Spray Dried Formulations for Inhalation—Meaningful Characterisation of Powder Properties

Spray drying as a particle engineering technique is of increasing interest in the field of inhalation and is already being utilised e.g., for the PulmoSphereTM products. As spray dried particles tend to agglomerate and are mechanically instable, low dose filling processes can be difficult. This study correlates powder flowability tests of spray dried formulations with filling processes with drum and dosator systems. Four pulmonary and four nasal powders with different characteristics in terms of shape, composition, and surface polarity were prepared and characterised for powder flowability according to Ph. Eur. and by powder rheometry. All formulations were filled with a manual drum TT and a dosator system. The classical flowability tests according to the Ph. Eur. showed a bad flow behaviour for hydrophilic pulmonary powders (x50 ~ 3 µm), whereas hydrophobic pulmonary particles and nasal particles (x50 ~ 25 µm) showed a better flowing behaviour. Powder rheometry supports this finding but can better differentiate flow behaviours.

[1]  Danforth P Miller,et al.  Spray-Dried PulmoSphere™ Formulations for Inhalation Comprising Crystalline Drug Particles , 2019, AAPS PharmSciTech.

[2]  I. Larson,et al.  Relationship between surface concentration of L-leucine and bulk powder properties in spray dried formulations. , 2015, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[3]  Marcos Llusa,et al.  Low-dose capsule filling of inhalation products: critical material attributes and process parameters. , 2014, International journal of pharmaceutics.

[4]  J. Weers,et al.  Development of an inhaled dry-powder formulation of tobramycin using PulmoSphere™ technology. , 2011, Journal of aerosol medicine and pulmonary drug delivery.

[5]  K. Amighi,et al.  Formulation strategy and use of excipients in pulmonary drug delivery. , 2010, International journal of pharmaceutics.

[6]  E. Cevher,et al.  Nasal Delivery of High Molecular Weight Drugs , 2009, Molecules.

[7]  Diego Barletta,et al.  Arch-Free flow in aerated silo discharge of cohesive powders , 2009 .

[8]  Reinhard Vehring,et al.  Pharmaceutical Particle Engineering via Spray Drying , 2007, Pharmaceutical Research.

[9]  Reinhard Vehring,et al.  Particle formation in spray drying , 2007 .

[10]  C. Stevenson,et al.  The design and performance of the exubera pulmonary insulin delivery system. , 2007, Diabetes technology & therapeutics.

[11]  Reg Freeman,et al.  Measuring the flow properties of consolidated, conditioned and aerated powders — A comparative study using a powder rheometer and a rotational shear cell , 2007 .

[12]  Gregory W. Sluggett,et al.  EXUBERA: pharmaceutical development of a novel product for pulmonary delivery of insulin. , 2005, Diabetes technology & therapeutics.

[13]  J. Kuo,et al.  Liposomes and disaccharides as carriers in spray-dried powder formulations of superoxide dismutase. , 2004, Journal of controlled release : official journal of the Controlled Release Society.

[14]  Jm Newton,et al.  Powder flowability as an indication of capsule filling performance , 1990 .