Indoor Localization of Passive UHF RFID Tags Based on Phase-of-Arrival Evaluation

This paper introduces a two-dimensional localization system for passive UHF RFID transponders based on phase-of-arrival evaluation of the backscattered tag signal. A multiple-channel system, where alternately one path is configured as a transmitter and the remaining paths work as receivers, is used to permit the position estimation. To improve localization accuracy and reduce disturbances caused by multipath propagation, a frequency-stepped continuous-waveform approach is employed. To achieve proof of concept, a local position measurement system demonstrator comprising an RFID reader, passive EPC Gen 2 RFID tags, several transceivers, baseband hardware, and signal processing was used for measurements. The results show excellent localization accuracy, even in an indoor environment.

[1]  Yunhao Liu,et al.  LANDMARC: Indoor Location Sensing Using Active RFID , 2004, Proceedings of the First IEEE International Conference on Pervasive Computing and Communications, 2003. (PerCom 2003)..

[2]  M. Vossiek,et al.  A new technology for precise local position measurement - LPM , 2004, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535).

[3]  Ramez Elmasri,et al.  Localization Systems Using Passive UHF RFID , 2009, 2009 Fifth International Joint Conference on INC, IMS and IDC.

[4]  Moeness G. Amin,et al.  Multifrequency-based range estimation of RFID Tags , 2009, 2009 IEEE International Conference on RFID.

[5]  Robert Weigel,et al.  Local positioning with passive UHF RFID transponders , 2009, 2009 IEEE MTT-S International Microwave Workshop on Wireless Sensing, Local Positioning, and RFID.

[6]  K. V. S. Rao,et al.  Phase based spatial identification of UHF RFID tags , 2010, 2010 IEEE International Conference on RFID (IEEE RFID 2010).

[7]  Robert Weigel,et al.  Distance measurement with UHF transponders by means of modulated backscattering , 2010, 2010 Conference Proceedings ICECom, 20th International Conference on Applied Electromagnetics and Communications.

[8]  Xiuwen Liu,et al.  Accurate localization of RFID tags using phase difference , 2010, 2010 IEEE International Conference on RFID (IEEE RFID 2010).

[9]  Lingfei Mo,et al.  Two-dimension localization of passive RFID tags using AOA estimation , 2011, 2011 IEEE International Instrumentation and Measurement Technology Conference.

[10]  Markus Cremer,et al.  Improved AoA based localization of UHF RFID tags using spatial diversity , 2011, 2011 IEEE International Conference on RFID-Technologies and Applications.

[11]  Ales Povalac,et al.  Phase difference of arrival distance estimation for RFID tags in frequency domain , 2011, 2011 IEEE International Conference on RFID-Technologies and Applications.

[12]  Gang Li,et al.  Where is the Tag? , 2011, IEEE Microwave Magazine.

[13]  Markus Cremer,et al.  UHF RFID localization system based on a phased array antenna , 2011, 2011 IEEE International Symposium on Antennas and Propagation (APSURSI).

[14]  Martin Vossiek,et al.  UHF RFID Localization Based on Synthetic Apertures , 2013, IEEE Transactions on Automation Science and Engineering.

[15]  M. Vossiek,et al.  Inverse SAR approach for localization of moving RFID tags , 2013, 2013 IEEE International Conference on RFID (RFID).

[16]  Andreas Stelzer,et al.  Phase-of-arrival-based localization of passive UHF RFID tags , 2013, 2013 IEEE MTT-S International Microwave Symposium Digest (MTT).