Finite element modeling of single-walled carbon nanotubes

Abstract A three-dimensional finite element (FE) model for armchair, zigzag and chiral single-walled carbon nanotubes (SWCNTs) is proposed. The model development is based on the assumption that carbon nanotubes, when subjected to loading, behave like space-frame structures. The bonds between carbon atoms are considered as connecting load-carrying members, while the carbon atoms as joints of the members. To create the FE models, nodes are placed at the locations of carbon atoms and the bonds between them are modeled using three-dimensional elastic beam elements. The elastic moduli of beam elements are determined by using a linkage between molecular and continuum mechanics. In order to evaluate the FE model and demonstrate its performance, the influence of tube wall thickness, diameter and chirality on the elastic moduli (Young's modulus and shear modulus) of SWCNTs is investigated. The investigation includes armchair, zigzag and chiral SWCNTs. It is found that the choice of wall thickness significantly affects the calculation of Young's modulus. For the values of wall thickness used in the literature, the obtained values of Young's modulus agree very well with the corresponding theoretical results and many experimental measurements. Dependence of elastic moduli to diameter and chirality of the nanotubes is also obtained. With increased tube diameter, the elastic moduli of the SWCNTs increase. The Young's modulus of chiral SWCNTs is found to be larger than that of armchair and zigzag SWCNTs. The presented results demonstrate that the proposed FE model may provide a valuable tool for studying the mechanical behavior of carbon nanotubes and their integration in nano-composites.

[1]  Tsu-Wei Chou,et al.  Elastic moduli of multi-walled carbon nanotubes and the effect of van der Waals forces , 2003 .

[2]  J. Bernholc,et al.  Nanomechanics of carbon tubes: Instabilities beyond linear response. , 1996, Physical review letters.

[3]  William L. Jorgensen,et al.  Aromatic-aromatic interactions: free energy profiles for the benzene dimer in water, chloroform, and liquid benzene , 1990 .

[4]  David Hui,et al.  Effectiveness of using carbon nanotubes as nano-reinforcements for advanced composite structures , 2002 .

[5]  Elizabeth C. Dickey,et al.  Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites , 2000 .

[6]  J. Lu,et al.  Elastic Properties of Carbon Nanotubes and Nanoropes , 1997, cond-mat/9704219.

[7]  Xin-Lin Gao,et al.  Finite deformation continuum model for single-walled carbon nanotubes , 2003 .

[8]  Bruce R. Gelin,et al.  Molecular modeling of polymer structures and properties , 1994 .

[9]  Boris I. Yakobson,et al.  C2F, BN, AND C NANOSHELL ELASTICITY FROM AB INITIO COMPUTATIONS , 2001 .

[10]  Dong Qian,et al.  Mechanical properties of carbon nanotubes: theoretical predictions and experimental measurements , 2003 .

[11]  Mary C. Boyce,et al.  Mechanics of deformation of single- and multi-wall carbon nanotubes , 2004 .

[12]  Tersoff.  Energies of fullerenes. , 1992, Physical review. B, Condensed matter.

[13]  W. Goddard,et al.  UFF, a full periodic table force field for molecular mechanics and molecular dynamics simulations , 1992 .

[14]  C. Ru,et al.  Elastic buckling of single-walled carbon nanotube ropes under high pressure , 2000 .

[15]  A. Maiti,et al.  Structural flexibility of carbon nanotubes , 1996 .

[16]  Chunyu Li,et al.  A STRUCTURAL MECHANICS APPROACH FOR THE ANALYSIS OF CARBON NANOTUBES , 2003 .

[17]  David Hui,et al.  On the effective elastic moduli of carbon nanotubes for nanocomposite structures , 2004 .

[18]  Z. C. Tu,et al.  Single-walled and multiwalled carbon nanotubes viewed as elastic tubes with the effective Young's moduli dependent on layer number , 2001, cond-mat/0112454.

[19]  S. Iijima.  Helical microtubules of graphitic carbon , 1991, Nature.

[20]  Zhou Jianjun,et al.  STRAIN ENERGY AND YOUNG'S MODULUS OF SINGLE-WALL CARBON NANOTUBES CALCULATED FROM ELECTRONIC ENERGY-BAND THEORY , 2000 .

[21]  Boris I. Yakobson,et al.  High strain rate fracture and C-chain unraveling in carbon nanotubes , 1997 .

[22]  M. Balkanski,et al.  ELASTIC PROPERTIES OF SINGLE-WALLED CARBON NANOTUBES , 2000 .

[23]  C. Q. Ru,et al.  Effective bending stiffness of carbon nanotubes , 2000 .

[24]  M. Gregory,et al.  Equivalent-Continuum Modeling of Nano-Structured Materials , 2001 .

[25]  P. Kollman,et al.  A Second Generation Force Field for the Simulation of Proteins, Nucleic Acids, and Organic Molecules , 1995 .

[26]  P. Bernier,et al.  Elastic Properties of C and B x C y N z Composite Nanotubes , 1998 .

[27]  A. Rubio,et al.  AB INITIO STRUCTURAL, ELASTIC, AND VIBRATIONAL PROPERTIES OF CARBON NANOTUBES , 1999 .

[28]  David Hui,et al.  The revolutionary creation of new advanced materials - Carbon nanotube composites , 2002 .

[29]  F. Yuan,et al.  Simulation of elastic properties of single-walled carbon nanotubes , 2003 .