Recent advances in twist drill design for composite machining: A critical review
暂无分享,去创建一个
Eric Dimla | Sikiru Oluwarotimi Ismail | Hom Nath Dhakal | S. O. Ismail | I. Popov | H. Dhakal | E. Dimla | Ivan Popov | S. Ismail
[1] Hang Gao,et al. Mechanism of damage generation during drilling of carbon/epoxy composites and titanium alloy stacks , 2014 .
[2] L. T. Harper,et al. A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills , 2015 .
[3] John S. Agapiou,et al. Metal Cutting Theory and Practice , 1996 .
[4] Ozden Isbilir,et al. Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites , 2013 .
[5] A. Velayudham,et al. Evaluation of drilling characteristics of high volume fraction fibre glass reinforced polymeric composite , 2005 .
[6] H. Hochenga,et al. Effects of special drill bits on drilling-induced delamination of composite materials , 2006 .
[7] M. C. Shaw. Metal Cutting Principles , 1960 .
[8] João Paulo Davim,et al. Tools (Geometry and Material) and Tool Wear , 2008 .
[9] Pedro Reis,et al. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments , 2003 .
[10] S. Kaldor,et al. Drill Point Geometry and Optimization , 1982 .
[11] Liangshan Xiong,et al. A new methodology for designing a curve-edged twist drill with an arbitrarily given distribution of the cutting angles along the tool cutting edge , 2009 .
[12] Sangkee Min,et al. FINITE ELEMENT MODELING OF BURR FORMATION IN METAL CUTTING , 2001 .
[13] U. Khashaba. Delamination in drilling GFR-thermoset composites , 2003 .
[14] W König,et al. Developments in drilling and contouring composites containing kevlar , 1984 .
[15] M. Vedani,et al. Metal Matrix Composites Reinforced by Nano-Particles—A Review , 2014 .
[16] Puneet Tandon,et al. Modeling of twist drills in terms of 3D angles , 2008 .
[17] Patrick Kwon,et al. Tool wear in drilling of composite/titanium stacks using carbide and polycrystalline diamond tools , 2011 .
[18] Wen-Chou Chen,et al. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates , 1997 .
[19] Jaromir Audy. A study of computer-assisted analysis of effects of drill geometry and surface coating on forces and power in drilling , 2008 .
[20] C. Sanjay. COMPARATIVE ANALYSIS OF VARIOUS METHODS OF SURFACE ROUGHNESS IN DRILLING , 2006 .
[21] Dave Kim,et al. Drilling process optimization for graphite/bismaleimide–titanium alloy stacks , 2004 .
[22] D. C. H. Yang,et al. Effects of Feedrate and Chisel Edge on Delamination in Composites Drilling , 1993 .
[23] Hong Hocheng,et al. Delamination During Drilling in Composite Laminates , 1990 .
[24] Subramonian Sivarao. Comparison of statistical and mathematical methods for determination of tool wear in drilling , 2004 .
[25] F. Stan,et al. Toroidal grinding method for curved cutting edge twist drills , 2009 .
[26] Hong Hocheng,et al. Analysis of delamination in drilling composite materials using core drill , 2003 .
[27] Shih-Chieh Lin,et al. Drilling carbon fiber-reinforced composite material at high speed , 1996 .
[28] Yiğit Karpat,et al. Drilling thick fabric woven CFRP laminates with double point angle drills , 2012 .
[29] Janakarajan Ramkumar,et al. Effect of workpiece vibration on drilling of GFRP laminates , 2004 .
[30] Dave Kim,et al. A study on the drilling of composite and titanium stacks , 2001 .
[31] P. M. Webb. Dynamics of the twist drilling process , 1993 .
[32] Jun Ni,et al. Analysis and optimization of drill cross-sectional geometry , 1999 .
[33] Puneet Tandon,et al. Geometric modeling and validation of twist drills with a generic point profile , 2012 .
[34] Hans Kurt Tönshoff,et al. Machining of Holes Developments in Drilling Technology , 1994 .
[35] Ozden Isbilir,et al. Delamination and wear in drilling of carbon-fiber reinforced plastic composites using multilayer TiAlN/TiN PVD-coated tungsten carbide tools , 2012 .
[36] E.J.A. Armarego,et al. Predictive Force Models for Point-Thinned and Circular Centre Edge Twist Drill Designs , 1996 .
[37] C. K. H. Dharan,et al. Machining parameters for an intelligent machining system for composite laminates , 2000 .
[38] E.J.A. Armarego,et al. Computer-Aided Modelling of the Fluting Process for Twist Drill Design and Manufacture , 1998 .
[39] Hong Hocheng,et al. Comprehensive analysis of delamination in drilling of composite materials with various drill bits , 2003 .
