and Ti-6Al-4V , 2010 .

[45]  M. Williams,et al.  On the Stress Distribution at the Base of a Stationary Crack , 1956 .

[46]  R. D. Gregory,et al.  The interior solution for linear problems of elastic plates , 1988 .

[47]  D. Radaj.  State-of-the-art review on the local strain energy density concept and its relation to the J-integral and peak stress method , 2015 .

[48]  Z. Bažant,et al.  Surface singularity and crack propagation , 1979 .

[49]  Andrea Carpinteri,et al.  Interpreting some experimental evidences of fatigue crack size effects through a kinked crack model , 2015 .

[50]  Michele Zappalorto,et al.  A three-dimensional stress field solution for pointed and sharply radiused V-notches in plates of finite thickness , 2012 .