Investigation of energy absorption performances of a 3D printed fiber-reinforced bio-inspired cellular structure under in-plane compression loading

[1]  B. Gunji,et al.  An experimental and numerical investigation on the performance of novel hybrid bio-inspired 3D printed lattice structures for stiffness and energy absorption applications , 2023, Mechanics of Advanced Materials and Structures.

[2]  Pengpeng Shao,et al.  3D printing of architectured epoxy-based composite lattices with exceptional strength and toughness , 2023, Composites Part B: Engineering.

[3]  Luquan Ren,et al.  Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications , 2023, Composites Part B: Engineering.

[4]  Yuansheng Cheng,et al.  Mechanical characteristics and foam filling enhancement mechanism of polymeric periodic hybrid structures under uniaxial compression , 2023, Materials & Design.

[5]  A. Farrokhabadi,et al.  Introducing a new hybrid surface strut-based lattice structure with enhanced energy absorption capacity , 2023, Mechanics of Advanced Materials and Structures.

[6]  G. Gómez-Gras,et al.  Mechanical performance of additively manufactured three-dimensional lightweight cellular solids: experimental and numerical analysis , 2023, Materials & Design.

[7]  A. Farrokhabadi,et al.  Investigation of the equivalent mechanical properties of the bone-inspired composite cellular structure: Analytical, numerical and experimental approaches , 2023, Composite Structures.

[8]  Y. Yamauchi,et al.  Effects of Random and Controlled Irregularity in Strut Lattice Structure of PA12 on Compression Anisotropy , 2023, Additive Manufacturing.

[9]  Zafer Kazancı,et al.  Energy Absorption Enhancement of Additively Manufactured Hexagonal and Re-Entrant (Auxetic) Lattice Structures by Using Multi-Material Reinforcements , 2022, SSRN Electronic Journal.

[10]  Yongshui Lin,et al.  Mechanical properties of a novel two-phase hybrid plate-lattice metamaterial , 2022, Mechanics of Advanced Materials and Structures.

[11]  Zhonggang Wang,et al.  Effect of geometric configuration on compression behavior of 3D-printed polymeric triply periodic minimal surface sheets , 2022, Mechanics of Advanced Materials and Structures.

[12]  Bangzheng Li,et al.  Mechanical properties and energy absorption performance of bio-inspired dual architecture phase lattice structures , 2022, Mechanics of Advanced Materials and Structures.

[13]  G. Lu,et al.  Mechanical properties and energy absorption of bio-inspired hierarchical circular honeycomb , 2022, Composites Part B: Engineering.

[14]  A. Farrokhabadi,et al.  Investigation of the energy absorption capacity of foam-filled 3D-printed glass fiber reinforced thermoplastic auxetic honeycomb structures , 2022, Mechanics of Advanced Materials and Structures.

[15]  A. Farrokhabadi,et al.  Introducing the new lattice structure based on the representative element double octagonal bipyramid , 2022, Aerospace Science and Technology.

[16]  A. Farrokhabadi,et al.  Design and characterization of an orthotropic accordion cellular honeycomb as one-dimensional morphing structures with enhanced properties , 2022, Journal of Sandwich Structures & Materials.

[17]  A. Remennikov,et al.  Multi-scale characterization of novel re-entrant circular auxetic honeycombs under quasi-static crushing , 2021, Thin-Walled Structures.

[18]  L. Bai,et al.  Improved mechanical properties and energy absorption of Ti6Al4V laser powder bed fusion lattice structures using curving lattice struts , 2021, Materials & Design.

[19]  A. Farrokhabadi,et al.  Evaluation of the equivalent mechanical properties in a novel composite cruciform honeycomb using analytical and numerical methods , 2021 .

[20]  Guilherme Antônio Oliver,et al.  A review on the energy absorption response and structural applications of auxetic structures , 2021, Mechanics of Advanced Materials and Structures.

[21]  A. Farrokhabadi,et al.  Experimental and Analytical Studies of Mechanical Properties of Additively Manufactured Lattice Structure Based on Octagonal Bipyramid Cubic Unit Cell , 2021, Additive Manufacturing.

[22]  R. Miralbés,et al.  Mechanical properties and energy–absorption capabilities of thermoplastic sheet gyroid structures , 2021, Mechanics of Advanced Materials and Structures.

[23]  A. Zolfagharian,et al.  Energy Absorption and Mechanical Performance of Functionally Graded Soft–Hard Lattice Structures , 2021, Materials.

[24]  Q. Qin,et al.  3D printing of chiral carbon fiber reinforced polylactic acid composites with negative Poisson's ratios , 2020 .

[25]  D. Fang,et al.  In-plane compression behavior of hybrid honeycomb metastructures: Theoretical and experimental studies , 2020 .

[26]  A. Farrokhabadi,et al.  Investigation of the equivalent material properties and failure stress of the re-entrant composite lattice structures using an analytical model , 2020 .

[27]  T. Ngo,et al.  Uncovering a high-performance bio-mimetic cellular structure from trabecular bone , 2020, Scientific Reports.

[28]  T. Ngo,et al.  Performance of a 3D printed cellular structure inspired by bone , 2020, Thin-Walled Structures.

[29]  Qi Zhang,et al.  3d printed continuous fiber reinforced composite auxetic honeycomb structures , 2020 .

[30]  J. Plocher,et al.  Effect of density and unit cell size grading on the stiffness and energy absorption of short fibre-reinforced functionally graded lattice structures , 2020 .

[31]  Cecilia D. Treviño-Quintanilla,et al.  Elastic response of lattice arc structures fabricated using curved-layered fused deposition modeling , 2019, Mechanics of Advanced Materials and Structures.

[32]  Wenfeng Hao,et al.  Failure analysis of 3D printed glass fiber/PA12 composite lattice structures using DIC , 2019, Composite Structures.

[33]  C. Yi,et al.  Effective Design of the Graded Strut of BCC Lattice Structure for Improving Mechanical Properties , 2019, Materials.

[34]  D. Xiao,et al.  Impact energy absorption performances of ordinary and hierarchical chiral structures , 2019, Thin-Walled Structures.

[35]  R. Asmatulu,et al.  Adhesiveless honeycomb sandwich structures of prepreg carbon fiber composites for primary structural applications , 2019, Advanced Composites and Hybrid Materials.

[36]  Tongxi Yu,et al.  Crushing resistance and energy absorption of pomelo peel inspired hierarchical honeycomb , 2019, International Journal of Impact Engineering.

[37]  Arvin Bagheri Saed,et al.  Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer , 2018, Journal of Reinforced Plastics and Composites.

[38]  Li Ma,et al.  The manufacture and characterization of composite three-dimensional re-entrant auxetic cellular structures made from carbon fiber reinforced polymer , 2018 .

[39]  Qingguo Fei,et al.  In–plane dynamic crushing behavior and energy absorption of honeycombs with a novel type of multi-cells , 2017 .

[40]  Ayou Hao,et al.  Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement , 2017 .

[41]  Qinghai Bai,et al.  Analysis of Particle Swarm Optimization Algorithm , 2010, Comput. Inf. Sci..

[42]  Lei Liu,et al.  Particle swarm optimization algorithm: an overview , 2017, Soft Computing.

[43]  Y. Duan,et al.  Nacre-inspired design of CFRP composite for improved energy absorption properties , 2018 .