Effect of Crystalline Morphology on Electrical Tree Growth Characteristics of High-Density and Low-Density Polyethylene Blend Insulation

The electrical tree initiation and propagation behaviors are a key issue for the polyethylene-based cable insulation. This paper focuses on the effect of crystalline morphology on electrical tree growth characteristics of high-density and low-density polyethylene (HDPE/LDPE) blend insulation. In this paper, the electrical tree growth characteristics of HDPE/LDPE blends with HDPE mass fractions of 0, 10, 15, 20 wt% are investigated under repetitive impulse voltage at 40, 60, 80 °C. It is found that with the rise of HDPE content from 0 to 15 wt%, the growth rate and accumulated damage of electrical tree decreases, with the morphology of electrical tree tending to bush tree. The increasing of voltage amplitude improves the energy of injected charge while the temperature rise leads to the relaxation of molecular chain, which both result in the promotion of collision ionization, thus increasing the density of electrical tree. Compared with branch tree, bush tree illustrates better inhibition of discharge tracks due to uniform electric field at the end of branches. The crystalline characteristics of HDPE/LDPE blends indicate that the crystallinity increases with the addition of HDPE, and the blend comprising 15 wt% HDPE in an LDPE matrix apparently reduces the average size of spherulites and improves the distribution of spherulites evenly. The upsurge of crystal-amorphous interface leads to the increase of deep trap energy level density and the decrease of carrier mobility. Carrier injection and migration at the interface between crystalline and amorphous regions are restrained, thus inhibiting the growth of electrical tree. It is concluded that the crystalline morphology modified by polymer blending has a significant effect on the electrical tree growth characteristics.

[1]  Villgot Englund,et al.  Highly Insulating Polyethylene Blends for High-Voltage Direct-Current Power Cables. , 2017, ACS macro letters.

[2]  Xingyi Huang,et al.  Material progress toward recyclable insulation of power cables. Part 1: Polyethylene-based thermoplastic materials: Dedicated to the 80th birthday of professor Toshikatsu Tanaka , 2019, IEEE Electrical Insulation Magazine.

[3]  J. Hjerrild,et al.  Effect of Insulation Properties on the Field Grading of Solid Dielectric DC Cable , 2001, IEEE Power Engineering Review.

[4]  J. G. Simmons,et al.  Theory of Isothermal Currents and the Direct Determination of Trap Parameters in Semiconductors and Insulators Containing Arbitrary Trap Distributions , 1973 .

[5]  T. Takada,et al.  Space charge trapping in electrical potential well caused by permanent and induced dipoles for LDPE/MgO nanocomposite , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[6]  G. Chen,et al.  Propagation mechanism of electrical tree in XLPE cable insulation by investigating a double electrical tree structure , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[7]  Zhonglei Li,et al.  Polymeric insulation for high-voltage dc extruded cables: challenges and development directions , 2018, IEEE Electrical Insulation Magazine.

[8]  Demin Tu,et al.  Charge distribution and crystalline structure in polyethylene nucleated with sorbitol , 2001 .

[9]  B. X. Du,et al.  Electrical tree characteristics of XLPE under repetitive pulse voltage in low temperature , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[10]  M. J. Thomas,et al.  Electrical treeing and the associated PD characteristics in LDPE nanocomposites , 2012, IEEE Transactions on Dielectrics and Electrical Insulation.

[11]  K. W. Barber,et al.  A general review of polymeric insulation for use in HVDC cables , 2003 .

[12]  Takahashi Toru,et al.  Development of the new polymer insulating materials for HVDC cable , 1992 .

[13]  C. Laurent,et al.  Advances in high-field insulating polymeric materials over the past 50 years , 2013, IEEE Electrical Insulation Magazine.

[14]  Kichinosuke Yahagi,et al.  Dielectric Properties and Morphology in Polyethylene , 1980, IEEE Transactions on Electrical Insulation.

[15]  D. Tu,et al.  Space charge distribution and crystalline structure in low density polyethylene (LDPE) blended with high density polyethylene (HDPE) , 2005 .

[16]  Zhiqiang Xu,et al.  Charge trapping and detrapping in polymeric materials , 2009 .

[17]  M. Andersson Polyethylene Blends, a Material Concept for Future HVDC-cable Insulation , 2017 .

[18]  B. X. Du,et al.  Temperature-dependent electrical tree in silicone rubber under repetitive pulse voltage , 2017, IEEE Transactions on Dielectrics and Electrical Insulation.

[19]  Xiaohong Zhang,et al.  Investigation on electrical tree propagation in polyethylene based on etching method , 2017 .

[20]  Xingyi Huang,et al.  Polypropylene based thermoplastic polymers for potential recyclable HVDC cable insulation applications , 2017, IEEE Transactions on Dielectrics and Electrical Insulation.

[21]  P. Molinié,et al.  New methodology for surface potential decay measurements: application to study charge injection dynamics on polypropylene films , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[22]  T. Han,et al.  Electrical tree characteristics in silicone rubber under repetitive pulse voltage , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[23]  D. Tu,et al.  Dielectric Properties and Crystalline Morphology of Low Density Polyethylene Blended with Metallocene Catalyzed Polyethylene , 2008, IEEE Transactions on Dielectrics and Electrical Insulation.

[24]  J. H. Mason Breakdown of Solid Dielectrics in Divergent Fields , 1955 .

[25]  George Chen,et al.  Review of high voltage direct current cables , 2015 .

[26]  S. Alapati,et al.  Effect of morphology on electrical treeing in low density polyethylene nanocomposites , 2014 .