Ultrasensitive MWCNT/PDMS composite strain sensor fabricated by laser ablation process

[1]  Caofeng Pan,et al.  Stretchable conductive nonwoven fabrics with self-cleaning capability for tunable wearable strain sensor , 2019 .

[2]  Changyu Shen,et al.  Highly Compressible and Robust Polyimide/Carbon Nanotube Composite Aerogel for High-Performance Wearable Pressure Sensor. , 2019, ACS applied materials & interfaces.

[3]  H. Ning,et al.  Highly Compressible and Sensitive Pressure Sensor under Large Strain Based on 3D Porous Reduced Graphene Oxide Fiber Fabrics in Wide Compression Strains. , 2019, ACS applied materials & interfaces.

[4]  Changyu Shen,et al.  Superhydrophobic Electrically Conductive Paper for Ultrasensitive Strain Sensor with Excellent Anticorrosion and Self-Cleaning Property. , 2019, ACS applied materials & interfaces.

[5]  N. Hu,et al.  Synergistic effect of CB and MWCNT on the strain-induced DC and AC electrical properties of PVDF-HFP composites , 2019, Carbon.

[6]  Changyu Shen,et al.  Ultrasensitive and Highly Compressible Piezoresistive Sensor Based on Polyurethane Sponge Coated with a Cracked Cellulose Nanofibril/Silver Nanowire Layer. , 2019, ACS applied materials & interfaces.

[7]  Qingting Liu,et al.  Highly flexible strain sensors based on polydimethylsiloxane/carbon nanotubes (CNTs) prepared by a swelling/permeating method and enhanced sensitivity by CNTs surface modification , 2019, Composites Science and Technology.

[8]  Changyu Shen,et al.  Electrically conductive carbon black/electrospun polyamide 6/poly(vinyl alcohol) composite based strain sensor with ultrahigh sensitivity and favorable repeatability , 2019, Materials Letters.

[9]  Qiu Jiang,et al.  Laser-derived graphene: A three-dimensional printed graphene electrode and its emerging applications , 2019, Nano Today.

[10]  Z. Pan,et al.  Flexible strain sensors fabricated using carbon-based nanomaterials: A review , 2018, Current Opinion in Solid State and Materials Science.

[11]  Kun Dai,et al.  Electrically conductive polymer composites for smart flexible strain sensors: a critical review , 2018 .

[12]  D. Bhattacharyya,et al.  Wearable strain sensors based on electrically conductive natural fiber yarns , 2018, Materials & Design.

[13]  Yuan Weifeng,et al.  A fabrication process to make CNT/EP composite strain sensors , 2018 .

[14]  Helen J. Huang,et al.  Highly Stretchable and Wearable Strain Sensor Based on Printable Carbon Nanotube Layers/Polydimethylsiloxane Composites with Adjustable Sensitivity. , 2018, ACS applied materials & interfaces.

[15]  Jae-Won Seo,et al.  Simple and cost-effective method of highly conductive and elastic carbon nanotube/polydimethylsiloxane composite for wearable electronics , 2018, Scientific Reports.

[16]  Yanbo Yao,et al.  A Route toward Ultrasensitive Layered Carbon Based Piezoresistive Sensors through Hierarchical Contact Design. , 2017, ACS applied materials & interfaces.

[17]  A. Ravindran,et al.  Novel Electrically Conductive Porous PDMS/Carbon Nanofiber Composites for Deformable Strain Sensors and Conductors. , 2017, ACS applied materials & interfaces.

[18]  Changyu Shen,et al.  Strain sensing behaviors of epoxy nanocomposites with carbon nanotubes under cyclic deformation , 2017 .

[19]  J. Sparkman,et al.  Strain sensing of printed carbon nanotube sensors on polyurethane substrate with spray deposition modeling , 2017 .

[20]  S. Chang,et al.  Microfluidic capacitive sensors with ionic liquid electrodes and CNT/PDMS nanocomposites for simultaneous sensing of pressure and temperature , 2017 .

[21]  Chen-zhong Li,et al.  Mechanical and electrochemical characterization of CNT/PDMS composited soft and stretchable electrodes fabricated by an efficient solution-based fabrication method , 2016 .

[22]  Sung-Hoon Park,et al.  Resistance Complemented Carbon-Nanotube Composite for Laser Printer Fusers Element , 2016, IEEE Electron Device Letters.

[23]  Jianyu Zhang,et al.  Conductive PVDF-HFP/CNT composites for strain sensing , 2016 .

[24]  M. El‐Kady,et al.  Direct laser writing of graphene electronics. , 2014, ACS nano.

[25]  I. Park,et al.  Highly stretchable and sensitive strain sensor based on silver nanowire-elastomer nanocomposite. , 2014, ACS nano.

[26]  T. Ren,et al.  Scalable fabrication of high-performance and flexible graphene strain sensors. , 2014, Nanoscale.

[27]  E. Meng,et al.  High strain biocompatible polydimethylsiloxane-based conductive graphene and multiwalled carbon nanotube nanocomposite strain sensors , 2013 .

[28]  Qiang Fu,et al.  Strain sensing behaviour of elastomeric composite films containing carbon nanotubes under cyclic loading , 2013 .

[29]  Senentxu Lanceros-Méndez,et al.  Electromechanical performance of poly(vinylidene fluoride)/carbon nanotube composites for strain sensor applications , 2012 .

[30]  Yong‐Lai Zhang,et al.  Two-beam-laser interference mediated reduction, patterning and nanostructuring of graphene oxide for the production of a flexible humidity sensing device , 2012 .

[31]  M. El‐Kady,et al.  Laser Scribing of High-Performance and Flexible Graphene-Based Electrochemical Capacitors , 2012, Science.

[32]  B. H. Weiller,et al.  Patterning and electronic tuning of laser scribed graphene for flexible all-carbon devices. , 2012, ACS nano.

[33]  F. Avilés,et al.  Electrical and piezoresistive properties of multi-walled carbon nanotube/polymer composite films aligned by an electric field , 2011 .

[34]  H. Fukunaga,et al.  A carbon nanotube/polymer strain sensor with linear and anti-symmetric piezoresistivity , 2011 .

[35]  K. Schulte,et al.  Piezoresistive response of epoxy composites with carbon nanoparticles under tensile load , 2009 .

[36]  Ji Liang,et al.  X-ray diffraction characterization on the alignment degree of carbon nanotubes , 2001 .

[37]  J. Simmons.  Generalized Formula for the Electric Tunnel Effect between Similar Electrodes Separated by a Thin Insulating Film , 1963 .

[38]  Kai Wang,et al.  A novel strain sensor based on graphene composite films with layered structure , 2016 .

[39]  Sida Luo,et al.  Direct laser writing for creating porous graphitic structures and their use for flexible and highly sensitive sensor and sensor arrays , 2016 .

[40]  J. Xue,et al.  Ultrasensitive strain sensors made from metal-coated carbon nanofiller/epoxy composites , 2013 .

[41]  Hui-Ming Cheng,et al.  The present status and key problems of carbon nanotube based polymer composites , 2007 .