An Inductive Link-Based Wireless Power Transfer System for Biomedical Applications

A wireless power transfer system using an inductive link has been demonstrated for implantable sensor applications. The system is composed of two primary blocks: an inductive power transfer unit and a backward data communication unit. The inductive link performs two functions: coupling the required power from a wireless power supply system enabling battery-less, long-term implant operation and providing a backward data transmission path. The backward data communication unit transmits the data to an outside reader using FSK modulation scheme via the inductive link. To demonstrate the operation of the inductive link, a board-level design has been implemented with high link efficiency. Test results from a fabricated sensor system, composed of a hybrid implementation of custom-integrated circuits and board-level discrete components, are presented demonstrating power transmission of 125 mW with a 12.5% power link transmission efficiency. Simultaneous backward data communication involving a digital pulse rate of up to 10 kbps was also observed.

[1]  E. Renard.  Implantable glucose sensors for diabetes monitoring , 2004, Minimally invasive therapy & allied technologies : MITAT : official journal of the Society for Minimally Invasive Therapy.

[2]  Mani Soma,et al.  Radio-Frequency Coils in Implantable Devices: Misalignment Analysis and Design Procedure , 1987, IEEE Transactions on Biomedical Engineering.

[3]  Joseph H. Schulman.  The Feasible FES System: Battery Powered BION Stimulator , 2008, Proceedings of the IEEE.

[4]  R Bashirullah,et al.  Wireless Implants , 2010, IEEE Microwave Magazine.

[5]  C. Zierhofer,et al.  Electronic design of a cochlear implant for multichannel high-rate pulsatile stimulation strategies , 1995 .

[6]  R. Puers,et al.  A Low Power Radio Telemetry Achieving Very High Data Rates at Biocompatible Frequencies , 2007, TRANSDUCERS 2007 - 2007 International Solid-State Sensors, Actuators and Microsystems Conference.

[7]  Nathan O. Sokal,et al.  Class of High-Efficiency Tuned Switching Power Amplifiers , 2009 .

[8]  W. Liu,et al.  A neuro-stimulus chip with telemetry unit for retinal prosthetic device , 2000, IEEE Journal of Solid-State Circuits.

[9]  W.J. Heetderks,et al.  RF powering of millimeter- and submillimeter-sized neural prosthetic implants , 1988, IEEE Transactions on Biomedical Engineering.

[10]  P.R. Troyk,et al.  Closed-loop class E transcutaneous power and data link for MicroImplants , 1992, IEEE Transactions on Biomedical Engineering.

[11]  Robert Puers,et al.  A telemetry system for the detection of hip prosthesis loosening by vibration analysis , 2000 .

[12]  Robert Puers,et al.  Wireless energy transfer for stand-alone systems: a comparison between low and high power applicability , 2001 .

[13]  Denis Flandre,et al.  A Self-Tuning Inductive Powering System for Biomedical Implants , 2011 .

[14]  Rahul Sarpeshkar,et al.  An ultra-low-power programmable analog bionic ear processor , 2005, IEEE Transactions on Biomedical Engineering.

[15]  Daryl R. Kipke,et al.  Wireless implantable microsystems: high-density electronic interfaces to the nervous system , 2004, Proceedings of the IEEE.

[16]  Robert Puers,et al.  An inductive power system with integrated bi-directional data-transmission , 2004 .

[17]  Mohammad Ahsanul Adeeb,et al.  A Class-E Inductive Powering Link with Backward Data Communications for Implantable Sensor Systems , 2006 .

[18]  W. Ko,et al.  Design of radio-frequency powered coils for implant instruments , 1977, Medical and Biological Engineering and Computing.

[19]  Pengfei Li,et al.  A Wireless Power Interface for Rechargeable Battery Operated Medical Implants , 2007, IEEE Transactions on Circuits and Systems II: Express Briefs.

[20]  Robert Puers,et al.  An inductive power link for a wireless endoscope. , 2007, Biosensors & bioelectronics.

[21]  Maysam Ghovanloo,et al.  A wideband frequency-shift keying wireless link for inductively powered biomedical implants , 2004, IEEE Transactions on Circuits and Systems I: Regular Papers.

[22]  Syed K. Islam,et al.  A low power sensor signal processing circuit for implantable biosensor applications , 2007 .

[23]  Gert Cauwenberghs,et al.  Power harvesting and telemetry in CMOS for implanted devices , 2004, IEEE Transactions on Circuits and Systems I: Regular Papers.

[24]  Gerard L. Coté,et al.  Emerging biomedical sensing technologies and their applications , 2003 .

[25]  Yan Guozheng,et al.  Power transmission for gastrointestinal microsystems using inductive coupling. , 2007, Physiological measurement.

[26]  A P Turner,et al.  Recent advances in amperometric glucose biosensors for in vivo monitoring. , 1995, Physiological measurement.

[27]  M. Ghovanloo,et al.  A Wireless Implantable Multichannel Microstimulating System-on-a-Chip With Modular Architecture , 2007, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[28]  Soumyajit Mandal,et al.  Circuits for an RF cochlea , 2006, 2006 IEEE International Symposium on Circuits and Systems.

[29]  John M. Osepchuk.  Biological Effects and Exposure Criteria for Radiofrequency Electromagnetic Fields. NCRP Report no. 86 , 1987 .

[30]  J. Weiland,et al.  Retinal Prosthesis , 2014, IEEE Transactions on Biomedical Engineering.

[31]  L. Wong,et al.  A very low power CMOS mixed-signal IC for implantable pacemaker applications , 2004, 2004 IEEE International Solid-State Circuits Conference (IEEE Cat. No.04CH37519).

[32]  D. Wenzel,et al.  Low power integrated pressure sensor system for medical applications , 1999 .

[33]  David Gough,et al.  A Continuous, Implantable Lactate Sensor , 1995 .