Synthesis and powder generation of powder coatings using supercritical carbon dioxide

Abstract This paper reports an integral continuous process of polymerization and micronization of powder coatings using supercritical CO 2 as solvent. Combining different process steps into one single process, using ultra short production chains, can be one future use of supercritical fluids. This contribution is therefore an example of how such integral processes can be designed and how the development of new products can look like using supercritical fluids. An acrylic resin consisting of glycidyl methacrylate, methyl methacrylate and styrene was chosen as polymer system for use of thermosetting material for acrylic powder coating application. The reaction was performed in a tubular reactor. A monomer conversion of more than 96% was achieved with short reaction times of about 30 min at a temperature of 135 °C and at a pressure of 30 MPa in a homogeneous CO 2 phase. The resulting polymer has a number average molecular weight of about 2500 g/mol with a narrow polydispersity index of 1.6. In this process, the synthesis step in compressed carbon dioxide was followed by a high pressure micronization using the well-known PGSS process. Thus, small particles of about 25 μm were obtained. Simultaneously, residual monomers were removed from the polymer product with the escaping CO 2 -gas, achieving a high purity grade. The process is designed as a straight forward process combining synthesis, micronization and purification of a polymer without depressurization between the unit operations and demonstrates the benefits which supercritical fluid technologies offer for product and process development.

[1]  W. J. Simonsick,et al.  Studies of higher temperature polymerization ofn-butyl methacrylate andn-butyl acrylate , 2002 .

[2]  Marcus Petermann,et al.  Manufacture of Powder Coatings by Spraying of Gas-Enriched Melts , 2001 .

[3]  Z. Guan,et al.  Synthesis of Fluoropolymers in Supercritical Carbon Dioxide , 1992, Science.

[4]  R. Dohrn,et al.  High-pressure fluid-phase equilibria: Experimental methods and systems investigated (2000–2004) , 2010 .

[5]  M. Buback,et al.  Tubular reactor synthesis of styrene–methacrylate copolymers in solution with supercritical carbon dioxide , 2006 .

[6]  Mark A. McHugh,et al.  Solubility of Polymers and Copolymers in Supercritical CO2 , 1996 .

[7]  W. Wagner,et al.  A New Equation of State for Carbon Dioxide Covering the Fluid Region from the Triple‐Point Temperature to 1100 K at Pressures up to 800 MPa , 1996 .

[8]  Jtf Jos Keurentjes,et al.  Residual Monomer Reduction in Polymer Latex Products by Extraction with Supercritical Carbon Dioxide , 2011 .

[9]  S. Beuermann,et al.  Homogeneous phase polymerization of vinylidene fluoride in supercritical carbon dioxide , 2007 .

[10]  Walter Leitner,et al.  Chemical synthesis using supercritical fluids , 1999 .

[11]  Z. Guan,et al.  Homogeneous Free Radical Polymerizations in Supercritical Carbon Dioxide: 2. Thermal Decomposition of 2,2′-Azobis(isobutyronitrile) , 1993 .

[12]  M. Buback,et al.  Homogeneous free‐radical polymerization of styrene in supercritical CO2 , 1999 .

[13]  P. Lange.  Powder Coatings Chemistry and Technology , 2004 .

[14]  Andreas Kilzer,et al.  Neue Entwicklungen bei Reinigungs‐ und Trennprozessen mit über‐ und nahkritischen Fluiden , 2011 .

[15]  Andrew I. Cooper,et al.  Polymer synthesis and processing using supercritical carbon dioxide , 2000 .

[16]  P. H. Araújo,et al.  Techniques for reducing residual monomer content in polymers: A review , 2002 .

[17]  M. Buback,et al.  Free-Radical Polymerization in Reactive Supercritical Fluids , 2007 .

[18]  Dietrich Braun,et al.  Polymer Synthesis: Theory and Practice: Fundamentals, Methods, Experiments , 2001 .