An Online and Noninvasive Technique for the Condition Monitoring of Capacitors in Boost Converters

Capacitors usually determine the overall lifetime of power converters since they are mainly responsible for breakdowns. Their failure results from the deterioration of their dielectric, the production of gases, and, eventually, their explosion. This process leads to an increase in the capacitor equivalent series resistance (ESR) and a decrease in its capacitance value for both electrolytic and metalized polypropylene film (MPPF) capacitors. In this paper, a novel noninvasive technique for capacitor diagnostic in Boost converters is presented. It can easily be applied online and even in real time, and it is suitable for the operation in both continuous current mode (CCM) and discontinuous current mode (DCM). The technique is based on the double estimations of the ESR and the capacitance, improving the diagnostic reliability. This way, predictive maintenance is provided, and it is possible to alarm for capacitor replacement, avoiding downtime. As the method is intended for railway high-power applications, it has been conceived neither to add any additional hardware in the power stage nor to even slightly modify it. To demonstrate and validate the effectiveness and accuracy of the proposed technique, several simulations and experimental results are discussed in a small prototype. In this prototype, the software for real-time estimation is programmed in a low-cost digital signal processor (DSP).

[1]  André M. S. Mendes,et al.  Fault-Tolerant Operating Strategies Applied to Three-Phase Induction-Motor Drives , 2006, IEEE Transactions on Industrial Electronics.

[2]  Rui Esteves Araujo,et al.  A SIMPLE ESR IDENTIFICATION METHODOLOGY FOR ELECTROLYTIC CAPACITORS CONDITION MONITORING , 2007 .

[3]  Hao Ma,et al.  Fault diagnosis and failure prediction of aluminum electrolytic capacitors in power electronic converters , 2005, 31st Annual Conference of IEEE Industrial Electronics Society, 2005. IECON 2005..

[4]  E RhoadesG,et al.  Expected life of capacitors with non-solid electrolyte. , 1984 .

[5]  J. L. Stevens,et al.  The service life of large aluminum electrolytic capacitors: effects of construction and application , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[6]  V. A. Sankaran,et al.  Electrolytic capacitor life testing and prediction , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[7]  H. N. Nagamani,et al.  A study of electrical endurance of MPPF capacitors and selection of end-point criteria , 1992 .

[8]  Michael L. Gasperi,et al.  Life prediction model for aluminum electrolytic capacitors , 1996, IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting.

[9]  A.M.R. Amaral,et al.  An Online Technique for Estimating the Parameters of Passive Components in Non-Isolated DC/DC Converters , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[10]  M.L. Gasperi,et al.  Life prediction modeling of bus capacitors in AC variable-frequency drives , 2005, IEEE Transactions on Industry Applications.

[11]  A.M.R. Amaral,et al.  ESR Estimation Method for DC/DC Converters Through Simplified Regression Models , 2007, 2007 IEEE Industry Applications Annual Meeting.

[12]  A. Amaral,et al.  Parameter Estimation of a DC/DC Buck converter using a continuous time model , 2007, 2007 European Conference on Power Electronics and Applications.

[13]  Jr. S.G. Parler Improved Spice models of aluminum electrolytic capacitors for inverter applications , 2002 .

[14]  Pascal Venet,et al.  Failure prediction of electrolytic capacitors during operation of a switchmode power supply , 1998 .

[15]  J.A. Melkebeek,et al.  Input current distortion of CCM boost PFC converters operated in DCM , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[16]  A.M.R. Amaral,et al.  Use of ESR to predict failure of output filtering capacitors in boost converters , 2004, 2004 IEEE International Symposium on Industrial Electronics.

[17]  T.G. Habetler,et al.  Condition Monitoring of Electrolytic Capacitor in Power Electronic Circuits using Adaptive Filter Modeling , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[18]  P. Venet,et al.  Realization of a smart electrolytic capacitor circuit , 2002 .

[19]  Dong-Choon Lee,et al.  Online capacitance estimation of DC-link electrolytic capacitors for three-phase AC/DC/AC PWM converters using recursive least squares method , 2005 .

[20]  Pedro Ibañez,et al.  Intelligent PV Module for Grid-Connected PV Systems , 2006, IEEE Transactions on Industrial Electronics.

[21]  P.N. Enjeti,et al.  A Real Time Method to Estimate Electrolytic Capacitor Condition in PWM Adjustable Speed Drives and Uninterruptible Power Supplies , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.

[22]  Harada Kousuke,et al.  Use of ESR for deterioration diagnosis of electrolytic capacitor , 1993 .