Determination of rotary cutting depth on steel pipes with the abrasive water jet technique

Abrasive water jet (AWJ) cutting is a green machining and processing technology that has found extensive applications. In this study, a well-designed cutting tool with multiple AWJ nozzles has been developed to determine the rotary multi-pass cutting depth on steel pipes that are used in petroleum industries. Experimentally, the multi-pass AWJ cutting depth is found to increase with pump pressure, nozzle diameter, and number of nozzles, but decrease with standoff distance. Also, the multi-pass cutting depth initially increases with rotation speed of the AWJ cutting tool or volumetric concentration of abrasive, and then begins to decline when rotation speed or volumetric concentration reaches a certain value. Mathematically, an empirical model is formulated to determine the rotary cutting depth initiated by multiple cutting passes based on the energy conservation theory. There exists a good agreement between the experimentally measured and theoretically calculated cutting depths with a percentage average absolute deviation of 7.0 per cent.

[1]  G. Batchelor,et al.  An Introduction to Fluid Dynamics , 1968 .

[2]  E. Siores,et al.  Enhancing abrasive waterjet cutting of ceramics by head oscillation techniques , 1996 .

[3]  Mohamed A. Elbestawi,et al.  Modelling of Abrasive Waterjet Machining: A New Approach , 2005 .

[4]  C. A. van Luttervelt,et al.  Analytical and experimental modelling of the abrasive water jet cutting of ductile materials , 1998 .

[5]  R. Kovacevic,et al.  Alternative method for the evaluation of the abrasive water-jet cutting of grey cast iron , 1997 .

[6]  Jun Wang,et al.  Enhancing the AWJ Cutting Performance by Multipass Machining with Controlled Nozzle Oscillation , 2005 .

[7]  A. Momber,et al.  An energy balance of high-speed abrasive water jet erosion , 1999 .

[8]  Mark J. Kaiser,et al.  The non-explosive removal market in the Gulf of Mexico , 2005 .

[9]  James P. Brill,et al.  Multiphase Flow in Wells , 1987 .

[10]  Jun Wang,et al.  Abrasive Waterjet Machining of Engineering Materials , 2003 .

[11]  J. A. McGeough,et al.  An expert process planning system for meat cutting by high pressure water-jet , 1998 .

[12]  Jun Wang,et al.  Particle velocity models for ultra-high pressure abrasive waterjets , 2009 .

[13]  M. Hashish.  A Modeling Study of Metal Cutting With Abrasive Waterjets , 1984 .

[14]  R. Kovacevic,et al.  Machining refractory ceramics with abrasive water jets , 1996, Journal of Materials Science.

[15]  R. Kovacevic,et al.  Test parameter analysis in abrasive water jet cutting of rocklike materials , 1997 .

[16]  M. Hashish,et al.  A Model for Abrasive-Waterjet (AWJ) Machining , 1989 .

[17]  H. Hocheng,et al.  Feasibility Study of Abrasive-Waterjet Milling of Fiber-Reinforced Plastics , 1997 .

[18]  Elias Siores,et al.  Kerf characteristics in abrasive waterjet cutting of ceramic materials , 1996 .

[19]  I. R. Pashby,et al.  Characteristics of the surface of a titanium alloy following milling with abrasive waterjets , 2005 .

[20]  Jun Wang,et al.  A Predictive Depth of Penetration Model for Abrasive Waterjet Cutting of Polymer Matrix Composites , 2002 .

[21]  I. R. Pashby,et al.  The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V , 2009 .

[22]  Jun Wang,et al.  The Cutting Performance in Multipass Abrasive Waterjet Machining of Industrial Ceramics , 2003 .

[23]  N. Ramachandran,et al.  A review of abrasive jet machining , 1993 .

[24]  Jun Wang,et al.  A new model for predicting the depth of cut in abrasive waterjet contouring of alumina ceramics , 2009 .

[25]  Jun Wang,et al.  Profile Cutting on Alumina Ceramics by Abrasive Waterjet. Part 2: Cutting Performance Models , 2006 .

[26]  P. H. Shipway,et al.  Abrasive water-jet controlled depth milling of Ti6Al4V alloy: an investigation of the role of jet-workpiece traverse speed and abrasive grit size on the characteristics of the milled material , 2005 .

[27]  M. Hashish,et al.  Pressure Effects in Abrasive-Waterjet (AWJ) Machining , 1989 .