Effect of graphene nanoplatelets as nanofiller in plasticized poly(lactic acid) nanocomposites

Plasticized PLA-based nanocomposites were prepared by melt blending of the matrix with 5 mass% of epoxidized palm oils (EPO) and different amount of graphene nanoplatelets (xGnP). Plasticized PLA (p-PLA) reinforced with 0.3 mass% xGnP resulted in an increase of up to 26.5 and 60.6 % in the tensile strength and elongation at break of the nanocomposites, respectively. Thermogravimetric analysis (TG) and differential scanning calorimetry (DSC) were performed to study the thermal behavior of the prepared nanocomposites. p-PLA reinforced with xGnP shows that increasing the xGnP content triggers a substantial increase in thermal stability. Crystallinity of the nanocomposites as well as cold crystallization and melting temperature did not show any significant changes upon addition of xGnP. However, there is a significant decrease of glass transition temperature up to 0.3 mass% of xGnP incorporation.

[1]  L. Drzal,et al.  Mechanical properties and morphological characterization of exfoliated graphite–polypropylene nanocomposites , 2007 .

[2]  S. Chandrasekaran,et al.  Preparation and characterization of graphite nano-platelet (GNP)/epoxy nano-composite: Mechanical, electrical and thermal properties , 2013 .

[3]  I. Daniel,et al.  Processing of expanded graphite reinforced polymer nanocomposites , 2006 .

[4]  SUPARNA DUTTASINHA,et al.  Graphene: Status and Prospects , 2009, Science.

[5]  H. Belhadjsalah,et al.  Investigation of water absorption in clay-reinforced polypropylene nanocomposites , 2010 .

[6]  E. Woo,et al.  Thermal analysis on phase behavior of poly(l-lactic acid) interacting with aliphatic polyesters , 2012, Journal of Thermal Analysis and Calorimetry.

[7]  D. Colombini,et al.  Plasticization of poly(lactic acid) with oligomeric malonate esteramides: Dynamic mechanical and thermal film properties , 2005 .

[8]  S. Bose,et al.  Recent advances in graphene based polymer composites , 2010 .

[9]  Tzong‐Ming Wu,et al.  Synthesis and characterization of biodegradable poly(l-lactide)/layered double hydroxide nanocomposites , 2010 .

[10]  Lei Song,et al.  Morphology, mechanical and thermal properties of graphene-reinforced poly(butylene succinate) nanocomposites , 2011 .

[11]  P. Cebe,et al.  Electrospun fibers of poly(ethylene terephthalate) blended with poly(lactic acid) , 2014, Journal of Thermal Analysis and Calorimetry.

[12]  H. Fritz,et al.  Plasticizing polylactide—the effect of different plasticizers on the mechanical properties , 1999 .

[13]  Yu Jiugao,et al.  Study of the Properties of Plasticised Poly(Lactic Acid) with Poly(1,3-Butylene Adipate) , 2008 .

[14]  Il-hwan Kim,et al.  Polylactide/Exfoliated Graphite Nanocomposites with Enhanced Thermal Stability, Mechanical Modulus, and Electrical Conductivity , 2010 .

[15]  M. Jonoobi,et al.  Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion , 2010 .

[16]  Ayse Aytac,et al.  Plasticized and unplasticized PLA/organoclay nanocomposites: Short- and long-term thermal properties, morphology, and nonisothermal crystallization behavior , 2012 .

[17]  S. Girois,et al.  Polym. Degrad. Stab. , 1996 .

[18]  Wan Md Zin Wan Yunus,et al.  Poly(lactic acid)/Poly(ethylene glycol) Polymer Nanocomposites: Effects of Graphene Nanoplatelets , 2013 .

[19]  I. Miskioglu,et al.  Tensile modulus modeling of carbon black/polycarbonate, carbon nanotube/polycarbonate, and exfoliated graphite nanoplatelet/polycarbonate composites , 2012 .

[20]  N. Ibrahim,et al.  A Comparative Study on the Mechanical, Thermal and Morphological Characterization of Poly(lactic acid)/Epoxidized Palm Oil Blend , 2012, International journal of molecular sciences.

[21]  Jie Ren,et al.  Thermal stability of copolymer derived from l-lactic acid and poly(tetramethylene) glycol through direct polycondensation , 2012, Journal of Thermal Analysis and Calorimetry.

[22]  Y. Jeong,et al.  Effects of grafted chain length on mechanical and electrical properties of nanocomposites containing polylactide-grafted carbon nanotubes , 2010 .

[23]  M. Bouquey,et al.  Elongational flow mixing for manufacturing of graphite nanoplatelet/polystyrene composites , 2013 .

[24]  Dajun Chen,et al.  Enhanced Mechanical Properties of Graphene-Based Poly(vinyl alcohol) Composites , 2010 .

[25]  G. Shi,et al.  Strong and ductile poly(vinyl alcohol)/graphene oxide composite films with a layered structure , 2009 .

[26]  Chunhui Xu,et al.  Preparation of graphene/poly(vinyl alcohol) nanocomposites with enhanced mechanical properties and water resistance , 2011 .

[27]  F. Hosseini,et al.  Thermal performance of poly(ethylene disulfide)/expanded graphite nanocomposites , 2014, Journal of Thermal Analysis and Calorimetry.

[28]  N. Ibrahim,et al.  Optimization of Tensile Strength of Poly(Lactic Acid)/Graphene Nanocomposites Using Response Surface Methodology , 2012 .

[29]  Xinlong Wang,et al.  Study on the PMMA/GO nanocomposites with good thermal stability prepared by in situ Pickering emulsion polymerization , 2014, Journal of Thermal Analysis and Calorimetry.

[30]  Chin-San Wu,et al.  Study on the preparation and characterization of biodegradable polylactide/multi-walled carbon nanotubes nanocomposites , 2007 .

[31]  Wan Md Zin Wan Yunus,et al.  Graphene Nanoplatelets as Novel Reinforcement Filler in Poly(lactic acid)/Epoxidized Palm Oil Green Nanocomposites: Mechanical Properties , 2012, International journal of molecular sciences.

[32]  X. Ning,et al.  Influences of coupling agent on thermal properties, flammability and mechanical properties of polypropylene/thermoplastic polyurethanes composites filled with expanded graphite , 2013, Journal of Thermal Analysis and Calorimetry.

[33]  Chao Gao,et al.  In situ Polymerization Approach to Graphene-Reinforced Nylon-6 Composites , 2010 .

[34]  R. Gross,et al.  Citrate esters as plasticizers for poly(lactic acid) , 1997 .

[35]  H. Yano,et al.  The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites , 2009 .

[36]  V. Causin,et al.  Morphological and structural characterization of polypropylene/conductive graphite nanocomposites , 2006 .

[37]  L. Avérous,et al.  Poly(lactic acid): plasticization and properties of biodegradable multiphase systems , 2001 .

[38]  J. L. Willett,et al.  Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy , 2008 .

[39]  A. Galeski,et al.  Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol) , 2006 .

[40]  N. Ibrahim,et al.  Plasticized poly(lactic acid) with low molecular weight poly(ethylene glycol): Mechanical, thermal, and morphology properties , 2013 .

[41]  Jianfei Che,et al.  Preparation of Polylactide/Graphene Composites From Liquid-Phase Exfoliated Graphite Sheets , 2014 .