论文信息 - A capacitive-type humidity sensor using crosslinked poly(methyl methacrylate-co-(2 hydroxypropyl)-methacrylate)

A capacitive-type humidity sensor using crosslinked poly(methyl methacrylate-co-(2 hydroxypropyl)-methacrylate)

Abstract A capacitive-type humidity sensor has been manufactured using crosslinked poly(methyl methacrylate-co-(2 hydroxypropyl)-methacrylate) as sensing material. The sensitivity, response time and durability of the sensor against acetone vapour have been measured. The sensor is tested with a measurement cycle as follows: 12% RH (1 h)-75% RH (1 h)-95% RH (16 h)-75% RH 1 h)-12% (1 h), and it shows good sensitivity, short response time, low hysteresis and durability against acetone vapour.

[1] G. O. Nelson. Controlled test atmospheres;: Principles and techniques , 1971 .

[2] T. Seiyama,et al. Chemical sensor technology , 1988 .

[3] M. Matsuguchi,et al. A Humidity Sensor Using Cross‐linked Quaternized Polyvinylpyridine , 1989 .

[4] M. Matsuguchi,et al. A Humidity Sensor Using Polytetrafluoroethylene‐Graft‐Quaternized‐Polyvinylpyridine , 1991 .

[5] Yoshiro Sakai,et al. Optical humidity sensing characteristics of composite thin films of hydrolysed nafion-dye with a terminalN-phenyl group , 1992 .

[6] M. Matsuguchi,et al. Effect of Sorbed Water on the Dielectric Properties of Acetylene‐Terminated Polyimide Resins and Their Application to a Humidity Sensor , 1993 .

[7] K. Carr-Brion,et al. Moisture Sensors in Process Control , 1986 .

[8] P. McGeehin,et al. Solid-state gas sensors and monitors , 1984 .

[9] C. Hamann,et al. Gas and humidity sensors based on organic active thin films , 1990 .