[40] Christopher David Cook,et al. Drilling of carbon composites using a one shot drill bit. Part I: Five stage representation of drilling and factors affecting maximum force and torque , 2006 .
[41] David K. Aspinwall,et al. Hole quality assessment following drilling of metallic-composite stacks , 2011 .
[42] Athulan Vijayaraghavan. Automated Drill Design Software , 2006 .
[43] B. K Hinds,et al. Analysis of stresses in micro-drills using the finite element method , 2000 .
[44] Eberhard Abele,et al. Simulation-based twist drill design and geometry optimization , 2010 .
[45] Kenneth A. Loparo,et al. Tool wear condition monitoring in drilling operations using hidden Markov models (HMMs) , 2001 .
[46] Stefan Simeonov Dimov,et al. Prototype tooling for producing small series of polymer microparts , 2011 .
[47] C. Sujatha,et al. Twist drill deformation and optimum drill geometry , 1995 .
[48] David K. Aspinwall,et al. Drill geometry and operating effects when cutting small diameter holes in CFRP , 2009 .
[49] Herbert Schulz,et al. Using the principle of genetic algorithms (GA) for th optimization of the chip flute of drilling tools , 2001 .
[50] Toshiki Hirogaki,et al. Investigation on cutting mechanism in small diameter drilling for GFRP (thrust force and surface roughness at drilled hole wall) , 1997 .
[51] Subramonian Sivarao,et al. Comparative analysis and modeling of surface roughness in drilling , 2004 .
[52] Farghalli A. Mohamed,et al. Particulate reinforced metal matrix composites — a review , 1991, Journal of Materials Science.
[53] H. Hochengb,et al. Effect of tool wear on delamination in drilling composite materials , 2007 .
[54] Janakarajan Ramkumar,et al. An enhancement of the machining performance of GFRP by oscillatory assisted drilling , 2004 .
[55] S. Prabu,et al. An Experimental Study of Influence of Drill Geometry on Drilling of Carbon Fibre Reinforced Plastic Composites , 2012 .
[56] Fabrizio Scarpa,et al. Machining behaviour of three high-performance engineering plastics , 2015 .
[57] S. M. Kulkarni,et al. Influence of process parameters on cutting force and torque during drilling of glass–fiber polyester reinforced composites , 2005 .
[58] Tool wear and hole quality when single-shot drilling of metallic-composite stacks with diamond-coated tools , 2014 .
[59] C. Laymon. A. study , 2018, Predication and Ontology.
[60] J. Audy. A STUDY OF DRY MACHINING PERFORMANCE OF THE TiN, Ti(Al,N) AND Ti(C,N) COATINGS AND A M35 HSS TYPE TOOL SUBSTRATE MATERIAL ASSESSED THROUGH BASIC CUTTING QUANTITIES GENERATED WHEN ORTHOGONAL TURNING A BISALLOY 360 GRADE STEEL WORK-PIECE MATERIAL , 2008 .
[61] H. Hocheng,et al. Effects of peripheral drilling moment on delamination using special drill bits , 2008 .
[62] João Manuel R. S. Tavares,et al. Drilling tool geometry evaluation for reinforced composite laminates , 2010 .
[63] Eberhard Abele,et al. Optimisation of the chip flute of drilling tools with methods of genetic algorithms , 2002 .
[64] Lan Yan,et al. A practical optimization design of helical geometry drill point and its grinding process , 2013 .
[65] Richard E. DeVor,et al. Chisel edge and cutting lip shape optimization for improved twist drill point design , 2005 .
[66] Xin Wang,et al. Investigation on thrust in vibration drilling of fiber-reinforced plastics , 2004 .
[67] Redouane Zitoune,et al. Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures , 2007 .
[68] Fritz Klocke,et al. 2D-FEM SIMULATION OF THE ORTHOGONAL HIGH SPEED CUTTING PROCESS , 2001 .
[69] Drilling Force in High Speed Drilling Carbon Fibre Reinforced Plastics (CFRP) Using Half Core Drill , 2010 .
[70] Ekkard Brinksmeier,et al. Drilling of Multi-Layer Composite Materials consisting of Carbon Fiber Reinforced Plastics (CFRP), Titanium and Aluminum Alloys , 2002 .
[71] D. C. H. Yang,et al. Delamination-Free Drilling of Composite Laminates , 1994 .
[72] Zhang Linbo,et al. Study on vibration drilling of fiber reinforced plastics with hybrid variation parameters method , 2003 .
[73] I. El-Sonbaty,et al. Factors affecting the machinability of GFR/epoxy composites , 2004 .
[74] S. K. Malhotra,et al. Polymer Composites: THOMAS:PO.COMPOSITES VOL1 O-BK , 2012 .
[75] A. Abrão,et al. The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite , 2008 .
