Optimality criteria based seismic design of multiple tuned-mass-dampers for the control of 3D irregular buildings

[1]  C. C. Lin,et al.  Two‐stage optimum design of tuned mass dampers with consideration of stroke , 2009 .

[2]  Ananth Ramaswamy,et al.  Multiobjective optimal absorber system for torsionally coupled seismically excited structures , 2003 .

[3]  R. S. Jangid,et al.  Optimum parameters of tuned mass damper for damped main system , 2007 .

[4]  Lei Zuo,et al.  Minimax optimization of multi-degree-of-freedom tuned-mass dampers , 2004 .

[5]  G. B. Warburton,et al.  Optimum absorber parameters for various combinations of response and excitation parameters , 1982 .

[6]  W. K. Tso,et al.  Seismic load distribution in buildings with eccentric setback , 1994 .

[7]  Chi-Chang Lin,et al.  Seismic response reduction of irregular buildings using passive tuned mass dampers , 2000 .

[8]  José L. Almazán,et al.  Torsional balance of asymmetric structures by means of tuned mass dampers , 2012 .

[9]  Oren Lavan,et al.  Gradient based optimal seismic retrofitting of 3D irregular buildings using multiple tuned mass dampers , 2014 .

[10]  C. C. Lin,et al.  Vibration Control Identification of Seismically Excited m.d.o.f. Structure-Ptmd Systems , 2001 .

[11]  T. K. Datta,et al.  PERFORMANCE OF MULTIPLE TUNED MASS DAMPERS FOR TORSIONALLY COUPLED SYSTEM , 1997 .

[12]  Genda Chen,et al.  OPTIMAL PLACEMENT OF MULTIPLE TUNED MASS DAMPERS FOR SEISMIC STRUCTURES , 2001 .

[13]  Anjan Dutta,et al.  Optimal assessment and location of tuned mass dampers for seismic response control of a plan-asymmetrical building , 2007 .

[14]  Oded Amir,et al.  Simultaneous topology and sizing optimization of viscous dampers in seismic retrofitting of 3D irregular frame structures , 2014 .

[15]  Anjan Dutta,et al.  Coupled tuned mass dampers for control of coupled vibrations in asymmetric buildings , 2006 .

[16]  Yoyong Arfiadi,et al.  Optimum Design of Absorber for MDOF Structures , 1998 .

[17]  Oren Lavan,et al.  Fully stressed design of passive controllers in framed structures for seismic loadings , 2006 .

[18]  Izuru Takewaki,et al.  Non-monotonic optimal damper placement via steepest direction search , 1999 .

[19]  Erik A. Johnson,et al.  Distributed Mass Damper System for Integrating Structural and Environmental Controls in Buildings , 2011 .

[20]  Mahendra P. Singh,et al.  Tuned mass dampers for response control of torsional buildings , 2002 .

[21]  Oren Lavan,et al.  Optimal design of supplemental viscous dampers for irregular shear‐frames in the presence of yielding , 2005 .

[22]  Weilian Qu,et al.  Optimum properties of multiple tuned mass dampers for reduction of translational and torsional response of structures subject to ground acceleration , 2006 .

[23]  Yen-Po Wang,et al.  Optimal design theories and applications of tuned mass dampers , 2006 .

[24]  Luigi Petti,et al.  Robust Design of a Single Tuned Mass Damper for Controlling Torsional Response of Asymmetric-Plan Systems , 2008 .

[25]  Keh-Chyuan Tsai,et al.  Coupled Tuned Mass Dampers for the Seismic Control of Asymmetric-Plan Buildings , 2010 .

[26]  W. E. Schmitendorf.  Designing tuned mass dampers via static output feedback , 1998, Computers and Their Applications.

[27]  I. Takewaki,et al.  Optimal damper placement for planar building frames using transfer functions , 2000 .

[28]  Filippo Ubertini,et al.  OPTIMAL DESIGN OF AN ARRAY OF ACTIVE TUNED MASS DAMPERS FOR WIND-EXPOSED HIGH-RISE BUILDINGS , 2013 .

[29]  Fahim Sadek,et al.  A METHOD OF ESTIMATING THE PARAMETERS OF TUNED MASS DAMPERS FOR SEISMIC APPLICATIONS , 1997 .

[30]  Oren Lavan,et al.  Performance based optimal seismic retrofitting of yielding plane frames using added viscous damping , 2010 .

[31]  Izuru Takewaki.  Soil-structure random response reduction via TMD-VD simultaneous use , 2000 .

[32]  A. P. Pansare,et al.  Tuned mass dampers for torsionally coupled systems , 2003 .

[33]  Keh-Chyuan Tsai,et al.  Bi-directional coupled tuned mass dampers for the seismic response control of two-way asymmetric-plan buildings , 2011 .

[34]  Izuru Takewaki,et al.  Optimal damper placement for minimum transfer functions , 1997 .