Hot corrosion behaviors of as-sprayed and laser-remelted YSZ thermal barrier coatings at 950 °C

[1]  L. Saucedo-Mora,et al.  Evaluation of a sealed layer on a porous thermal barrier coating against molten calcium–magnesium–alumina–silicate corrosion , 2021, Materials & Design.

[2]  A. C. Karaoglanli,et al.  Oxidation and hot corrosion resistance of HVOF/EB-PVD thermal barrier coating system , 2021 .

[3]  R. Swadźba,et al.  TEM investigations of TGO formation during cyclic oxidation in two- and three-layered Thermal Barrier Coatings produced using LPPS, CVD and PS-PVD methods , 2020 .

[4]  G. Vasconcelos,et al.  Study of the metallurgical bond between 316 steel substrates and NiCrAlY coating sprayed by HVOF and irradiated with a low power CO2 laser , 2019, Matéria.

[5]  Min Liu,et al.  Preparation of Al2O3 nanowires on 7YSZ thermal barrier coatings against CMAS corrosion , 2019, Transactions of Nonferrous Metals Society of China.

[6]  K. Yang,et al.  Effect of laser remelting on microstructure and wear resistance of plasma sprayed Al2O3-40%TiO2 coating , 2019, Wear.

[7]  Liang Wang,et al.  Laser remelting of plasma-sprayed nanostructured Al2O3–20 wt.% ZrO2 coatings onto 316L stainless steel , 2018 .

[8]  H. Liao,et al.  Ultrasonic cavitation erosion of as-sprayed and laser-remelted yttria stabilized zirconia coatings , 2017 .

[9]  A. C. Karaoglanli,et al.  Hot corrosion behavior of YSZ, Gd 2 Zr 2 O 7 and YSZ/Gd 2 Zr 2 O 7 thermal barrier coatings exposed to molten sulfate and vanadate salt , 2017 .

[10]  R. Vaßen,et al.  Ceramic Top Coats of Plasma-Sprayed Thermal Barrier Coatings: Materials, Processes, and Properties , 2017, Journal of Thermal Spray Technology.

[11]  H. Masjuki,et al.  Laser-based Surface Modifications of Aluminum and its Alloys , 2016 .

[12]  A. Akbari,et al.  Porosity and microstructural features of plasma sprayed Yttria stabilized Zirconia thermal barrier coatings , 2015 .

[13]  B. Demirel,et al.  Effect of shot peening on the oxidation behavior of thermal barrier coatings , 2015 .

[14]  W. Xu,et al.  Effect of Al-deposition on erosion resistance of plasma sprayed thermal barrier coating , 2015 .

[15]  Xiao-Tao Luo,et al.  A TEM Study of the Microstructure of Plasma-Sprayed YSZ Near Inter-splat Interfaces , 2015, Journal of Thermal Spray Technology.

[16]  Georg Mauer,et al.  Novel opportunities for thermal spray by PS-PVD , 2015 .

[17]  Lida Shen,et al.  Microstructural characterization of Al2O3–13 wt.% TiO2 ceramic coatings prepared by squash presetting laser cladding on GH4169 superalloy , 2014 .

[18]  J. Sieniawski,et al.  PS-PVD deposition of thermal barrier coatings , 2013 .

[19]  Yukihiro Sakamoto,et al.  Effects of initial oxidation on β phase depletion and oxidation of CoNiCrAlY bond coatings fabricated by warm spray and HVOF processes , 2013 .

[20]  L. Lorenzoni,et al.  Solid particle erosion of thermal spray and physical vapour deposition thermal barrier coatings , 2011 .

[21]  Robert Vassen,et al.  Recent Developments in the Field of Thermal Barrier Coatings , 2009 .

[22]  Manuel F. M. Costa,et al.  Morphological and microstructural characterization of laser-glazed plasma-sprayed thermal barrier coatings , 2006 .

[23]  S. Abbasi,et al.  The effect of platinum-aluminide coating features on high-temperature fatigue life of nickel-based superalloy Rene®80 , 2019, Journal of Mining and Metallurgy, Section B: Metallurgy.

[24]  Guifa Li,et al.  Derivative effect of laser cladding on interface stability of YSZ@Ni coating on GH4169 alloy: An experimental and theoretical study , 2018 .

[25]  A. C. Karaoglanli,et al.  State of the Art Thermal Barrier Coating (TBC) Materials and TBC Failure Mechanisms , 2017 .