Large-Area Nanosphere Self-Assembly by a Micro-Propulsive Injection Method for High Throughput Periodic Surface Nanotexturing.

A high throughput surface texturing process for optical and optoelectric devices based on a large-area self-assembly of nanospheres via a low-cost micropropulsive injection (MPI) method is presented. The novel MPI process enables the formation of a well-organized monolayer of hexagonally arranged nanosphere arrays (NAs) with tunable periodicity directly on the water surface, which is then transferred onto the preset substrates. This process can readily reach a throughput of 3000 wafers/h, which is compatible with the high volume photovoltaic manufacturing, thereby presenting a highly versatile platform for the fabrication of periodic nanotexturing on device surfaces. Specifically, a double-sided grating texturing with top-sided nanopencils and bottom-sided inverted-nanopyramids is realized in a thin film of crystalline silicon (28 μm in thickness) using chemical etching on the mask of NAs to significantly enhance antireflection and light trapping, resulting in absorptions nearly approaching the Lambertian limit over a broad wavelength range of 375-1000 nm and even surpassing this limit beyond 1000 nm. In addition, it is demonstrated that the NAs can serve as templates for replicas of three-dimensional conformal amorphous silicon films with significantly enhanced light harvesting. The MPI induced self-assembly process may provide a universal and cost-effective solution for boosting light utilization, a problem of crucial importance for ultrathin solar cells.

[1]  James Loomis,et al.  15.7% Efficient 10‐μm‐Thick Crystalline Silicon Solar Cells Using Periodic Nanostructures , 2015, Advanced materials.

[2]  W. Warta,et al.  Solar cell efficiency tables (Version 45) , 2015 .

[3]  Dong-Wook Kim,et al.  Wafer-scale nanoconical frustum array crystalline silicon solar cells: promising candidates for ultrathin device applications. , 2014, Nanoscale.

[4]  Shanhui Fan,et al.  Light management for photovoltaics using high-index nanostructures. , 2014, Nature materials.

[5]  Ning Han,et al.  Rational design of inverted nanopencil arrays for cost-effective, broadband, and omnidirectional light harvesting. , 2014, ACS nano.

[6]  Lucio Claudio Andreani,et al.  Towards high efficiency thin-film crystalline silicon solar cells: The roles of light trapping and non-radiative recombinations , 2014 .

[7]  Zixu Sun,et al.  Efficient light trapping in low aspect-ratio honeycomb nanobowl surface texturing for crystalline silicon solar cell applications , 2013 .

[8]  Yi Cui,et al.  All-back-contact ultra-thin silicon nanocone solar cells with 13.7% power conversion efficiency , 2013, Nature Communications.

[9]  Shanhui Fan,et al.  Large-area free-standing ultrathin single-crystal silicon as processable materials. , 2013, Nano letters.

[10]  Ning Han,et al.  Developing controllable anisotropic wet etching to achieve silicon nanorods, nanopencils and nanocones for efficient photon trapping , 2013 .

[11]  Jozef Poortmans,et al.  Photonic assisted light trapping integrated in ultrathin crystalline silicon solar cells by nanoimprint lithography , 2012 .

[12]  Influence of the pattern shape on the efficiency of front-side periodically patterned ultrathin crystalline silicon solar cells , 2012, 1208.2822.

[13]  Gang Chen,et al.  Efficient light trapping in inverted nanopyramid thin crystalline silicon membranes for solar cell applications. , 2012, Nano letters.

[14]  Yi Cui,et al.  Absorption enhancement in ultrathin crystalline silicon solar cells with antireflection and light-trapping nanocone gratings. , 2012, Nano letters.

[15]  Xiaozhou Ye,et al.  Two-dimensionally patterned nanostructures based on monolayer colloidal crystals: Controllable fabrication, assembly, and applications , 2011 .

[16]  Shikuan Yang,et al.  Surface patterning using templates: concept, properties and device applications. , 2011, Chemical Society reviews.

[17]  Po-Yuan Chen,et al.  Fabrication of monolayer of polymer/nanospheres hybrid at a water-air interface. , 2011, ACS applied materials & interfaces.

[18]  J. Rogers,et al.  Performance of ultrathin silicon solar microcells with nanostructures of relief formed by soft imprint lithography for broad band absorption enhancement. , 2010, Nano letters.

[19]  Zongfu Yu,et al.  Nanodome solar cells with efficient light management and self-cleaning. , 2010, Nano letters.

[20]  Wenshan Cai,et al.  Erratum: Plasmonics for extreme light concentration and manipulation , 2010 .

[21]  Peidong Yang,et al.  Light trapping in silicon nanowire solar cells. , 2010, Nano letters.

[22]  Katsuhiko Ariga,et al.  Soft Langmuir–Blodgett Technique for Hard Nanomaterials , 2009 .

[23]  Zhiyong Fan,et al.  Three-dimensional nanopillar-array photovoltaics on low-cost and flexible substrates. , 2009, Nature materials.

[24]  Yi Cui,et al.  Wafer-scale silicon nanopillars and nanocones by Langmuir-Blodgett assembly and etching , 2008 .

[25]  L. J. Guo,et al.  Nanoimprint Lithography: Methods and Material Requirements , 2007 .

[26]  Sarah Kim,et al.  Nanomachining by colloidal lithography. , 2006, Small.

[27]  T. Odom,et al.  Large-area nanoscale patterning: chemistry meets fabrication. , 2006, Accounts of chemical research.

[28]  G. Whitesides,et al.  New approaches to nanofabrication: molding, printing, and other techniques. , 2005, Chemical reviews.

[29]  M. Geissler,et al.  Patterning: Principles and Some New Developments , 2004 .

[30]  Michael Giersig,et al.  Shadow Nanosphere Lithography: Simulation and Experiment , 2004 .

[31]  E. Palik.  Handbook of Optical Constants of Solids , 1997 .

[32]  D. A. Saville,et al.  Field-Induced Layering of Colloidal Crystals , 1996, Science.

[33]  L. Scriven,et al.  The Marangoni Effects , 1960, Nature.