Cooling rate influences in carbon fibre/PEEK composites. Part II: interlaminar fracture toughness

[1]  Jang-Kyo Kim,et al.  Cooling rate influences in carbon fibre/PEEK composites. Part III: impact damage performance , 2001 .

[2]  Jang‐Kyo Kim,et al.  Cooling rate influences in carbon fibre/PEEK composites. Part 1. Crystallinity and interface adhesion , 2000 .

[3]  T. Vu-khanh,et al.  Influence of Processing on Morphology, Interface, and Delamination in PEEK/Carbon Composites , 1999 .

[4]  R. Mccullough,et al.  Interphase research issues , 1999 .

[5]  Y. Mai,et al.  Engineered interfaces in fiber reinforced composites , 1998 .

[6]  Jang-Kyo Kim.  Methods for Improving Impact Damage Resistance of CFRPs , 1997 .

[7]  H. Kausch,et al.  The influence of moulding conditions on delamination behaviour of carbon-fibre/peak composites , 1994 .

[8]  T. Vu-khanh,et al.  Effect of Molding Parameters on the Interfacial Strength in PEEK/Carbon Composites , 1993 .

[9]  H. Yoon,et al.  Mode I interlaminar fracture toughness of commingled carbon fibre/PEEK composites , 1993, Journal of Materials Science.

[10]  T. Vu-khanh,et al.  Crystallization and fiber/matrix interaction during the molding of PEEK/carbon composites , 1992 .

[11]  L. Drzal,et al.  Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: IV. Mode I and Mode II Fracture Toughness of Graphite/Epoxy Composites , 1992 .

[12]  Jang-Kyo Kim,et al.  Fracture toughness of CFRP with modified epoxy resin matrices , 1992 .

[13]  Y. Mai,et al.  High strength, high fracture toughness fibre composites with interface control—A review , 1991 .

[14]  W. Cantwell,et al.  Cooling Rate Effects in Carbon Fiber/PEEK Composites , 1991 .

[15]  J. G. Williams,et al.  The Effects of Geometry, Rate and Temperature on the Mode I, Mode II and Mixed-Mode I/II Interlaminar Fracture of Carbon-Fibre/Poly(ether-ether ketone) Composites , 1990 .

[16]  H. Chai.  Interlaminar shear fracture of laminated composites , 1990 .

[17]  G. Newaz,et al.  Processing and structural optimization of PEEK composites , 1990 .

[18]  P. Vautey.  Cooling rate effects on the mechanical properties of a semi-crystalline thermoplastic composite , 1990 .

[19]  W. Bradley.  Understanding the Translation of Neat Resin Toughness into Delamination Toughness in Composites , 1991 .

[20]  W. Cantwell,et al.  A study of the delamination resistance of IM6/PEEK composites , 1989 .

[21]  Peter Hine,et al.  Failure mechanisms in continuous carbon-fibre reinforced PEEK composites , 1989 .

[22]  W. Bradley,et al.  The relationship between resin mechanical properties and Mode I delamination fracture toughness , 1988 .

[23]  G. Springer,et al.  The Effects of Crystallinity on the Mechanical Properties of PEEK Polymer and Graphite Fiber Reinforced PEEK , 1987 .

[24]  D. R. Moore,et al.  Interlaminar fracture morphology of carbon fibre/PEEK composites , 1987 .

[25]  J. Seferis,et al.  Annealing effects on the crystallinity of polyetheretherketone (PEEK) and its carbon fiber composite , 1987 .

[26]  Aj Russell,et al.  THE EFFECT OF MATRIX TOUGHNESS ON DELAMINATION: STATIC AND FATIGUE FRACTURE UNDER MODE II SHEAR LOADING OF GRAPHITE FIBER COMPOSITES , 1987 .

[27]  N. J. Johnston,et al.  Matrix Resin Effects in Composite Delamination: Mode I Fracture Aspects , 1987 .

[28]  J. Gillespie,et al.  Mode II Interlaminar Fracture of Graphite/Epoxy and Graphite/PEEK , 1986 .

[29]  Aj Russell,et al.  Moisture and Temperature Effects on the Mixed-Mode Delamination Fracture of Unidirectional Graphite/Epoxy , 1985 .

[30]  J. P. Berry.  Determination of Fracture Surface Energies by the Cleavage Technique , 1963 .