Side chain sulfonic acid polymers with intrinsic pores in the main chain as proton exchange membranes for fuel cells and redox flow battery

[1]  Abdullah K. Alanazi,et al.  Perfluorosulfonic acid proton exchange membrane with double proton site side chain for high-performance fuel cells at low humidity , 2023, Journal of Materials Science & Technology.

[2]  M. Ouyang,et al.  Hydrogen crossover measurement and durability assessment of high-pressure proton exchange membrane electrolyzer , 2023, Journal of Power Sources.

[3]  L. Jörissen,et al.  Sulfonated Poly(Phenylene sulfone) blend membranes finding their way into proton exchange membrane fuel cells , 2023, Journal of Power Sources.

[4]  Zhenhua Jiang,et al.  Semi-crystalline sulfonated poly(ether ketone) proton exchange membranes: The trade-off of facile synthesis and performance. , 2023, Journal of colloid and interface science.

[5]  Haolin Tang,et al.  Tailoring Ionomer Chemistry for Improved Oxygen Transport in the Cathode Catalyst Layer of Proton Exchange Membrane Fuel Cells , 2023, ACS Applied Energy Materials.

[6]  Jie Yang,et al.  Multidimensional network of polypyrrole nanotubes loaded with ZIF-67 to construct multiple proton transport channels in composite proton exchange membranes for fuel cells , 2023, Journal of Materials Science & Technology.

[7]  Dukjoon Kim,et al.  Ether-Free Sulfonated Poly(Fluorene Biphenyl Indole) Membranes and Ionomer Binders for Proton Exchange Membrane Fuel Cells , 2023, SSRN Electronic Journal.

[8]  K. Geng,et al.  Low Pt loading for high-performance fuel cell electrodes enabled by hydrogen-bonding microporous polymer binders , 2022, Nature communications.

[9]  E. Vivaldo‐Lima,et al.  Room temperature, simple and efficient synthesis and functionalization of aromatic poly(arylene sulfide)s, poly(arylene sulfoxide)s and poly(arylene sulfone)s , 2022, European Polymer Journal.

[10]  Jifu Zheng,et al.  High Conductive Anion Exchange Membranes from All-Carbon Twisted Intrinsic Microporous Polymers , 2022, Macromolecules.

[11]  R. Nagarale,et al.  N-Sulfonated Poly(arylene-oxindole) for Vanadium Redox Flow Battery Applications , 2022, ACS Applied Energy Materials.

[12]  Liang Wu,et al.  Current Challenges and Perspectives of Polymer Electrolyte Membranes , 2022, Macromolecules.

[13]  Zhenhua Jiang,et al.  High Methanol Resistance Semi-Crystalline Sulfonated Poly(Ether Ketone) Proton Exchange Membrane for Direct Methanol Fuel Cell , 2022, SSRN Electronic Journal.

[14]  M. Guiver,et al.  Hydrogen crossover through microporous anion exchange membranes for fuel cells , 2022, Journal of Power Sources.

[15]  M. Tuckerman,et al.  Controlling Hydronium Diffusivity in Model Proton Exchange Membranes. , 2022, The journal of physical chemistry letters.

[16]  M. Guiver,et al.  Fuel cells with an operational range of –20 °C to 200 °C enabled by phosphoric acid-doped intrinsically ultramicroporous membranes , 2022, Nature Energy.

[17]  Jinok Yuk,et al.  Perfluorocyclobutyl-containing multiblock copolymers to induce enhanced hydrophilic/hydrophobic phase separation and high proton conductivity at low humidity , 2022, Journal of Membrane Science.

[18]  Yunqi Li,et al.  Exploration of the Polarization Curve for Proton-Exchange Membrane Fuel Cells. , 2021, ACS applied materials & interfaces.

[19]  N. Brandon,et al.  Designing the next generation of proton-exchange membrane fuel cells , 2021, Nature.

[20]  Jing Guo,et al.  A Microporous Polymer with Suspended Cations for Anion Exchange Membrane Fuel Cells , 2020 .

[21]  Gao Liu,et al.  Sulfonated aromatic polymer as a future proton exchange membrane: A review of sulfonation and crosslinking methods , 2020 .

[22]  Zhen Li,et al.  Trifluoromethanesulfonimide-based hygroscopic semi-interpenetrating polymer network for enhanced proton conductivity of nafion-based proton exchange membranes at low humidity , 2020 .

