Influence of process variables and optimization of ethylene yield in oxidative coupling of methane over Li/MgO catalyst

Abstract The effects of operating temperature, inlet oxygen concentration, and F/W on ethylene production by oxidative coupling of methane (OCM) were studied over Li/MgO (Li/Mg = 0.1) catalyst. Central composite experimental design (CCD) and response surface methodology (RSM) were utilized to determine the best operating condition for maximum ethylene production. The design led to three surface responses describing the dependence of methane conversion, ethylene yield, and ethylene selectivity on operating temperature (737–913 °C), inlet oxygen concentration (6.2–23.8 vol.%) and F/W (9280–35,720 ml/g h). The equation models were tested with analysis of variance with 5% level of significance. The results of the analysis revealed that the equation models fitted well with the experimental results for methane conversion and ethylene yield. Numerical results indicated the maximum ethylene yield was 8.14% at optimum operating temperature = 839.51 °C, inlet oxygen concentration = 18.89 vol.% and F/W = 20264.34 ml/g h. Additional experiments were carried out at the optimum condition for verification.

[1]  S. Kuś.  The catalytic performance in oxidative coupling of methane and the surface basicity of La2O3, Nd2O3, ZrO2 and Nb2O5☆ , 2003 .

[2]  Noor Aini Abdul Rashid,et al.  Production of cyclodextrin glucanotransferase (CGTase) from alkalophilic Bacillus sp. TS1-1: media optimization using experimental design , 2004 .

[3]  V. Choudhary,et al.  Comparison of Alkali Metal Promoted MgO Catalysts for Their Surface Acidity/Basicity and Catalytic Activity/Selectivity in the Oxidative Coupling of Methane , 1997 .

[4]  Steven Brown,et al.  Experimental Design and Analysis , 1990 .

[5]  J. Lunsford,et al.  Steady-state conversion of methane to C4+ aliphatic products in high yields using an integrated recycle reactor system , 2000 .

[6]  J. Lunsford,et al.  The Effect of Chloride Ions on a Li+-MgO Catalyst for the Oxidative Coupling of Methane , 1994 .

[7]  A. Machocki.  Methane oxidative coupling in an undiluted reaction mixture in a reactor-adsorber system with gas recirculation , 1996 .

[8]  J. Galuszka.  Carbon dioxide chemistry during oxidative coupling of methane on a Li/MgO catalyst , 1994 .

[9]  Guy Marin,et al.  The oxidative coupling of methane over MgO-based catalysts : a steady-state isotope transient kinetic analysis , 1995 .

[10]  T. Ando,et al.  Role of carbon dioxide in the dehydrogenation of ethane over gallium-loaded catalysts , 2001 .

[11]  V. Choudhary,et al.  Surface properties of rare earth promoted MgO catalysts and their catalytic activity/selectivity in oxidative coupling of methane , 1997 .

[12]  Perry D. Haaland,et al.  Experimental design in biotechnology , 1989 .

[13]  G. E. Keller,et al.  Synthesis of ethylene via oxidative coupling of methane: I. Determination of active catalysts , 1982 .

[14]  K. Aika,et al.  Isotopic Oxygen Exchange between Dioxygen and MgO Catalysts for Oxidative Coupling of Methane , 1997 .

[15]  J. Lunsford.  CATALYTIC CONVERSION OF METHANE TO MORE USEFUL CHEMICALS AND FUELS: A CHALLENGE FOR THE 21ST CENTURY , 2000 .

[16]  K. Seshan,et al.  Oxidative coupling of methane over doped Li/MgO catalysts , 1994 .

[17]  J. Hoebink,et al.  An Investigation of the Oxygen Pathways in the Oxidative Coupling of Methane over MgO-Based Catalysts , 1996 .

[18]  J. Lunsford,et al.  Steady-state conversion of methane to aromatics in high yields using an integrated recycle reaction system , 1997 .

[19]  Miguel Menéndez,et al.  Fluidization of agglomerating particles: influence of the gas temperature and composition on the fluidization of a Li/MgO catalyst , 1997 .