Effect of Casting Thickness on Microstructure and Mechanical Properties of the High-W Superalloy K416B
暂无分享,去创建一个
Yi-zhou Zhou | Xiao-feng Sun | Jinguo Li | Jin-jiang Yu | N. Sheng | G. Hou | De-long Shu | J. Xie | Qi Li
[1] I. Steinbach,et al. Effect of γ′ precipitate size on hardness and creep properties of Ni-base single crystal superalloys: Experiment and simulation , 2020 .
[2] J. Cormier,et al. Solidification rate driven microstructural stability and its effect on the creep property of a polycrystalline nickel-based superalloy K465 , 2020 .
[3] J. Sieniawski,et al. Effect of cooling rate on macro- and microstructure of thin-walled nickel superalloy precision castings , 2020 .
[4] D. Raabe,et al. Deformation of Borides in Nickel-based Superalloys: a Study of Segregation at Dislocations , 2019, Microscopy and Microanalysis.
[5] Dierk Raabe,et al. The effect of chromium and cobalt segregation at dislocations on nickel-based superalloys , 2018 .
[6] H. Ding,et al. Coupling effects of tungsten and molybdenum on microstructure and stress-rupture properties of a nickel-base cast superalloy , 2017 .
[7] J. Qin,et al. Evolution of Fe–rich phases in Mg melt and a novel method for separating Al and Fe from Al–Si–Fe alloys , 2017 .
[8] Kui Liu,et al. Effect of cooling rate on microstructure, microsegregation and mechanical properties of cast Ni-based superalloy K417G , 2017 .
[9] Xiao-feng Sun,et al. Thermodynamics analysis and precipitation behavior of fine carbide in K416B Ni-based superalloy with high W content during creep , 2015 .
[10] M. Rahimian,et al. A physical simulation study of the effect of thermal variations on the secondary dendrite arm spacing in a Ni-based superalloy , 2014 .
[11] Jianguo Li,et al. Evolution of microstructures at a wide range of solidification cooling rate in a Ni-based superalloy , 2013 .
[12] D. Browne,et al. The influence of cooling conditions on grain size, secondary phase precipitates and mechanical properties of biomedical alloy specimens produced by investment casting. , 2013, Journal of the mechanical behavior of biomedical materials.
[13] M. Rahimian,et al. Microstructure and hardness evolution in MAR-M247 Ni-based superalloy processed by controlled cooling and double heat treatment , 2013 .
[14] Jianguo Li,et al. Microstructural Evolution with a Wide Range of Solidification Cooling Rates in a Ni-Based Superalloy , 2013, Metallurgical and Materials Transactions. A.
[15] Weiguo Zhang,et al. Solidification microstructure of directionally solidified superalloy under high temperature gradient , 2012, Rare Metals.
[16] B. Ge,et al. Study of γ/γ′ Interfaces in Nickel-Based, Single-Crystal Superalloys by Scanning Transmission Electron Microscopy , 2011 .
[17] R. J. Mitchell,et al. The influence of cooling rate from temperatures above the γ′ solvus on morphology, mismatch and hardness in advanced polycrystalline nickel-base superalloys , 2008 .
[18] L. Dobrzański,et al. Effect of cooling rate on the solidification behavior of AC AlSi7Cu2 alloy , 2007 .
[19] Liangfu Zheng. Formation of eutectic (γ′ + α) and α transformation in Ta-bearing high W content cast Ni-base superalloys , 2005 .
[20] Shusuo Li,et al. ABNORMAL PHASES IN HIGH W CONTENT NICKEL BASE SUPERALLOYS AND PHASE CONTROL , 2004 .
[21] J. Lee,et al. The eutectic characteristic of MC-type carbide precipitation in a DS nickel-base superalloy , 1999 .
[22] P. Weidman,et al. On the drag of model dendrite , 1992, Metallurgical and Materials Transactions A.
[23] C. Schwarz. Die rechnerische Behandlung der Abkühlungs- und Erstarrungsvorgänge bei flüssigem Metall. II , 1931 .