Comparing positive and negative tone development process for printing the metal and contact layers of the 32- and 22-nm nodes
暂无分享,去创建一个
Geert Vandenberghe | Shinji Tarutani | Joost Bekaert | Mario Reybrouck | Frederic Lazzarino | Vincent Truffert | Lieve Van Look
[1] Carlos Fonseca,et al. Optimum tone for various feature types: positive versus negative , 2001, SPIE Advanced Lithography.
[2] Gregory M. Wallraff,et al. IBM-JSR 193-nm negative tone resist: polymer design, material properties, and lithographic performance , 2004, SPIE Advanced Lithography.
[3] Jeff D. Byers,et al. Negative-tone 193-nm resists , 2000, Advanced Lithography.
[4] Mireille Maenhoudt,et al. Ultimate contact hole resolution using immersion lithography with line/space imaging , 2009, Advanced Lithography.
[5] Ryoichi Takasu,et al. Process Feasibility Investigation of Freezing Free Process , 2009 .
[6] Jian Yin,et al. Freezing Materials For Double Patterning , 2009 .
[7] G. Vandenberghe,et al. Freeform illumination sources: an experimental study of source-mask optimization for 22-nm SRAM cells , 2010, Advanced Lithography.
[8] Shiro Kusumoto,et al. Freezing Material Development for Double Patterning Process , 2009 .
[9] S. Tarutani,et al. Materials and Processes of Negative Tone Development for Double Patterning Process , 2009 .
[10] Jun Iwashita,et al. Topcoat-free ArF negative tone resist , 2009, Advanced Lithography.
[11] Keita Katou,et al. Resist material for negative tone development process , 2010, Advanced Lithography.
[12] Geert Vandenberghe,et al. Hyper-NA imaging of 45nm node random CH layouts using inverse lithography , 2008, SPIE Advanced Lithography.