Boron nitride stamp for ultra-violet nanoimprinting lithography fabricated by focused ion beam lithography

Cubic boron nitride (c-BN) is one of the hardest known materials (second after diamond). It has a high level of chemical resistance and high UV transmittance. In this study, a stamp for ultra-violet nanoimprint lithography (UV-NIL) was fabricated using a bi-layered BN film deposited on a quartz substrate. Deposition of the BN was done using RF magnetron sputtering. A hexagonal boron nitride (h-BN) layer was deposited for 30 min before c-BN was deposited for 30 min. The thickness of the film was measured as 160 nm. The phase of the c-BN layer was investigated using Fourier transform infrared (FTIR) spectrometry, and it was found that the c-BN layer has a 40% cubic phase. The deposited film was patterned using focused ion beam (FIB) lithography for use as a UV-NIL stamp. Line patterns were fabricated with the line width and line distance set at 150 and 150 nm, respectively. The patterning process was performed by applying different currents to observe the effect of the current value on the pattern profile. The fabricated patterns were investigated using AFM, and it was found that the pattern fabricated by applying a current value of 50 picoamperes (pA) has a better profile with a 65 nm line depth. The UV transmittance of the 160 nm thick film was measured to be 70-86%. The hardness and modulus of the BN was measured to be 12 and 150 GPa, respectively. The water contact angle of the stamp surface was measured at 75°. The stamp was applied to UV-NIL without coating with an anti-adhesion layer. Successful imprinting was proved via scanning electron microscope (SEM) images of the imprinted resin.

[1]  D. Medlin,et al.  Review of advances in cubic boron nitride film synthesis , 1997 .

[2]  D. Ottesen,et al.  Substrate effects in cubic boron nitride film formation , 1996 .

[3]  Wei Zhang,et al.  6 nm half-pitch lines and 0.04 µm2 static random access memory patterns by nanoimprint lithography , 2005 .

[4]  Gérard Demazeau,et al.  Cubic boron nitride: synthesis, physicochemical properties and applications , 1991 .

[5]  W. J. Zhang,et al.  The roles of hydrogen and fluorine in the deposition of cubic boron nitride films in the Ar–N2–BF3–H2 system , 2000 .

[6]  Eung-Sug Lee,et al.  UV-nanoimprint lithography using an elementwise patterned stamp , 2004 .

[7]  Hangsheng Yang,et al.  Mechanical properties of boron nitride films prepared by plasma-enhanced chemical vapor deposition , 2005 .

[8]  O. Takai,et al.  Nanomechanical properties through nanoindentation method of amorphous carbon and carbon nitride films synthesized by shielded arc ion plating , 2005 .

[9]  P. Rogl.  Materials science of ternary metal boron nitrides , 2001 .

[10]  D. Lichtenwalner,et al.  GROWTH AND CHARACTERIZATION OF CUBIC BORON NITRIDE THIN FILMS , 1994 .

[11]  H. Holleck.  Material selection for hard coatings , 1986 .

[12]  D. Choi,et al.  Fabrication of fluorine-doped diamond-like carbon stamps for UV nanoimprint lithography. , 2006, Nanotechnology.

[13]  A. Balogh,et al.  Deposition of B4C/BCN/c-BN multilayered thin films by r.f. magnetron sputtering , 2006 .

[14]  H. Kong,et al.  Effective fabrication of three-dimensional nano/microstructures in a single step using multilayered stamp , 2006 .

[15]  R. Haubner,et al.  Diamond growth by hot-filament chemical vapor deposition: state of the art , 1993 .

[16]  Kenji Watanabe,et al.  Low-frequency Raman scattering of Be-doped cubic boron nitride , 2003 .

[17]  T. Sugino,et al.  Electron emission from nanocrystalline boron nitride films synthesized by plasma-assisted chemical vapor deposition , 1998 .

[18]  Stephen Y. Chou,et al.  Imprint of sub-25 nm vias and trenches in polymers , 1995 .