Voltage-frequency control of a self-excited induction generator

A new strategy for controlling voltage and frequency of a self excited induction generator (SEIG) is presented. The SEIG operates in the linear region of the core magnetizing curve, so that efficiency and performance are upgraded. An external excitation circuit, comprising permanently connected capacitors and electronically switched inductances is used. The external circuit allows to compensate for the generator reactive demand. A detailed analysis is performed, showing some salient aspects related to the connection of the external excitation circuit on the control performance. Asynchronous switching is used, but some important considerations must be taken into account related to the instantaneous phase angle between stator voltage and external inductor current at the switching instant, if good transient response is desired. Sliding mode controllers are proposed, showing good dynamic response and robust behavior upon changes in load and generator parameters. Computer simulations are used to demonstrate the validity of the proposed scheme.

[1]  Vadim I. Utkin,et al.  Sliding mode control design principles and applications to electric drives , 1993, IEEE Trans. Ind. Electron..

[2]  Hsin-Jang Shieh,et al.  A new switching surface sliding-mode speed control for induction motor drive systems , 1996 .

[3]  Vadim I. Utkin,et al.  Sliding Modes in Control and Optimization , 1992, Communications and Control Engineering Series.

[4]  Fang Zheng Peng,et al.  Dynamic performance and control of a static VAr generator using cascade multilevel inverters , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[5]  Bhim Singh,et al.  Transient performance of the self regulated short shunt self excited induction generator , 1995 .

[6]  M. B. Brennen,et al.  Static Exciters for Induction Generators , 1977, IEEE Transactions on Industry Applications.

[7]  T. F. Chan,et al.  Capacitance requirements of self-excited induction generators , 1993 .

[8]  V. Utkin.  Variable structure systems with sliding modes , 1977 .

[9]  S.S. Yegna Narayanan,et al.  Contributions to the Steady State Analysis of Wind-Turbine Driver Self-Excited Induction Generators , 1986, IEEE Transactions on Energy Conversion.

[10]  T. F. Chan,et al.  Self-excited induction generators driven by regulated and unregulated turbines , 1996 .

[11]  N. Malik,et al.  Steady State Analysis and Performance of an Isolated Self-Excited Induction Generator , 1986, IEEE Transactions on Energy Conversion.

[12]  P.C. Sen,et al.  Control dynamics of speed drive systems using sliding mode controllers with integral compensation , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[13]  Phoivos D. Ziogas,et al.  Analysis and design of a three-phase current source solid-state VAR compensator , 1989 .

[14]  John Y. Hung,et al.  Variable structure control: a survey , 1993, IEEE Trans. Ind. Electron..

[15]  Carlos H. Muravchik,et al.  Variable structure rotor flux observer for a self-excited induction generator , 1997 .

[16]  Olorunfemi Ojo.  Minimum airgap flux linkage requirement for self-excitation in stand-alone induction generators , 1995 .

[17]  Olorunfemi Ojo.  Performance of self-excited single-phase induction generators with shunt, short-shunt and long-shunt excitation connections , 1996 .

[18]  Paul C. Krause,et al.  Analysis of electric machinery , 1987 .

[19]  Asif Sabanovic,et al.  Application of Sliding Modes to Induction Motor Control , 1981, IEEE Transactions on Industry Applications.

[20]  R. H. Oppermann.  Theory of alternating-current machinery: by Alexander S. Langsdorf. First edition, 788 pages, illustrations, 16 × 23.5 cms. New York, McGraw-Hill Book Company, Inc., 1937.Price $6.00 , 1937 .