[23]  K. Oyaizu,et al.  Rechargeable proton exchange membrane fuel cell containing an intrinsic hydrogen storage polymer , 2020, Communications Chemistry.

[24]  S. Holdcroft,et al.  Structure–Property Relationships in Sterically Congested Proton-Conducting Poly(phenylene)s: the Impact of Biphenyl Linearity , 2020, Macromolecules.

[25]  N. McKeown,et al.  Sulfonated microporous polymer membranes with fast and selective ion transport for electrochemical energy conversion and storage. , 2020, Angewandte Chemie.

[26]  Shucheng Liu,et al.  High proton conductivity of MOFs-polymer composite membranes by phosphoric acid impregnation , 2020 .

[27]  Yun Wang,et al.  Materials, technological status, and fundamentals of PEM fuel cells – A review , 2020, Materials Today.

[28]  D. Aili,et al.  Ion-solvating membranes as a new approach towards high rate alkaline electrolyzers , 2019, Energy & Environmental Science.

[29]  Nasrin Siraj Lopa,et al.  Synthesis and characterization of polymer electrolyte membrane containing methylisatin moiety by polyhydroalkylation for fuel cell , 2018 .

[30]  Yunqi Li,et al.  A Simple Self-Cross-Linking Strategy for Double-Layered Proton Exchange Membranes with Improved Methanol Resistance and Good Electrochemical Properties for Passive Direct Methanol Fuel Cells , 2018 .

[31]  K. Miyatake,et al.  Sulfonated Phenylene/Quinquephenylene/Perfluoroalkylene Terpolymers as Proton Exchange Membranes for Fuel Cells , 2018 .

[32]  N. Stock,et al.  Synthesis of phosphonosulfonic acid building blocks as linkers for coordination polymers , 2017 .

[33]  Timothy J. Peckham,et al.  Highly Stable, Low Gas Crossover, Proton-Conducting Phenylated Polyphenylenes. , 2017, Angewandte Chemie.

[34]  H. Na,et al.  Considerations of the Effects of Naphthalene Moieties on the Design of Proton-Conductive Poly(arylene ether ketone) Membranes for Direct Methanol Fuel Cells. , 2016, ACS applied materials & interfaces.

[35]  Haibo Zhang,et al.  Graft octa-sulfonated poly(arylene ether) for high performance proton exchange membrane , 2015 .

[36]  Ragini Gupta,et al.  Air-stable palladium(0) phosphine sulfide catalysts for Ullmann-type C–N and C–O coupling reactions , 2015 .

[37]  Patric Jannasch,et al.  Hypersulfonated polyelectrolytes: preparation, stability and conductivity , 2015 .

[38]  J. Lee,et al.  Sulfonated poly(arylene sulfone) multiblock copolymers for proton exchange membrane fuel cells , 2014 .

[39]  Dong Won Shin,et al.  Morphological transformation during cross-linking of a highly sulfonated poly(phenylene sulfide nitrile) random copolymer , 2012 .

[40]  Nanwen Li,et al.  Enhancement of proton transport by nanochannels in comb-shaped copoly(arylene ether sulfone)s. , 2011, Angewandte Chemie.

[41]  M. Guiver,et al.  Densely Sulfophenylated Segmented Copoly(arylene ether sulfone) Proton Exchange Membranes , 2011 .

[42]  Paul A. Kohl,et al.  Hybrid Anion and Proton Exchange Membrane Fuel Cells , 2009 .

[43]  G. Robertson,et al.  Copoly(arylene ether)s containing pendant sulfonic acid groups as proton exchange membranes , 2009 .

[44]  G. Robertson,et al.  Comb-Shaped Poly(arylene ether sulfone)s as Proton Exchange Membranes† , 2008 .

[45]  H. Yang,et al.  High Proton Conductive and Stable Sulfonated Poly(arylene-alkane) for Fuel Cell with Performance over 2.46 W cm-2 , 2023, Journal of Materials Chemistry A.

[46]  Hui Yang,et al.  Novel ether-free sulfonated poly(biphenyl) tethered with tertiary amine groups as highly stable amphoteric ionic exchange membranes for vanadium redox flow battery , 2021 .

[47]  Yingfang Yao,et al.  A Highly Durable Quercetin-Based Proton Exchange Membrane for Fuel Cells , 2019, Journal of The Electrochemical Society.

[48]  M. Guiver,et al.  A new class of highly-conducting polymer electrolyte membranes: Aromatic ABA triblock copolymers , 2012 .