Generation of prescribed strain waves in an elastic bar by use of piezoelectric actuators driven by a linear power amplifier

The problem of generating prescribed strain waves in an elastic bar by means of a pair of piezoelectric actuators driven in phase by a linear power amplifier was considered theoretically and experimentally. The power amplifier was characterized by its DC voltage gain and 3 dB cut-off frequency unloaded, and by its output resistance and inductance. With the assumption of one-dimensional (1D) wave propagation in the bar, including the actuator region, a linear difference equation was derived for the required input voltage to the power amplifier in terms of the strain associated with the prescribed wave. This difference equation was solved numerically for a bell-shaped strain wave and for a single-period sine strain wave. After identification of the linear power amplifier, two tests were carried out with the aim to generate the two strain waves in an aluminium bar instrumented with semi-conductor strain gauges. Very good agreement was obtained between the implemented and required input voltages, output voltages and output currents of the power amplifier, and good agreement was achieved between the implemented and prescribed strain waves.

[1]  Aditi Chattopadhyay,et al.  Simultaneous Modeling of Mechanical and Electrical Response of Smart Composite Structures , 2002 .

[2]  Rudolf Sippel,et al.  Development and manufacture of an adaptive lightweight mirror for space application , 2003 .

[3]  Nesbitt W. Hagood,et al.  Modelling of Piezoelectric Actuator Dynamics for Active Structural Control , 1990 .

[4]  Torsten Söderström,et al.  A Mechanical Wave Diode: Using Feedforward Control for One-Way Transmission of Elastic Extensional Waves , 2007, IEEE Transactions on Control Systems Technology.

[5]  Anindya Ghoshal,et al.  Transient vibration of smart structures using a coupled piezoelectric-mechanical theory , 2004 .

[6]  Christopher Niezrecki,et al.  Improving the Power Consumption Characteristics of Piezoelectric Actuators , 1994 .

[7]  K.K. Tan,et al.  Assisted reproduction system using piezo actuator , 2004, 2004 International Conference on Communications, Circuits and Systems (IEEE Cat. No.04EX914).

[8]  E. Crawley,et al.  Use of piezoelectric actuators as elements of intelligent structures , 1987 .

[9]  Scott D. Snyder,et al.  A Study of the Response of a Simply Supported Beam to Excitation by a Piezoelectric Actuator , 1992 .

[10]  Robert Puers,et al.  Towards the limits in detecting low-level strain with multiple piezo-resistive sensors , 2000 .

[11]  Bengt Lundberg,et al.  Piezoelectric generation of extensional waves in a viscoelastic bar by use of a linear power amplifier : Theoretical basis , 2007 .

[12]  Herbert Kolsky,et al.  Stress Waves in Solids , 2003 .

[13]  Nesbitt W. Hagood,et al.  Damping of structural vibrations with piezoelectric materials and passive electrical networks , 1991 .

[14]  T. Ikeda.  Fundamentals of piezoelectricity , 1990 .

[15]  Donald J. Leo,et al.  Energy Analysis of Piezoelectric-Actuated Structures Driven by Linear Amplifiers , 1999, Adaptive Structures and Material Systems.