[76] Puneet Tandon,et al. CAD Based Mechanistic Modeling of Forces for Generic Drill Point Geometry , 2010 .
[77] Franck Girot,et al. Modeling and tool wear in drilling of CFRP , 2010 .
[78] Inderdeep Singh,et al. Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element study , 2008 .
[79] Joy P. Dunkers,et al. Polymer COMPOSITES , 2000 .
[80] E. D. Doyle,et al. A study of the wear mechanisms of Ti1−xAlxN and Ti1−x−yAlxCryN coated high-speed steel twist drills under dry machining conditions , 2003 .
[81] C. Tsaob,et al. The path towards delamination-free drilling of composite materials , 2005 .
[82] S. Joshi,et al. Electro-spark coatings for enhanced performance of twist drills , 2008 .
[83] Herbert Schulz,et al. Optimization of the chip flute of drilling tools using the principle of genetic algorithms , 2000 .
[84] H. Hocheng,et al. The effect of chisel length and associated pilot hole on delamination when drilling composite materials , 2003 .
[85] Bernhard Karpuschewski,et al. Magneto-abrasive machining for the mechanical preparation of high-speed steel twist drills , 2009 .
[86] Wei Zhang,et al. A practical method to determine rake angles of twist drill by measuring the cutting edge , 2010 .
[87] R. Krishnamurthy,et al. Effect of point geometry and their influence on thrust and delamination in drilling of polymeric composites , 2007 .
[88] S. O. Ismail,et al. Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates , 2016 .
[89] Raviraj Shetty,et al. Effect of Process Parameters on Delamination, Thrust force and Torque in Drilling of Carbon Fiber Epoxy Composite , 2013 .
[90] Peter J. Heath,et al. Developments in applications of PCD tooling , 2001 .
[91] Azuddin Bin Mamat,et al. Effect of Machining Parameters on Hole Quality of Micro Drilling for Brass , 2009 .
[92] I. Sinclair,et al. Structural performance of discontinuous metal matrix composites , 1997 .
[93] Weilong Cong,et al. A review of mechanical drilling for composite laminates , 2012 .
[94] A. Velayudhama,et al. Acoustic emission based drill condition monitoring during drilling of glass / phenolic polymeric composite using wavelet packet transform , 2005 .
[95] Development of low cost metal matrix composites for commercial applications , 2000 .
[96] Redouane Zitoune,et al. Study of drilling of composite material and aluminium stack , 2010 .
[97] J. Paulo Davim,et al. Drilling carbon fiber reinforced plastics manufactured by autoclave: experimental and statistical study , 2003 .
[98] Jun Wang,et al. A study of high-performance plane rake faced twist drills.: Part I: Geometrical analysis and experimental investigation , 2008 .
[99] K. Chou,et al. Integrated Design and Analysis of Diamond-coated Drills , 2009 .
[100] J. Paulo Davim,et al. Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques , 2008 .
[101] Richard Garrick. Drilling Advanced Aircraft Structures with PCD (Poly- Crystalline Diamond) Drills , 2007 .
[102] Paul Xirouchakis,et al. Experimental analysis of drilling fiber reinforced composites , 2011 .
[103] N. Bhatnagar,et al. Investigation of drilling in fibre-reinforced plastics using response surface methodology , 2011 .
[104] V. Tagliaferri,et al. An Experimental Study of the Drilling of Aramid Composites , 1995 .
[105] Hong Hocheng,et al. Computerized tomography and C-Scan for measuring delamination in the drilling of composite materials using various drills , 2005 .
[106] Frédéric Lachaud,et al. Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills , 2000 .
[107] N. Bhatnagar,et al. Drilling-induced damage in uni-directional glass fiber reinforced plastic (UD-GFRP) composite laminates , 2006 .
[108] E. Capello. Workpiece damping and its effect on delamination damage in drilling thin composite laminates , 2004 .
[109] J. Paulo Davim,et al. Multi-objective optimization of cutting parameters for drilling laminate composite materials by using genetic algorithms , 2006 .
[110] Inderdeep Singh,et al. Drilling of metal matrix composites: Experimental and finite element analysis , 2015 .
[111] A. Abrão,et al. Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites , 2008 .
[112] Taufik,et al. Coating characterization of TiN & TiAIN on burr formation in drilling pragmatic investigation , 2007 .
[113] J. Paulo Davim,et al. Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up , 2004 .
[114] E. Kilickap,et al. Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite , 2010, Expert Syst. Appl..
[115] A. Abrão,et al. Drilling of fiber reinforced plastics: A review , 2007 .
[116] Hong Hocheng,et al. Taguchi analysis of delamination associated with various drill bits in drilling of composite material , 2004 .
[117] David K. Aspinwall,et al. Drilling of Titanium/CFRP/Aluminium Stacks , 2010 .