The influence of contact modelling on simulated wheel/rail interaction due to wheel flats

Most available wheel/rail interaction models for the prediction of impact forces caused by wheel flats use a Hertzian spring as contact model and do not account for the changes in contact stiffness due to the real three-dimensional wheel flat geometry. In the literature, only little information is available on how this common simplification influences the calculation results. The aim of this paper is to study the influence of contact modelling on simulated impact forces due to wheel flats in order to determine the errors introduced by simplified approaches. For this purpose, the dynamic wheel/rail interaction is investigated with a time-domain model including a three-dimensional (3D) non-Hertzian contact model based on Kalker's variational method. The simulation results are compared with results obtained using a two-dimensional (2D) non-Hertzian contact model consisting of a Winkler bedding of independent springs or alternatively a single non-linear Hertzian contact spring. The relative displacement input to the Hertzian model is either the wheel profile deviation due to the wheel flat or the pre-calculated vertical wheel centre trajectory. Both the 2D model and the Hertzian spring with the wheel centre trajectory as input give rather similar results to the 3D model, the former having the tendency to slightly underestimate the maximum impact force and the latter to slightly overestimate. The Hertzian model with the wheel profile deviation as input can however lead to large errors in the result. Leaving aside this contact model, the correct modelling of the longitudinal geometry of the wheel flat is actually seen to have a larger influence on the maximum impact force than the choice of contact model.

[1]  Jens C. O. Nielsen,et al.  Out-of-round railway wheels—wheel-rail contact forces and track response derived from field tests and numerical simulations , 2003 .

[2]  Wolfgang Kropp,et al.  A Time-Domain Model for Coupled Vertical and Tangential Wheel/Rail Interaction - A Contribution to the Modelling of Curve Squeal , 2012 .

[3]  David Thompson,et al.  Investigation of the dynamic contact filter effect in vertical wheel/rail interaction using a 2D and a 3D non-Hertzian contact model , 2011 .

[4]  Luis Baeza,et al.  Railway Train-Track Dynamics for Wheelflats with Improved Contact Models , 2006 .

[5]  Michaël J.M.M. Steenbergen,et al.  The role of the contact geometry in wheel–rail impact due to wheel flats: Part II , 2007 .

[6]  Ross A. Clark,et al.  An Investigation into the Dynamic Effects on the Track of Wheelflats on Railway Vehicles , 1979 .

[7]  J. Nielsen.  High-frequency vertical wheel-rail contact forces-Validation of a prediction model by field testing , 2008 .

[8]  J. Vinolas,et al.  A Time Domain Wheelflat/Track FE Model , 2006 .

[9]  A. Nordborg.  Wheel/rail noise generation due to nonlinear effects and parametric excitation. , 2002, The Journal of the Acoustical Society of America.

[10]  Johan Jergeus.  Railway Wheel Flats. Martensite Formation, Residual Stresses, and Crack Propagation , 1998 .

[11]  I. L. Vér,et al.  Wheel/rail noise—Part III: Impact noise generation by wheel and rail discontinuities , 1976 .

[12]  Rao V. Dukkipati,et al.  Impact Loads due to Wheel Flats and Shells , 1999 .

[13]  Astrid Pieringer,et al.  Time-domain modelling of high-frequency wheel/rail interaction , 2011 .

[14]  K. Johnson,et al.  Three-Dimensional Elastic Bodies in Rolling Contact , 1990 .

[15]  Jens C. O. Nielsen,et al.  VERTICAL DYNAMIC INTERACTION BETWEEN TRAIN AND TRACK INFLUENCE OF WHEEL AND TRACK IMPERFECTIONS , 1995 .

[16]  Xuesong Jin,et al.  Contact-impact stress analysis of rail joint region using the dynamic finite element method , 2005 .

[17]  Jonas W. Ringsberg,et al.  Influence of railway wheel flat impact on crack growth in rails , 2005 .

[18]  Rolf Dollevoet,et al.  Differential wear and plastic deformation as causes of squat at track local stiffness change combined with other track short defects , 2008 .

[19]  Klaus Knothe,et al.  Modelling of Railway Track and Vehicle/Track Interaction at High Frequencies , 1993 .

[20]  Chris Jones,et al.  A REVIEW OF THE MODELLING OF WHEEL/RAIL NOISE GENERATION , 2000 .

[21]  Subhash Rakheja,et al.  An Adaptive Contact Model for Simulation of Wheel-rail Impact Load due to a Wheel Flat , 2007 .

[22]  T. X. Wu,et al.  A hybrid model for the noise generation due to railway wheel flats , 2002 .

[23]  Zili Li,et al.  Wheel–rail impact and the dynamic forces at discrete supports of rails in the presence of singular rail surface defects , 2012 .

[24]  R.A.J. Ford,et al.  Simplified contact filters in wheel/rail noise prediction , 2006 .