Low power sharpened comb decimation filter

This paper presents the design of the low power comb-based decimation filter with the following characteristics: a low wideband pass band droop and a high stop band attenuation of the overall filter. Low power consumption is achieved by multiplier less design and eliminating filtering at high input rate. To this end the decimation is split into two stages with the cascaded less order comb filters at each stage. The first stage is implemented in non recursive form and the polyphase decomposition is applied to this stage to avoid the filtering at the high input rate. Two simple compensation filters which work at a low rate are introduced. The sharpening technique is applied in the second stage to the cascade of comb filter and the compensation filter.

[1]  Gordana Jovanovic-Dolecek.  Multirate Systems: Design and Applications , 2001 .

[2]  Sanjit K. Mitra,et al.  Simple method for compensation of CIC decimation filter , 2008 .

[3]  E. Hogenauer,et al.  An economical class of digital filters for decimation and interpolation , 1981 .

[4]  Sanjit K. Mitra,et al.  A New Multistage Comb-Modified Rotated Sinc (RS) Decimator with Sharpened Magnitude Response , 2005, IEICE Trans. Inf. Syst..

[5]  Alan N. Willson,et al.  Application of filter sharpening to cascaded integrator-comb decimation filters , 1997, IEEE Trans. Signal Process..

[6]  Fredric J. Harris,et al.  Multirate Signal Processing for Communication Systems , 2004 .

[7]  H. Aboushady,et al.  Efficient polyphase decomposition of comb decimation filters in /spl Sigma//spl utri/ analog-to-digital converters , 2001 .

[8]  Fred Harris,et al.  On design of two-stage CIC compensation filter , 2009, 2009 IEEE International Symposium on Industrial Electronics.

[9]  Erwin Ofner,et al.  Low Power Non-Recursive Decimation Filters , 2007, 2007 14th IEEE International Conference on Electronics, Circuits and Systems.

[10]  Letizia Lo Presti,et al.  Efficient modified-sinc filters for sigma-delta A/D converters , 2000 .

[11]  M. Laddomada.  Generalized Comb Decimation Filters for $\Sigma\Delta$ A/D Converters: Analysis and Design , 2007, IEEE Transactions on Circuits and Systems I: Regular Papers.

[12]  L. Lo Presti,et al.  An efficient decimation sinc-filter design for software radio applications , 2001, 2001 IEEE Third Workshop on Signal Processing Advances in Wireless Communications (SPAWC'01). Workshop Proceedings (Cat. No.01EX471).

[13]  Seongdo Kim,et al.  Design of CIC roll-off compensation filter in a W-CDMA digital IF receiver , 2006, Digit. Signal Process..

[14]  L. Lo Presti,et al.  Efficient antialiasing decimation filter for /spl Delta//spl Sigma/ converters , 1998, 1998 IEEE International Conference on Electronics, Circuits and Systems. Surfing the Waves of Science and Technology (Cat. No.98EX196).

[15]  G. Jovanovic Dolecek.  Simple wideband CIC compensator , 2009 .

[16]  Gordana Jovanovic-Dolecek,et al.  Design of wideband CIC compensator filter for a digital IF receiver , 2009, Digit. Signal Process..

[17]  Shing-Chow Chan,et al.  The design and multiplier-less realization of software radio receivers with reduced system delay , 2004, IEEE Transactions on Circuits and Systems I: Regular Papers.

[18]  Sanjit K. Mitra,et al.  A new two-stage sharpened comb decimator , 2005, IEEE Transactions on Circuits and Systems I: Regular Papers.

[19]  J. Kaiser,et al.  Sharpening the response of a symmetric nonrecursive filter by multiple use of the same filter , 1977 .

[20]  G. J. Dolecek,et al.  A General Method to Design GCF Compensation Filter , 2009 .

[21]  H. Tenhunen,et al.  A Comparison Design of Comb Decimators for Sigma-Delta Analog-to-Digital Converters , 2000 .